Set-Net6to4Configuration

Set-Net6to4Configuration

Sets the 6to4 configuration for both client computers and servers.

Syntax

Parameter Set: ByName
Set-Net6to4Configuration [[-State] <State> ] [[-AutoSharing] <State> ] [[-RelayName] <String> ] [[-RelayState] <State> ] [[-ResolutionIntervalSeconds] <UInt32> ] [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-IPInterface <CimInstance> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Set-Net6to4Configuration [[-State] <State> ] [[-AutoSharing] <State> ] [[-RelayName] <String> ] [[-RelayState] <State> ] [[-ResolutionIntervalSeconds] <UInt32> ] -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Detailed Description

The Set-Net6to4Configuration cmdlet sets the 6to4 configuration of both client computers and servers.

6to4 is an address assignment and router-to-router automatic tunneling technology that is described in RFC 3056: Connection of IPv6 Domains via IPv4 Clouds. 6to4 provides a globally-routable IPv6 address to a host with a public IPv4 address. This IPv6 address can be used to connect to other 6to4 hosts or the IPv6 Internet.

This cmdlet is similar in functionality to the netsh interface 6to4 context command.

Parameters

-AsJob

-AutoSharing<State>

Determines if 6to4 prefixes are forwarded when Internet Connection Sharing (ICS) is enabled. By default, 6to4 prefixes are forwarded.

-CimSession<CimSession[]>

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

-GPOSession<String>

Specifies the Group Policy session in which to store the 6to4 configuration information.
You can use this parameter with the NetGPO cmdlets to aggregate multiple operations performed on a Group Policy Object (GPO).
You cannot use this parameter with the PolicyStore parameter.

-InputObject<CimInstance[]>

Specifies the object which contains the 6to4 configuration to modify.

-IPInterface<CimInstance>

Specifies the IP interface on which to set the 6to4 configuration.

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

-PolicyStore<String>

Specifies the policy store that contains the configuration to set.
The acceptable values for this parameter are:
-- PersistentStore
-- ActiveStore
-- GPO
To set the configuration of a GPO, specify the GPO name using the following format: Domain\GPOName
You cannot use this parameter with the GPOSession parameter.

-RelayName<String>

Specifies a 6to4 relay name. If 6to4 connectivity is not available on the computer, the relay name setting has no effect.

-RelayState<State>

Configures the 6to4 relay state.
The acceptable values for this parameter are:
-- Default: If the host has link-local only IPv6 connectivity and a public IPv4 address, then 6to4 is enabled. If there is no global IPv6 address present and no global IPv4 address present, then the host does not have a 6to4 interface. If there is no global IPv6 address present but there is a global IPv4 address present, then the host has a 6to4 interface.
-- Enabled: If there is a global IPv4 address present, then the host has a 6to4 interface. If there is no global IPv4 address present, then the host does not have a 6to4 interface.
-- Disabled: 6to4 is turned off and connectivity with 6to4 is not available.

-ResolutionIntervalSeconds<UInt32>

Specifies the frequency for resolving the relay name. The 6to4 relay name resolution interval setting has no effect if there is no 6to4 connectivity available on the host.

-State<State>

Specifies the state behavior of 6to4.
The acceptable values for this parameter are:
-- Default: If the host has link-local only IPv6 connectivity and a public IPv4 address, then 6to4 is enabled. If there is no global IPv6 address present and no global IPv4 address present, then the host does not have a 6to4 interface. If there is no global IPv6 address present but there is a global IPv4 address present, then the host has a 6to4 interface.
-- Enabled: If there is a global IPv4 address present, then the host has a 6to4 interface. If there is no global IPv4 address present, then the host does not have a 6to4 interface.
-- Disabled: 6to4 is turned off and connectivity with 6to4 is not available.

-ThrottleLimit<Int32>

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

-Confirm

Prompts you for confirmation before running the cmdlet.

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

<CommonParameters>

This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see    about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

• None

  This cmdlet accepts no input objects.

Outputs

The output type is the type of the objects that the cmdlet emits.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_Net6to4Configuration

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
  When the Passthru parameter is specified, this cmdlet outputs a modified 6to4 configuration object.

Examples

Example 1: Modify the relay name on the persistent store

This command sets the relay name to my6to4relay.com for 6to4 connectivity on the local persistent store.

PS C:\> Set-Net6to4Configuration -RelayName "my6to4relay.com"

Related topics

Get-Net6to4Configuration

Reset-Net6to4Configuration