Rename-NetIPsecMainModeRule

Rename-NetIPsecMainModeRule

Renames a single main mode rule.

구문

Parameter Set: ByAssociatedNetFirewallAddressFilter
Rename-NetIPsecMainModeRule -AssociatedNetFirewallAddressFilter <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallProfile
Rename-NetIPsecMainModeRule -AssociatedNetFirewallProfile <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetIPsecMainModeCryptoSet
Rename-NetIPsecMainModeRule -AssociatedNetIPsecMainModeCryptoSet <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetIPsecPhase1AuthSet
Rename-NetIPsecMainModeRule -AssociatedNetIPsecPhase1AuthSet <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByDisplayName
Rename-NetIPsecMainModeRule -DisplayName <String[]> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByName
Rename-NetIPsecMainModeRule [-Name] <String[]> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByQuery
Rename-NetIPsecMainModeRule -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String[]> ] [-DisplayGroup <String[]> ] [-Enabled <Enabled[]> ] [-GPOSession <String> ] [-Group <String[]> ] [-MainModeCryptoSet <String[]> ] [-PassThru] [-Phase1AuthSet <String[]> ] [-PolicyStore <String> ] [-PolicyStoreSource <String[]> ] [-PolicyStoreSourceType <PolicyStoreType[]> ] [-PrimaryStatus <PrimaryStatus[]> ] [-Status <String[]> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: GetAll
Rename-NetIPsecMainModeRule -NewName <String> [-All] [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Rename-NetIPsecMainModeRule -InputObject <CimInstance[]> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Rename-NetIPsecMainModeRule cmdlet renames a main mode rule. When creating a rule, if the Name parameter is not specified, then a random GUID is used. This cmdlet specifies a friendly and descriptive rule name. Note: The NewName parameter value must be unique since it identifies a single rule object on the computer.

This cmdlet gets a main mode rule to be renamed with the Name parameter (default), the DisplayName parameter, rule properties, or by associated filters or objects. The Name parameter from the queried rule is replaced by the NewName parameter value. Note: Only one firewall can be renamed at a time when copying to the same policy store. This is because only a single firewall can use the unique identifier, or name, specified by the NewName parameter.

To modify the localized DisplayName parameter, run the Set-NetIPsecMainModeRule cmdlet with the NewDisplayName parameter.

Names are unique identifiers for rules, similar to file names. Each name must be unique within a given policy store. If rules in multiple GPOs have the same name, then one of the GPOs will overwrite the other based upon GPO precedence. If a rule from a GPO has the same name as a rule from the persistent store, then the rule from the GPO will overwrite the local rule. This can be used to create overlapping policies, where the same rule is placed in multiple GPOs, and if both rules are applied to a computer, then the overlapping parts of the policies will only be created once. For this reason, two rules should only have the same name if the same function is to be performed. For instance, if the built-in local firewall rules, such as Core Networking or File & Printer Sharing rules, are copied to a domain GPO, then any local versions of those rules are overridden. However, if different GPOs specify different scopes with the same rule names, then the GPOs will become much harder to effectively manage.

매개 변수

-All

Indicates that all of the main mode rules within the specified policy store are renamed.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-AsJob

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-AssociatedNetFirewallAddressFilter<CimInstance>

Gets the IPsec rules that are associated with the given address filter to be renamed.
A NetFirewallAddressFilter object represents the address conditions associated with a rule. See the Get-NetFirewallAddressFilter cmdlet for more information.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	True (ByValue)
와일드카드 문자 허용 여부	false

-AssociatedNetFirewallProfile<CimInstance>

Gets the firewall rules that are associated with the given port filter to be renamed.
A NetFirewallPortFilter object represents the profile conditions associated with a rule. See the Get-NetFirewallProfile cmdlet for more information.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	True (ByValue)
와일드카드 문자 허용 여부	false

-AssociatedNetIPsecMainModeCryptoSet<CimInstance>

Gets the main mode rules that are associated, via the pipeline, with the input main mode cryptographic set to be renamed.
A NetIPsecMainModeCryptoSet object represents a main mode cryptographic conditions associated with a main mode rule. This parameter sets the methods for the main mode negotiation by describing the proposals for encryption. See the Get-NetIPsecMainModeCryptoSet cmdlet for more information.
Alternatively, the MainModeCryptoSet parameter can be used for the same purpose, but does not allow the cryptographic set to be piped into this cmdlet and the set must be specified with the Name parameter.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	True (ByValue)
와일드카드 문자 허용 여부	false

-AssociatedNetIPsecPhase1AuthSet<CimInstance>

Gets the main mode rules that are associated with the given phase 1 authentication set to be renamed.
A NetIPsecPhase1AuthSet object represents the phase 1 authorization set conditions associated with an IPsec or main mode rule. This parameter sets the methods for main mode negotiation by describing the proposals for computer authentication. See the Get-NetIPsecPhase1AuthSet cmdlet for more information.
Alternatively, the Phase1AuthSet parameter can be used for the same purpose, but does not allow the authentication set to be piped into the cmdlet and the set must be specified with the Name parameter.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	True (ByValue)
와일드카드 문자 허용 여부	false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭	Session
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Description<String[]>

Specifies that matching main mode rules of the indicated description are renamed. Wildcard characters are accepted.
This parameter provides information about the main mode rule. This parameter specifies a localized, user-facing description of the object.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-DisplayGroup<String[]>

Specifies that only matching main mode rules of the indicated group association are renamed. Wildcard characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a localizable string, then the Group parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetIPsecMainModeRule cmdlet, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is good practice to specify the Group parameter with a universal and world-ready indirect @FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetIPsecMainModeRule cmdlet, but can be modified using dot notation and the Set-NetIPsecMainModeRule cmdlet.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-DisplayName<String[]>

Specifies that only matching main mode rules of the indicated display name are renamed. Wildcard characters are accepted.
This parameter specifies the localized, user-facing name of the main mode rule. When creating a rule this parameter is required. This parameter value is locale-dependent. If the object is not modified, this parameter value may change in certain circumstances. When writing scripts in multi-lingual environments, the Name parameter should be used instead, where the default value is a randomly assigned value.
Note: This parameter cannot be All.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Enabled<Enabled[]>

Specifies that matching main mode rules of the indicated state are renamed.
This parameter specifies that the rule object is administratively enabled or administratively disabled. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- True: Specifies the rule is currently enabled.
-- False: Specifies the rule is currently disabled. A disabled rule will not actively modify computer behavior, but the rule still exists on the computer so it can be re-enabled.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-GPOSession<String>

Specifies the network GPO from which to retrieve the rules to be renamed.
This parameter is used in the same way as the PolicyStore parameter. When modifying Group Policy Objects (GPOs) in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Group<String[]>

Specifies that only matching main mode rules of the indicated group association are renamed. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then this parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetIPsecMainModeRule cmdlet, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is good practice to specify this parameter with a universal and world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetIPsecMainModeRule cmdlet, but can be modified using dot notation and the Set-NetIPsecMainModeRule cmdlet.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-InputObject<CimInstance[]>

이 cmdlet에 대한 입력을 지정합니다. 이 매개 변수를 사용하거나 입력을 이 cmdlet으로 파이프할 수 있습니다.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	True (ByValue)
와일드카드 문자 허용 여부	false

-MainModeCryptoSet<String[]>

Gets the IPsec main mode rules that are associated with the given main mode cryptographic set to be renamed.
Specifies, by name, the main mode cryptographic set to be associated with the main mode rule.
A NetIPsecMainModeCryptoSet object represents a main mode cryptographic conditions associated with a main mode rule. This parameter sets the methods for main mode negotiation by describing the proposals for encryption. This is only associated with main mode rules. See the Get-NetIPsecMainModeCryptoSet cmdlet for more information. Alternatively, the AssociatedNetIPsecMainModeCryptoSet parameter can be used for the same purpose, but is used to pipe the input set into the rule.
Note: When specifying cryptographic sets, the Name parameter value of the cryptographic set must be used. The object cannot be directly passed into this cmdlet.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Name<String[]>

Specifies that only matching main mode rules of the indicated name are renamed. Wildcard characters are accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. Since GPOs can have precedence, if an administrator that gives a rule with a different or more specific rule the same name in a higher-precedence GPO, then it overrides other rules that exist.
The default value is a randomly assigned value.
When the defaults for main mode encryption are overridden, specify the customized parameters and set this parameter value, making this parameter the new default setting for encryption.

별칭	ID
필수 여부	true
위치	1
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-NewName<String>

Specifies the new name for one or more main mode rules.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Phase1AuthSet<String[]>

Gets the main mode rules that are associated with the given phase 1 authentication set to be renamed.
This parameter specifies, by name, the Phase 1 authentication set to be associated with the main mode rule.
A NetIPsecPhase1AuthSet object represents the phase 1 authentication conditions associated with an IPsec or main mode rule. This parameter sets the methods for main mode negotiation by describing the proposals for computer authentication. See the New-NetIPsecAuthProposal cmdlet of more information. Alternatively, the AssociatedNetIPsecPhase1AuthSet parameter can be used for the same purpose, but is used to pipe the input set into the rule.
Note: When specifying authentication sets, the Name parameter value of the authentication set must be used. The object cannot be directly passed into this cmdlet.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-PolicyStore<String>

Specifies the policy store from which to retrieve the rules to be renamed.
A policy store is a container for firewall and IPsec policy.
이 매개 변수에 허용되는 값은 다음과 같습니다.
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- Group Policy Objects (GPOs) are also policy stores. Computer GPOs can be specified as follows.
------ –PolicyStore hostnamehostname.
---- Active Directory GPOs can be specified as follows.
------ –PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server® 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecMainModeRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with the Copy-NetIPsecMainModeRule cmdlet or with the New-NetIPsecMainModeRule cmdlet.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-PolicyStoreSource<String[]>

Specifies that main mode rules that match the indicated policy store source are renamed.
This parameter contains a path to the policy store where the rule originated if the object is retrieved from the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
The monitoring output from this parameter is not completely compatible with the PolicyStore parameter. This parameter value cannot always be passed into the PolicyStore parameter. Domain GPOs are one example in which this parameter contains only the GPO name, not the domain name.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-PolicyStoreSourceType<PolicyStoreType[]>

Specifies the type of policy store where the rule originated if the object is retrieved from the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Local: The object originates from the local store.
-- GroupPolicy: The object originates from a GPO.
-- Dynamic: The object originates from the local runtime state. This policy store name is not valid for use in the cmdlets, but may appear when monitoring active policy.
-- Generated: The object was generated automatically. This policy store name is not valid for use in the cmdlets, but may appear when monitoring active policy.
-- Hardcoded: The object was hard-coded. This policy store name is not valid for use in the cmdlets, but may appear when monitoring active policy.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-PrimaryStatus<PrimaryStatus[]>

Specifies that main mode rules that match the indicated primary status are renamed.
This parameter describes the overall status of the rule.
-- OK: Specifies that the rule will work as specified.
-- Degraded: Specifies that one or more parts of the rule will not be enforced.
-- Error: Specifies that the computer is unable to use the rule at all.
See the Status and StatusCode fields of the object for more detailed status information.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Status<String[]>

Specifies that main mode rules that match the indicated status are renamed.
This parameter describes the status message for the specified status code value. The status code is a numerical value that indicates any syntax, parsing, or runtime errors in the rule. This parameter value should not be modified.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-TracePolicyStore

Indicates that the main mode rules that match the indicated policy store are renamed.
This parameter specifies that the name of the source GPO is queried and set to the PolicyStoreSource parameter value.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

필수 여부	false
위치	named
기본값	false
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

필수 여부	false
위치	named
기본값	false
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\AssociatedNetIPsecMainModeCryptoSet

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetAddressFilter

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetFirewallProfile

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetIKEP1AuthSet

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetMainModeRule[]

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• None

예제

EXAMPLE 1

This example renames a main mode rule so that the identifier is descriptive and user friendly.

PS C:\> Rename-NetIPsecMainModeRule –Name "{ed8384a9-a78b-4d0d-8f3d-eb5615edb4a0}" -NewName "Tunnel Mode - Americas (DA Client)"

관련 항목

Copy-NetIPsecMainModeRule

Disable-NetIPsecMainModeRule

Get-NetFirewallAddressFilter

Get-NetFirewallProfile

Get-NetIPsecMainModeCryptoSet

Get-NetIPsecPhase1AuthSet

New-NetIPsecMainModeRule

Open-NetGPO

Save-NetGPO

Set-NetIPsecMainModeRule

New-NetIPsecAuthProposal

New-GPO