Remove-DhcpServerv6Lease
Remove-DhcpServerv6Lease
Deletes one or more IPv6 lease records from the Dynamic Host Configuration Protocol (DHCP) server service.
구문
Parameter Set: IPAddress
Remove-DhcpServerv6Lease -IPAddress <IPAddress[]> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: Prefix
Remove-DhcpServerv6Lease [-Prefix] <IPAddress> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
Deletes one or more IPv6 lease records from the Dynamic Host Configuration Protocol (DHCP) server service. If the Prefix parameter is specified, then this cmdelt removes all of the leases for the specified prefix. If the IPAddress parameter is specified, then this cmdlet deletes the specified leases.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IPAddress<IPAddress[]>
Specifies one or more IPv6 addresses for which the lease records are deleted from the DHCP server service.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Prefix<IPAddress>
Specifies the IPv6 subnet prefix of the scope from which the leases are deleted.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6Lease
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6Scope
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6Lease[]
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
EXAMPLE 1
This example deletes all of the IP address leases inside the scope 2001:4898:7020:1020:: from the DHCP server service running on the computer named dhcpserver.contoso.com.
PS C:\> Remove-DhcpServerv6Lease -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020::
EXAMPLE 2
This example deletes the IP address leases for 2001:4898:7020:1020::10 and 2001:4898:7020:1030::20 from the DHCP server service running on the computer named dhcpserver.contoso.com.
PS C:\> Remove-DhcpServerv6Lease -ComputerName dhcpserver.contoso.com -IPAddress 2001:4898:7020:1020::10,2001:4898:7020:1030::20
EXAMPLE 3
This example deletes all of the IPv6 address leases from the scope 2001:4898:7020:1020::. The Get-DhcpServerv6Lease cmdlet returns the IP address lease objects and pipes the objects into this cmdlet, which deletes each of the address leases.
PS C:\> Get-DhcpServerv6Lease -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: | Remove-DhcpServerv6Lease -ComputerName dhcpserver.contoso.com
EXAMPLE 4
The above command deletes all IPv6 address leases from all the DHCPv6 scopes. The cmdlet Get-DhcpServerv6Scope cmdlet returns the DHCPv6 scope objects and pipe the objects into this cmdlet, which deletes each of the address leases passed through the pipeline.
PS C:\> Get-DhcpServerv6Scope -ComputerName dhcpserver.contoso.com | Remove-DhcpServerv6Lease -ComputerName dhcpserver.contoso.com