Set-NetDnsTransitionConfiguration
Set-NetDnsTransitionConfiguration
Sets the DNS64 configuration on a computer.
구문
Parameter Set: ByName
Set-NetDnsTransitionConfiguration [-AcceptInterface <String[]> ] [-Adapter <CimInstance> ] [-AlwaysSynthesize <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ExclusionList <String[]> ] [-LatencyMilliseconds <UInt32> ] [-OnlySendAQuery <Boolean> ] [-PassThru] [-PrefixMapping <String[]> ] [-SendInterface <String[]> ] [-State <State> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Set-NetDnsTransitionConfiguration -InputObject <CimInstance[]> [-AcceptInterface <String[]> ] [-AlwaysSynthesize <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ExclusionList <String[]> ] [-LatencyMilliseconds <UInt32> ] [-OnlySendAQuery <Boolean> ] [-PassThru] [-PrefixMapping <String[]> ] [-SendInterface <String[]> ] [-State <State> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-NetDnsTransitionConfiguration sets the DNS64 configuration on a computer.
매개 변수
-AcceptInterface<String[]>
Specifies the interface on which the DNS64 is listening to all of the interfaces classified in the domain profile.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Adapter<CimInstance>
Specifies the network adapter on which to set.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-AlwaysSynthesize<Boolean>
Specifies that the DNS64 will always send both the response to the AAAA query as well as the synthesized A query response. If this parameter is set to False, then the DNS64 will send neither the response to the AAAA query nor the synthesized A query response.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ExclusionList<String[]>
Sets the list of IPv6 address ranges to be excluded from synthesis by the DNS64. The format is a comma-separated list of IPv6 addresses ranges.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InputObject<CimInstance[]>
Specifies the DNS64 configuration object on which to set.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-LatencyMilliseconds<UInt32>
Sets the delay in milliseconds between the AAAA and A query that the DNS64 sends.
별칭 |
Latency |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-OnlySendAQuery<Boolean>
Specifies that only A queries should be sent or both A and AAAA queries should be sent. If this parameter is set to True, then only A queries should be sent. If this parameter is set to False, then both A and AAAA queries should be sent.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PrefixMapping<String[]>
Sets to the list of IPv6 address ranges to be used for synthesis by the DNS64. The format is a comma-separated list of <IPv6 prefix,IPv4 subnet>. Such as "69:FF9B::/96,0.0.0.0/0","66:FF9B::/96,192.2.0.0/8"
.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SendInterface<String[]>
Sets the interface on which the DNS64 sends DNS queries.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-State<State>
Sets the enabled state of the DNS64 configuration.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetDnsTransitionConfiguration
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
EXAMPLE 1
This example sets the state to enabled and latency to 400 ms for the DNS64 configuration.
PS C:\> Set-NetDnsTransitionConfiguration –State Enabled –Latencymilliseconds 400
관련 항목
Disable-NetDnsTransitionConfiguration
Enable-NetDnsTransitionConfiguration
Get-NetDnsTransitionConfiguration