Get-DhcpServerv6Class
Get-DhcpServerv6Class
Gets the IPv6 vendor or user class from the Dynamic Host Configuration Protocol (DHCP) server service.
구문
Parameter Set: Get1
Get-DhcpServerv6Class [[-Name] <String[]> ] [[-Type] <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Get-DhcpServerv6Class cmdlet gets the IPv6 vendor or user class from the Dynamic Host Configuration Protocol (DHCP) server service.
If only the Type parameter is specified, then all of the classes of the specified class type on the DHCP server service are retrieved.
If neither the Name nor the Type parameter is specified, then all of the user and vendor classes on the DHCP server service are retrieved.
If only the Name parameter is specified, then the class for that Name parameter value will be returned.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Name<String[]>
Specifies the name of the vendor or user class which is to be retrieved.
별칭 |
없음 |
필수 여부 |
false |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Type<String>
Specifies the type of the class. 이 매개 변수에 허용되는 값은 다음과 같습니다. Vendor or User.
별칭 |
없음 |
필수 여부 |
false |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6Class
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6Class[]
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
EXAMPLE 1
This example gets all of the DHCPv6 class definitions, both vendor and user, which are present on the DHCP server service.
PS C:\> Get-DhcpServerv6Class -ComputerName dhcpserver.contoso.com
EXAMPLE 2
This example gets all of the DHCPv6 vendor class definitions which are present on the DHCP server service.
PS C:\> Get-DhcpServerv6Class -ComputerName dhcpserver.contoso.com -Type Vendor
EXAMPLE 3
This example gets the DHCPv6 vendor class definition for the vendor class named MSUCClient.
PS C:\> Get-DhcpServerv6Class -ComputerName dhcpserver.contoso.com -Name MSUCClient