Set-DhcpServerv4Policy

Set-DhcpServerv4Policy

Sets the properties of an existing policy either at the server level or at the specified scope level.

구문

Parameter Set: Set3
Set-DhcpServerv4Policy [-Name] <String> [[-ScopeId] <IPAddress> ] [-AsJob] [-CimSession <CimSession[]> ] [-CircuitId <String[]> ] [-ClientId <String[]> ] [-ComputerName <String> ] [-Condition <String> ] [-Description <String> ] [-Enabled <Boolean> ] [-Fqdn <String[]> ] [-LeaseDuration <TimeSpan> ] [-MacAddress <String[]> ] [-NewName <String> ] [-PassThru] [-ProcessingOrder <UInt16> ] [-RelayAgent <String[]> ] [-RemoteId <String[]> ] [-SubscriberId <String[]> ] [-ThrottleLimit <Int32> ] [-UserClass <String[]> ] [-VendorClass <String[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-DhcpServerv4Policy cmdlet sets the properties of an existing policy either at the server level or at the specified scope level. If the CircuitId, ClientId, Fqdn, MACAddress, RelayAgent, RemoteId, SubscriberId, UserClass, or VendorClass parameter is specified, then the conditions of the policy are being changed and this cmdlet will behave as follows:

If the VendorClass parameter is specified and the policy being modified already has conditions for the VendorClass parameter value, then the existing VendorClass parameter value is removed and the new VendorClass parameter value will be added.

However, if the policy being modified has conditions for the MacAddress parameter value, then the MacAddress parameter value is not altered and is logically combined (ORꞌd) or differenced (ANDꞌd) with the VendorClass-based conditions.

The same applies to any of the CircuitId, ClientId, Fqdn, MACAddress, RelayAgent, RemoteId, SubscriberId, UserClass, or VendorClass parameters used in the conditions.

매개 변수

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭

Session

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CircuitId<String[]>

Specifies the comparator to use and the values with which to compare the circuit identifier (ID) sub-option. The first element is the comparator, EQ or NE, followed by a single value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The value can be followed by another comparator, EQ or NE, which is followed by another value.
The input format for the value is a hexadecimal string with or without hyphen separation.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-ClientId<String[]>

Specifies the comparator to use and the values with which to compare the client identifier. The first element is the comparator, EQ or NE, followed by a set of values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a hexadecimal string with or without hyphen separation. The output format is a hexadecimal string with hyphen separation.
The values following the EQ operator will be treated as multiple assertions which are logically combined (ORꞌd).
The values following the NE operator will be treated as multiple assertions which are logically differenced (ANDꞌd).
An example of the format is: EQ, 00-11-22-33-44-55, AA-BB-CC-DD-EE*.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-ComputerName<String>

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the Dynamic Host Configuration Protocol (DHCP) server service.

별칭

Cn

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Condition<String>

Specifies the logical operator between the conditions when multiple conditions are specified. 이 매개 변수에 허용되는 값은 다음과 같습니다. AND or OR.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Description<String>

Specifies the description to set on the policy.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Enabled<Boolean>

Specifies the enabled state for the policy. 이 매개 변수에 허용되는 값은 다음과 같습니다. True or False.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Fqdn<String[]>

Specifies the comparator to use and the values with which to compare the fully qualified domain name (FQDN) in the client request. The first element is the comparator, EQ, NE, Isl, or Insl and the subsequent elements are values. For the comparators Island Insl, use a blank value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a string. A trailing wildcard character can be present to indicate partial match.
The values following the EQ operator are treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator are treated as multiple assertions which are logically differenced (AND’d).

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-LeaseDuration<TimeSpan>

Specifies the duration of the lease for clients that match the policy.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-MacAddress<String[]>

Specifies the comparator to use and the values with which to compare the MAC Address in the client request. The first element is the comparator, EQ or NE, followed by a set of values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a hexadecimal string with or without hyphen separation. A trailing wildcard character can be used to indicate partial match. The output format is a hexadecimal string with hyphen separation.
The values following the EQ operator will be treated as multiple assertions which are logically combined (ORꞌd).
The values following the NE operator will be treated as multiple assertions which are logically differenced (ANDꞌd).
An example of the format is: 00-1F-3B-7C-B7-89, 00-1F-3B-7C-B7-*, 001F3B7CB789.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Name<String>

Specifies the name of the policy being modified.

별칭

없음

필수 여부

true

위치

2

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-NewName<String>

Specifies the new name to set for the policy.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-ProcessingOrder<UInt16>

Specifies the order for this policy with respect to other policies in the scope or DHCP server service. The DHCP server service will process the policies in the specified order while evaluating client requests using the configured policies.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-RelayAgent<String[]>

Specifies the comparator to use and the values with which to compare the relay agent information. The first element is the comparator, EQ or NE, followed by a set of values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a hexadecimal string with or without hyphen separation.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-RemoteId<String[]>

Specifies the comparator to use and the values with which to compare the remote ID suboption. The first element is the comparator, EQ or NE, followed by a single value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The value can again be followed by another comparator, EQ or NE, which is followed by another value.
The input format for the value is a hexadecimal string with or without hyphen separation.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-ScopeId<IPAddress>

Specifies the scope ID, in IPv4 address format, of the scope which contains the policy. If this parameter is not specified, then the server level policy is modified.

별칭

없음

필수 여부

false

위치

3

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-SubscriberId<String[]>

Specifies the comparator to use and the values with which to compare the subscriber ID suboption. The first element is the comparator, EQ or NE, and followed by a single value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The value can again be followed by another comparator, EQ or NE, which is followed by another value.
The input format is a hexadecimal string with or without hyphen separation.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-UserClass<String[]>

Specifies the comparator to use and the user class values with which to compare the user class field in the client request. The first element to be specified is the comparator, EQ or NE, and followed by a set values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can be followed by another comparator, EQ or NE, which is followed by another set of values.
The values to be specified must be the user class names that already exist on the DHCP server service.
The format of the value should be a hexadecimal string starting with 0x.
The values following the EQ operator are treated as multiple assertions which are logically combined (ORꞌd).
The values following the NE operator are treated as multiple assertions which are logically differenced (ANDꞌd).

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-VendorClass<String[]>

Specifies the comparator to use and the vendor class values with which to compare the vendor class field in the client request. The first element is the comparator, EQ or NE, followed by a set of values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can be followed by another comparator. EQ or NE, which is followed by another set of values.
The values to be specified must be the vendor class names that already exist on the DHCP server service.
The format of the value should be a hexadecimal string starting with 0x.
The values following the EQ operator are treated as multiple assertions which are logically combined (ORꞌd).
The values following the NE operator are treated as multiple assertions which are logically differenced (ANDꞌd).

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

예제

EXAMPLE 1

This example renames the server level policy named DevicesPolicy to TabletPolicy, sets a description string, disables the policy, and sets the processing order to 4.

PS C:\> Set-DhcpServerv4Policy -ComputerName dhcpserver.contoso.com -Name DevicesPolicy -NewName TabletPolicy -Description "policy for tablet devices" -ProcessingOrder 4 -Enabled False

EXAMPLE 2

This example modifies the conditions of the server level policy for non-Hyper-V clients. If the policy had an existing MAC address based condition, then the same condition is replaced with the condition specified in this cmdlet. However, if the policy had conditions based on other fields, such as the VendorClass, UserClass, ClientId, or RelayAgent parameters, then those will be retained and logically combined (ORꞌd) with the newly added MAC address based condition.

PS C:\> Set-DhcpServerv4Policy -Name PhysicalMachinesPolicy -Condition OR -MacAddress NE,00155D*,000569*

EXAMPLE 3

This example modifies the conditions of the server level policy for non-Hyper-V clients. If the policy had an existing MAC address based condition, a vendor class based policy, or both, then the conditions are replaced with the condition specified in this cmdlet.

PS C:\> Set-DhcpServerv4Policy -Name PhysicalMachinesPolicy -Condition OR -MacAddress NE,00155D*,000569* -VendorClass ""

EXAMPLE 4

This example sets the lease duration for the server level policy named TabletPolicy to 10 days for the specified computer.

PS C:\> Set-DhcpServerv4Policy -Name TabletPolicy -ComputerName dhcpserver.contoso.com -LeaseDuration 10

관련 항목

Add-DhcpServerv4Policy

Add-DhcpServerv4PolicyIPRange

Get-DhcpServerv4Policy

Get-DhcpServerv4PolicyIPRange

Remove-DhcpServerv4Policy

Remove-DhcpServerv4PolicyIPRange