Set-DhcpServerv6DnsSetting

Set-DhcpServerv6DnsSetting

Configures how the Dynamic Host Configuration Protocol (DHCP) server service updates the DNS server with the client-related information.

구문

Parameter Set: Set1
Set-DhcpServerv6DnsSetting [[-Prefix] <IPAddress> ] [[-IPAddress] <IPAddress> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-DeleteDnsRROnLeaseExpiry <Boolean> ] [-DynamicUpdates <String> ] [-NameProtection <Boolean> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-DhcpServerv6DnsSetting cmdlet configures how the Dynamic Host Configuration Protocol (DHCP) server service updates the DNS server with the client-related information. The Prefix or IPAddress parameter must be specified with at least one of the optional parameters. The Prefix and IPAddress cannot both be specified. If neither the Prefix nor IPAddress parameter is specified, then this cmdlet sets DNS update setting at the server level.

This cmdlet modifies the effective DNS update setting and sets it on the specified reservation, scope, or server level.

매개 변수

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭

Session

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-ComputerName<String>

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.

별칭

Cn

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-DeleteDnsRROnLeaseExpiry<Boolean>

Specifies that the DHCP server service should delete the DNS resource records for the DHCP client after the lease expires.
이 매개 변수에 허용되는 값은 다음과 같습니다. $true or $false. This parameter can only be set if the DynamicUpdate parameter is set to Always or OnClientRequest.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-DynamicUpdates<String>

Specifies the conditions under which to perform dynamic updates on the DNS server.
이 매개 변수에 허용되는 값은 다음과 같습니다. Always, Never, or OnClientRequest.
-- Always: The DHCP server service will always perform dynamic DNS registration of A and PTR records for the DHCP clients.
-- Never: The DHCP server service will not perform any dynamic DNS registration.
-- OnClientRequest: The DHCP server service will perform dynamic DNS registration of A and PTR records if the DHCP client has requested for the same in the DHCP client message.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-IPAddress<IPAddress>

Specifies the IPv6 address of the reservation on which the DNS update behavior is being configured.

별칭

ReservedIP

필수 여부

false

위치

3

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-NameProtection<Boolean>

Sets the enabled state for the name protection on the DHCP server service.
If this parameter is specified and there is an existing DNS record already by the same name, then the DNS update for the client will fail instead of being overwritten.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Prefix<IPAddress>

Specifies the subnet prefix of the IPv6 scope on which the DNS update behavior is being configured.

별칭

없음

필수 여부

false

위치

2

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

예제

EXAMPLE 1

This example sets the DHCPv6 server level, or server-wide, DNS update configuration settings to always update DNS with leases entries, enables NAP protection by creating dynamic host configuration identifier (DHCID) resource records, and deletes the client entry from the DNS server when the lease expires.

PS C:\> Set-DhcpServerv6DnsSetting -ComputerName dhcpserver.contoso.com -DynamicUpdates Always -DeleteDnsRRonLeaseExpiry $true

EXAMPLE 2

This example sets the DNS update configuration settings for scope 2001:4898:7020:1020:: to update the DNS server with lease entries based on client request using the fully qualified domain name (FQDN) option (ID 81), and enables name protection by creating dynamic host configuration identifier (DHCID) resource records.

PS C:\> Set-DhcpServerv6DnsSetting -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -DynamicUpdates OnClientRequest -NameProtection $true

EXAMPLE 3

This example sets the DNS update configuration settings for the reserved IP address 2001:4898:7020:1020::5 to never update the DNS server for client lease entries.

PS C:\> Set-DhcpServerv6DnsSetting -ComputerName dhcpserver.contoso.com -IPAddress 2001:4898:7020:1020::5 -DynamicUpdates Never

관련 항목

Get-DhcpServerv6DnsSetting