Remove-DhcpServerv4PolicyIPRange

Remove-DhcpServerv4PolicyIPRange

Deletes an IP range from an existing policy at the scope level.

Syntax

Parameter Set: Remove2
Remove-DhcpServerv4PolicyIPRange [-Name] <String> [-ScopeId] <IPAddress> [[-StartRange] <IPAddress> ] [[-EndRange] <IPAddress> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Detailed Description

The Remove-DhcpServerv4PolicyIPRange cmdlet deletes an IP range from an existing policy at the scope level.

If neither the StartRange nor the EndRange parameter is specified, then all of the IP address ranges associated with the policy are deleted.

If only the StartRange parameter is specified, then the policy IP address range which has the specified starting address is deleted.

If only the EndRange parameter is specified, then the policy IP address range which has the specified ending address is deleted.

Parameters

-AsJob

-CimSession<CimSession[]>

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

-ComputerName<String>

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the Dynamic Host Configuration Protocol (DHCP) server service.

-EndRange<IPAddress>

Specifies the ending IP address of the IP address range to delete from the policy.

-Name<String>

Specifies the name of the policy for which one or more associated IP address ranges are deleted.

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

-ScopeId<IPAddress>

Specifies the scope identifier (ID), in IPv4 address format, which contains the specified policy.

-StartRange<IPAddress>

Specifies the starting IP address of the IP address range to delete from the policy.

-ThrottleLimit<Int32>

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

-Confirm

Prompts you for confirmation before running the cmdlet.

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

<CommonParameters>

This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see    about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv4Policy

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv4PolicyIPRange

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv4Scope

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

The output type is the type of the objects that the cmdlet emits.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv4PolicyIPRange[]

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Examples

EXAMPLE 1

This example deletes the IP address range from 10.10.10.10 through 10.10.10.20 that is associated with the policy named HyperVPolicy in the scope 10.10.10.0.

PS C:\> Remove-DhcpServerv4PolicyIPRange -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -Name HyperVPolicy -StartRange 10.10.10.10 -EndRange 10.10.10.20

EXAMPLE 2

This example deletes all of the IP address ranges associated with the policy named HyperVPolicy in the scope 10.10.10.0.

PS C:\> Remove-DhcpServerv4PolicyIPRange -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -Name HyperVPolicy

EXAMPLE 3

This example deletes the IP address range starting from 10.10.10.10 that is associated with the policy named HyperVPolicy in the scope 10.10.10.0.

PS C:\> Remove-DhcpServerv4PolicyIPRange -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -Name HyperVPolicy -StartRange 10.10.10.10

EXAMPLE 4

This example deletes the IP address range ending at 10.10.10.10 that is associated with the policy named HyperVPolicy in the scope 10.10.10.0.

PS C:\> Remove-DhcpServerv4PolicyIPRange -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -Name HyperVPolicy -EndRange 10.10.10.20

Related topics

Add-DhcpServerv4PolicyIPRange

Get-DhcpServerv4PolicyIPRange