Remove-DhcpServerInDC
Remove-DhcpServerInDC
Deletes the specified Dynamic Host Configuration Protocol (DHCP) server service from the list of authorized DHCP server services in Active Directory (AD).
구문
Parameter Set: Remove2
Remove-DhcpServerInDC [[-DnsName] <String> ] [[-IPAddress] <IPAddress> ] [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Remove-DhcpServerInDC cmdlet deletes the specified Dynamic Host Configuration Protocol (DHCP) server service from the list of authorized DHCP server services in Active Directory (AD).
When neither the DnsName nor the IPAddress parameter is specified, then the local DHCP server service will be removed from the list of authorized DHCP server services in AD.
If only the DnsName parameter is specified, then the DHCP server service running on the computer with the specified DNS name will be removed from the list of authorized DHCP server services in AD.
If the DnsName and the IPAddress parameters are specified, then the DHCP server service running on the computer with specified values will be removed from the list of authorized DHCP server services in AD.
If only the IPAddress parameter is specified, then an error is returned.
In addition to removing the computer running the DHCP server service in DC, this cmdlet also triggers the DHCP server service to perform an authorization check.
The trigger for authorization check will be done even if the removal of computer running the DHCP server service fails with an object already exists error.
The following warning will be displayed if the computer running the DHCP server service does not exist in AD and the trigger for the server authorization check succeeded:
- The DHCP server is already de-authorized in Active Directory. The authorization check on the DHCP server has been initiated.
The following warning will be displayed if the computer running the DHCP server service does not exist in AD, but the trigger for the server authorization check failed:
- The DHCP server is already de-authorized in Active Directory. Failed to initiate the authorization check on the DHCP server. Error code: %d
The following warning will be displayed if the deletion of the computer running the DHCP server service in AD succeeded, but the trigger for the server authorization check failed:
- The DHCP server has been successfully de-authorized in Active Directory. Failed to initiate the authorization check on the DHCP server. Error code: %d
If the deletion of computer running the DHCP server service to AD fails with an error other than object_does not already_exists_error, then an error is returned and authorization check on the server is not triggered.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DnsName<String>
Specifies the DNS name of the computer, on which the DHCP server service is running, to de-authorize.
별칭 |
없음 |
필수 여부 |
false |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-IPAddress<IPAddress>
Specifies the IP address of the computer, on which the DHCP server service is running, to de-authorize.
별칭 |
없음 |
필수 여부 |
false |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerInDC
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerInDC
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
EXAMPLE 1
This example deletes the object in the AD domain for the DHCP server service running on the computer with the DNS name dhcpserver.contoso.com and the IP address 10.10.10.2, thereby de-authorizing the DHCP server service for clients on the network.
PS C:\> Remove-DhcpServerInDC -DnsName dhcpserver.contoso.com -IPAddress 10.10.10.2
EXAMPLE 2
This example deletes an object in the AD domain for the DHCP server service running on the computer with the DNS name dhcpserver.contoso.com, thereby de-authorizing the DHCP server service for the clients on the network. The IP address for computer running the DHCP server service object in AD will be obtained by looking up dhcpserver.contoso.com in DNS.
PS C:\> Remove-DhcpServerInDC -DnsName dhcpserver.contoso.com
EXAMPLE 3
This example deletes an object in the AD domain for the DHCP server service running on the local computer.
PS C:\> Remove-DhcpServerInDC