Set-NetFirewallSecurityFilter

Set-NetFirewallSecurityFilter

Modifies security filter objects, thereby modifying the Authentication, Encryption, OverrideBlockRules, LocalUser, RemoteUser, and RemoteMachine conditions of the firewall rules.

구문

Parameter Set: Query (cdxml)
Set-NetFirewallSecurityFilter [-AsJob] [-Authentication <Authentication> ] [-CimSession <CimSession[]> ] [-Encryption <Encryption> ] [-GPOSession <String> ] [-LocalUser <String> ] [-OverrideBlockRules <Boolean> ] [-PassThru] [-PolicyStore <String> ] [-RemoteMachine <String> ] [-RemoteUser <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Set-NetFirewallSecurityFilter -InputObject <CimInstance[]> [-AsJob] [-Authentication <Authentication> ] [-CimSession <CimSession[]> ] [-Encryption <Encryption> ] [-LocalUser <String> ] [-OverrideBlockRules <Boolean> ] [-PassThru] [-RemoteMachine <String> ] [-RemoteUser <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-NetFirewallSecurityFilter cmdlet modifies the security conditions associated with the input firewall rules.

See the Get-NetFirewallSecurityFilter cmdlet for more information on the security filters.

To modify the security conditions, two methods can be used starting with the security filters returned by the Get-NetFirewallSecurityFilter cmdlet and optional additional querying.
-- The network firewall security filter objects can be piped into the Get-NetFirewallRule cmdlet. The Get-NetFirewallRule cmdlet returns the rules associated with the filters and pipes the rules into the Set-NetFirewallRule cmdlet, which configures the interface properties.
-- Alternatively, piping the network firewall security filter objects directly to this cmdlet modifies the Authentication, Encryption, OverrideBlockRules, LocalUser, RemoteUser, and RemoteMachine parameters of the rules.

매개 변수

-AsJob

-Authentication<Authentication>

Specifies that authentication is required on firewall rules.
이 매개 변수에 허용되는 값은 다음과 같습니다. NotRequired, Required, or NoEncap.
-- NotRequired: Any network packet matches this rule, that it is protected by IPsec. This option is the equivalent of not selecting the allow only secure connections option in the Windows Firewall with Advanced Security MMC snap-in.
-- Required: Network packets that are authenticated by IPsec match this rule. A separate IPsec rule must be created to authenticate the traffic. This option is the equivalent of the allow only secure connections option in the Windows Firewall with Advanced Security MMC snap-in.
-- NoEncap: Network connections that are authenticated, but not encapsulated by Encapsulating Security Payload (ESP) or Authentication Header (AH) match this rule. This option is useful for connections that must be monitored by network equipment, such as intrusion detection systems (IDS), that are not compatible with ESP NULL-protected network packets. The initial connection is authenticated by IPsec by using AuthIP, but the quick mode SA permits clear-text traffic. To use this option, you must also configure an IPsec rule that specifies authentication with encapsulation none as a quick mode security method. In the Microsoft Management Console (MMC), authentication and encryption are combined into one set of radio buttons. In Windows Management Instrumentation (WMI) or Windows PowerShell®, authentication and encryption are given as two separate options.
The default value is Required.
Note: A rule can be queried for this condition, or modified by using the security filter object.

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-Encryption<Encryption>

Specifies that encryption in authentication is required on firewall rules. The authentication is done through a separate IPsec or main mode rule.
이 매개 변수에 허용되는 값은 다음과 같습니다. NotRequired, Required, or Dynamic.
-- NotRequired: Encryption is not required for authentication.
-- Required: Encryption is required for authentication through an IPsec rule.
-- Dynamic: This is authdynenc in the netsh command-line.
The default value is NotRequired.
Note: A rule can be queried for this condition, or modified by using the security filter object.

-GPOSession<String>

Targets the network GPO from which to retrieve the rules to be modified.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.

-InputObject<CimInstance[]>

이 cmdlet에 대한 입력을 지정합니다. 이 매개 변수를 사용하거나 입력을 이 cmdlet으로 파이프할 수 있습니다.

-LocalUser<String>

Specifies the principals to which the network traffic this firewall rule should apply. This is an SDDL string. The principals, represented by SIDs in the SDDL string, can be services, users, application containers, or any other SID that network traffic could be associated with. This parameter specifies that only network packets that are authenticated as coming from or going to a principal identified in the list of accounts (SID) match this rule.
Note: Querying for rules with this parameter can only be performed using filter objects.

-OverrideBlockRules<Boolean>

Allows matching network traffic that would otherwise be modified. The network traffic must be authenticated by using a separate IPsec rule.
If the Direction parameter is set to Inbound, then this parameter is valid only for rules that have one or more accounts listed in the RemoteUser parameter and optionally the RemoteMachine parameter. Network packets that match this rule and that are successfully authenticated against a computer account specified in the RemoteUser parameter and against a user account identified in the RemoteMachine parameter are permitted through the firewall.
If this parameter is specified, then the Authentication parameter cannot be set to NotRequired. This parameter is equivalent to the override block rules checkbox in the Windows Firewall with Advanced Security MMC snap-in.
For computers that are running Windows® 7 or Windows Server 2008 R2, this parameter is permitted on an outbound rule. Selecting this parameter on an outbound rule causes matching traffic to be permitted through this rule even if other matching rules would block the traffic. No accounts are required in the RemoteMachine or RemoteUser parameter for an outbound bypass rule, however, if authorized or excepted computers are listed in those groups the rules will be enforced.
This parameter is not valid on outbound rules on computers that are running or earlier.
Note: Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallSecurityFilter cmdlet for more information.

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-PolicyStore<String>

Targets the policy store from which to retrieve the rules to be modified.
A policy store is a container for firewall and IPsec policy.
이 매개 변수에 허용되는 값은 다음과 같습니다.
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ –PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ –PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server® 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetFirewallRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with the Copy-NetFirewallRule cmdlet or with the New-NetFirewallRule cmdlet.

-RemoteMachine<String>

Specifies that matching IPsec rules of the indicated computer accounts are modified. This parameter specifies that only network packets that are authenticated as incoming from or outgoing to a computer identified in the list of computer accounts (SID) match this rule. This parameter value is specified as an SDDL string.
Note: Querying for rules with this parameter can only be performed using filter objects.

-RemoteUser<String>

Specifies that matching IPsec rules of the indicated user accounts are modified. This parameter specifies that only network packets that are authenticated as incoming from or outgoing to a user identified in the list of user accounts (SID) match this rule. This parameter value is specified as an SDDL string.
Note: Querying for rules with this parameter can only be performed using filter objects.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetNetworkLayerSecurityFilter[]

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetNetworkLayerSecurityFilter[]

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

예제

EXAMPLE 1

This example modifies the user field of a particular firewall rule.

PS C:\> $users = New-Object -TypeName System.Security.Principal.NTAccount ("corp.contoso.com\Administrators")

PS C:\> $SIDofSecureUserGroup = $users.Translate([System.Security.Principal.SecurityIdentifier]).Value

PS C:\> $SecureMachineGroupSDDL = "D:(A;;CC;;; $SIDofSecureUserGroup)"

PS C:\> $nfSecurityFilter = Get-FirewallRule –DisplayName "Authorize Secure Computer" | Get-NetFirewallSecurityFilter

PS C:\> Set-NetFirewallSecurityFilter –RemoteMachine $SecureMachineGroupSDDL -InputObject $nfSecurityFilter

This cmdlet can be run using only the pipeline.

PS C:\> Get-FirewallRule –DisplayName "Authorize Secure Computer" | Get-NetFirewallSecurityFilter | Set-NetFirewallSecurityFilter –RemoteMachine $SecureMachineGroupSDDL

This cmdlet can be run without the pipeline.

PS C:\> Set-NetFirewallRule –DisplayName "Authorize Secure Computer" –RemoteMachine $SecureMachineGroupSDDL

EXAMPLE 2

This example modifies the security condition associated with the Printer firewall rules by requesting authenticated traffic.

PS C:\> $nfSecurityFilter = Get-NetFirewallRule –DisplayGroup "*Printer*" | Get-NetFirewallSecurityFilter

PS C:\> Set-NetFirewallSecurityFilter –Authentication Request –InputObject $nfSecurityFilter

This cmdlet can be run using only the pipeline.

PS C:\> Get-NetFirewallRule –DisplayGroup "*Printer*" | Get-NetFirewallSecurityFilter | Set-NetFirewallSecurityFilter –Authentication Request

관련 항목

Get-NetFirewallRule

Get-NetFirewallSecurityFilter

Get-NetIPSecRule

New-NetFirewallRule

New-NetIPSecRule

Open-NetGPO

Save-NetGPO

Set-NetFirewallRule

Set-NetIPSecRule

New-GPO