Add-DhcpServerv4Policy

Add-DhcpServerv4Policy

Adds a new policy either at the server level or at the scope level.

구문

Parameter Set: Add0
Add-DhcpServerv4Policy [-Name] <String> [-Condition] <String> [-AsJob] [-CimSession <CimSession[]> ] [-CircuitId <String[]> ] [-ClientId <String[]> ] [-ComputerName <String> ] [-Description <String> ] [-Enabled <Boolean> ] [-Fqdn <String[]> ] [-LeaseDuration <TimeSpan> ] [-MacAddress <String[]> ] [-PassThru] [-ProcessingOrder <UInt16> ] [-RelayAgent <String[]> ] [-RemoteId <String[]> ] [-ScopeId <IPAddress> ] [-SubscriberId <String[]> ] [-ThrottleLimit <Int32> ] [-UserClass <String[]> ] [-VendorClass <String[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Add-DhcpServerv4Policy cmdlet adds a new policy either at the server level or at the scope level. The policy name must be unique at the level, either server or specific scope, where the policy is added and should have at least one condition as specified by the CircuitId, ClientId, Fqdn, MACAddress, RelayAgent, RemoteId, SubscriberId, UserClass, or VendorClass parameter.

매개 변수

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭

Session

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CircuitId<String[]>

Specifies the comparator to use and the values with which to compare the circuit id sub-option. The first element is the comparator, either EQ or NE, followed by a single value.
    If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The value can again be followed by another comparator, either EQ or NE, which is followed by another value for comparison.
The input format for the value is a hexadecimal string with or without hyphen separation.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-ClientId<String[]>

Specifies the comparator to use and the values with which to compare client identifier. The first element is the comparator, either EQ or NE, and subsequent elements are values.
If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, either EQ or NE, which is followed by another set of values for comparison.
The input format is a hexadecimal string with or without hyphen separation. For example: EQ, 00-11-22-33-44-55, AA-BB-CC-DD-EE*.
The output format is a hexadecimal string with hyphen separation.
The values following the EQ operator will be treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator will be treated as multiple assertions which are logically differenced (AND’d).

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-ComputerName<String>

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.

별칭

Cn

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Condition<String>

Specifies the logical operator between conditions when multiple conditions are specified. 이 매개 변수에 허용되는 값은 다음과 같습니다. AND or OR.

별칭

없음

필수 여부

true

위치

3

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Description<String>

Specifies the description string of the policy being added.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Enabled<Boolean>

Specifies the enabled state of a policy. 이 매개 변수에 허용되는 값은 다음과 같습니다. True or False.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Fqdn<String[]>

Specifies the comparator to use and the values with which to compare the fully qualified domain name (FQDN) in the client request. The first element is the comparator, EQ, NE, Isl, or Insl, and the subsequent elements are values. For the comparators Island Insl, use a blank value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a string. A trailing wildcard character can be present to indicate partial match.
The values following the EQ operator are treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator are treated as multiple assertions which are logically differenced (AND’d).

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-LeaseDuration<TimeSpan>

Specifies the duration of the lease for clients that match the policy.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-MacAddress<String[]>

Specifies the comparator to use and the values with which to compare the MAC Address in the client request. The first element is the comparator, EQ or NE, and the subsequent elements are values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a hexadecimal string with or without hyphen separation. A trailing wildcard character can be present to indicate partial match. For example: 00-1F-3B-7C-B7-89, 00-1F-3B-7C-B7-*, 001F3B7CB789.
The output format is a hexadecimal string with hyphen separation.
The values following the EQ operator will be treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator will be treated as multiple assertions which are logically differenced (AND’d).

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Name<String>

Specifies the name of the policy to be added.

별칭

없음

필수 여부

true

위치

2

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-ProcessingOrder<UInt16>

Specifies the order of this policy with respect to other policies in the scope or server. The DHCP server service will process the policies in the specified order while evaluating client requests.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-RelayAgent<String[]>

Specifies the comparator to use and values with which to compare the relay agent information. The first element is the comparator, EQ or NE, and subsequent elements are values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a hexadecimal string with or without hyphen separation.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-RemoteId<String[]>

Specifies the comparator to use and values with which to compare the remote ID sub-option. The first element is the comparator, EQ or NE, followed by a single value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The value can again be followed by another comparator, EQ or NE, which is followed by another value.
The input format for the value is a hexadecimal string with or without hyphen separation.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-ScopeId<IPAddress>

Specifies the scope identifier, in IPv4 address format, in which the policy is being added.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-SubscriberId<String[]>

Specifies the comparator to use and the values with which to compare the subscriber ID sub-option. The first element is the comparator, EQ or NE, and followed by a single value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The value can again be followed by another comparator, EQ or NE, which is followed by another value.
The input format is a hexadecimal string with or without hyphen separation.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-UserClass<String[]>

Specifies the comparator to use and the user class values to compare with the user class field in the client request. The first element to be specified is the comparator, EQ or NE, and the subsequent elements are values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The values to be specified are the user class names which already exist on the server.
The values following the EQ operator are treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator are treated as multiple assertions which are logically differenced (AND’d).

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-VendorClass<String[]>

Specifies the comparator to use and vendor class values to compare with the vendor class field in the client request. The first element is the comparator, EQ or NE, and the subsequent elements are values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The values to be specified are the vendor class names which already exist on the server.
The values following the EQ operator are treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator are treated as multiple assertions which are logically differenced (AND’d).

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

예제

EXAMPLE 1

This example creates a server level policy for virtual machine (VM) clients. The MAC addresses of Hyper-V VMs (00-15-5D) and VMWare VMs (00-05-69) are used as a condition in the policy.

PS C:\> Add-DhcpServerv4Policy -Name HyperVPolicy -Condition OR -MacAddress EQ,00155D*,000569*

EXAMPLE 2

This example creates a server level policy for non-VM clients. The MAC address of Hyper-V VMs (00-15-5D) and VMware VMs (000569) is used as a negation condition in the policy.

PS C:\> Add-DhcpServerv4Policy -Name PhysicalComputersPolicy -Condition OR -MacAddress NE,00155D*,000569*

EXAMPLE 3

This example creates a scope level policy for virtual machine (VM) clients inside the scope 10.10.10.0. The MAC addresses of Hyper-V VMs (00-15-5D) and VMware VMs (00-05-69) are used as a condition in the policy.

PS C:\> Add-DhcpServerv4Policy -Name VMPolicy -ScopeId 10.10.10.0 -Condition OR -MacAddress EQ,00155D*,000569*

EXAMPLE 4

This example creates a printer policy inside the scope 10.10.10.0 based on the vendor class of printers. The vendor classes need to be defined before being used in the policy.

PS C:\> Add-DhcpServerv4Policy -Name PrinterPolicy -ScopeId 10.10.10.0 -Condition OR -VendorClass EQ,"HP Printer","Xerox Printer"

EXAMPLE 5

This example creates a lab computers policy inside the scope 10.10.10.0 based on the user class. The user class needs to be defined before being used in the policy.

PS C:\> Add-DhcpServerv4Policy -Name LabComputerPolicy -ScopeId 10.10.10.0 -Condition OR -UserClass EQ,LabComputers

EXAMPLE 6

This example creates a policy based on the relay agent information (option 82) inside the scope 10.10.10.0. The DHCP relay agent needs to be configured with the relay agent information option (option 82).

PS C:\> Add-DhcpServerv4Policy -Name RelayAgentBasedPolicy -ScopeId 10.10.10.0 -Condition OR -RelayAgent EQ,01030a0b0c02050000000123

EXAMPLE 7

This example creates a policy by combining conditions, using OR, based on MAC address prefix of HTC phone devices and vendor class of Android, inside the scope 10.10.10.0. The vendor class needs to be defined before being used in the policy.

PS C:\> Add-DhcpServerv4Policy -Name DevicesPolicy -ScopeId 10.10.10.0 -Condition OR -MacAddress EQ,F8DB7F* -VendorClass EQ,Android

EXAMPLE 8

This example creates a server level policy for virtual machine (VM) clients and assigns a processing order of 2 and creates the policy in a disabled state. The MAC addresses of Hyper-V VMs (00-15-5D) and VMWare VMs (00-05-69) are used as a condition in the policy.

PS C:\> Add-DhcpServerv4Policy -Name HyperVPolicy -Condition OR -MacAddress EQ,00155D*,000569* -ProcessingOrder 2 -Enabled False

EXAMPLE 9

This example creates a policy by combining conditions, using OR, based on MAC address prefix of HTC phone devices and vendor class of Android, inside the scope 10.10.10.0. The vendor class needs to be defined before being used in the policy. In addition, the command sets the lease duration for the clients to 10 days.

PS C:\> Add-DhcpServerv4Policy -Name DevicesPolicy -Condition OR -LeaseDuration 10 -MacAddress EQ,F8DB7F -ScopeId 10.10.10.0 -VendorClass EQ,Android

EXAMPLE 10

This example creates a server level policy for workgroup joined clients. The policy matches clients that have a single label FQDN in the conditions in the policy.

PS C:\> Add-DhcpServerv4Policy -Name WorkgroupDevices -Condition OR -Fqdn Isl

EXAMPLE 11

This example creates a server level policy for all foreign clients that are not members of the local domain contoso.com. The policy matches clients that have an FQDN that does not contain the value contoso.com.

PS C:\> Add-DhcpServerv4Policy -Name ForeignDevices -Condition OR -Fqdn NE,*.contoso.com

관련 항목

Add-DhcpServerv4PolicyIPRange

Get-DhcpServerv4Policy

Get-DhcpServerv4PolicyIPRange

Remove-DhcpServerv4Policy

Remove-DhcpServerv4PolicyIPRange

Set-DhcpServerv4Policy