Get-DnsServerStatistics

업데이트 날짜: 2015년 5월

Get-DnsServerStatistics

Retrieves DNS server statistics or statistics for zones.

구문

Parameter Set: ServerStatistics
Get-DnsServerStatistics [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: ZoneStatistics
Get-DnsServerStatistics -ZoneName <String[]> [-CimSession <CimSession[]> ] [-Clear] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]




자세한 설명

The Get-DnsServerStatistics cmdlet retrieves statistics of a Domain Name System (DNS) server. If the ZoneName parameter is specified, this cmdlet gets statistics for the zones specified by that parameter. If the ZoneName parameter is not specified, the cmdlet gets aggregated server level statistics.

If the Clear parameter is specified along with the ZoneName parameter, the statistics for the specified zone will also be cleared.

매개 변수

-CimSession<CimSession[]>

원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.


별칭

Session

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-Clear

Indicates that the cmdlet clears statistics for the zones that you specify in the ZoneName parameter.


별칭

none

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-ComputerName<String>

Specifies a DNS server. 이 매개 변수에 허용되는 값은 다음과 같습니다. an IP V4 address; an IP V6 address; any other value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.


별칭

Cn

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-InformationAction<System.Management.Automation.ActionPreference>

별칭

infa

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-InformationVariable<System.String>

별칭

iv

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0 을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.


별칭

none

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-ZoneName<String[]>

Specifies an array of names of DNS zones for which to get DNS statistics. This parameter is mandatory for the ZoneStatistics parameter set.


별칭

none

필수 여부

true

위치

named

기본값

none

파이프라인 입력 허용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(http://go.microsoft.com/fwlink/p/?LinkID=113216)

<WorkflowParameters>

입력

입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.



  • class DNS_statistic

    {

    string DnsServerName; // Indicates the FQDN or IP address of a DNS Server.

    string CollectionName;

    uint32 CollectionId; // Numeric representation of CollectionName. string Name; /

    uint32 Value;

    string StringValue;

    };


출력

출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.

  • DNSServer01.Infrastructure.CimInstance#DnsServerStatistics





    CacheStatistics contains: FailedFreePasses, PassesRequiringAggressiveFree, PassesWithNoFrees, and SuccessfulFreePasses.

    DatabaseStatistics contains: NodeInUse, NodeMemory, NodeReturn, and NodeUsed.

    DnssecStatistics contains: FailedValidations, RecursionFailures, and SuccessfulValidations.

    DsStatistics contains: DsNodesAdded, DsNodesDeleted, DsNodesLoaded, DsNodesModified, DsNodesTombstoned, DsRecordsAdded, DsRecordsLoaded, DsRecordsReplaced, DsSerialWrites, DsTombstonesRead, DsTotalNodesRead, DsTotalRecordsRead, DsUpdateNodesRead, DsUpdateRecordsRead, DsUpdateSearches, DsWriteSuppressed, DsWriteType, FailedDeleteDsEntries, FailedLdapAdd, FailedLdapModify, FailedReadRecords, LdapReconnects, LdapSearchTime, LdapTimedWrites, LdapWriteAverage, LdapWriteBucket0, LdapWriteBucket1, LdapWriteBucket2, LdapWriteBucket3, LdapWriteBucket4, LdapWriteBucket5, LdapWriteMax, LdapWriteTimeTotal, PollingPassesWithDsErrors, UpdateAdmin, UpdateAgingOff, UpdateAgingOn, UpdateAginRefresh, UpdateAutoConfig, UpdateLists, UpdateNodes, UpdatePacket, UpdateRecordChange, UpdateScavenge, UpdatePacketPrecon, UpdateSuppressed, UpdateTombstones, and UpdateWrites.

    ErrorStatistics contains: BadKey, BadSig, BadTime, FormError, Max, NoError, NotAuthoritative, NotImpl, NotZone, NxDomain, NxRRSet, Refused, ServFail, UnknownError, YxDomain, and YxRRSet.

    MasterStatistics contains: AxfrLimit, AxfrRequest, AxfrSuccess, Failure, FormError, IxfrAxfr, IxfrNoVersion, IxfrRequest, IxfrTcpRequest, IxfrTcpSuccess, IxfrUdpForceAxfr, IxfrUdpForceTcp, IxfrUdpRequest, IxfrUdpSuccess, IxfrUpdateSuccess, NameError, NotifySent, Refused, RefuseLoading, RefuseNotAuth, RefuseReadOnly, RefuseSecurity, RefuseServerFailure, RefuseShutdown, RefuseZoneLocked, Request, and StubAxfrRequest.

    MemoryStatistics contains: Alloc, Free, Memory, MemTags, StdBlockAlloc, StdBlockFreeList, StdBlockFreeListMemory, StdBlockInUse, StdBlockMemory, StdBlockReturn, StdBlockUsed, StdInUse, StdMemory, StdReturn, StdToHeapAlloc, StdToHeapFree, StdToHeapMemory, and StdUsed.

    NetBiosStatistics contains: NbstatAlloc, NbstatFree, NbstatInFreeList, NbstatInUse, NbstatMemory, NbstatNetAllocs, NbstatReturn, NbstatUsed, and PSComputerName.

    PacketStatistics contains: PacketsForNsListInUse, PacketsForNsListReturned, PacketsForNsListUsed, RecursePacketReturn, RecursePacketUsed, TcpAlloc, TcpFree, cpMemory, TcpNetAllocs, UdpAlloc, UdpFree, UdpInFreeList, UdpInUse, UdpMemory, UdpNetAllocs, UdpQueryReturn, UdpResponseReturn, UdpReturn, and UdpUsed.

    PrivateStatistics contains: SecBigTimeSkewBypass, TcpConnect, TcpDisconnect, TcpQuery, UdpConnResetRetryOverflow, UdpConnResets, UdpErrorMessageSize, UdpGQCSConnReset, UdpGQCSFailure, UdpGQCSFailureWithContext, UdpIndicateRecvFailures, UdpRecvFailure, UdpRestartRecvOnSockets, UdpSocketPnpDelete, ZoneLoadInit, and PSComputerName.

    Query2Statistics contains: Notify, Standard, TKeyNego, TotalQueries, TypeA, TypeAll, TypeAxfr, TypeIxfr, TypeMx, TypeNs, TypeOther, TypePtr, TypeSoa, TypeSrv, and Update.

    QueryStatistics contains: TcpClientConnections, TcpQueries, TcpQueriesSent, TcpResponses, TcpResponsesReceived, UdpQueries, UdpQueriesSent, UdpResponses, and UdpResponsesReceived.

    RecordStatistics contains: CacheCurrent, CacheTimeouts, CacheTotal, InUse, Memory, Return, SlowFreeFinished, SlowFreeQueued, and Used.

    RecursionStatistics contains: AdditionalRecursed, CacheLockingDiscards, CacheUpdateAlloc, CacheUpdateFailure, CacheUpdateFree, CacheUpdateResponse, CacheUpdateRetry, ContinueCurrentLookup, ContinueCurrentRecursion, ContinueNextLookup, DiscardedDuplicateQueries, DuplicateCoalesedQueries, FailureReachAuthority, FailureReachPreviousResponse, FinalTimeoutExpired, FinalTimeoutQueued, Forwards, GnzLocalQuery, GnzRemoteQuery, GnzRemoteResponse, GnzRemoteResponseCacheFailure, GnzRemoteResponseCacheSuccess, LookupPasses, OriginalQuestionRecursed, PartialFailure, QueriesRecursed, RecursePassFailure, RecursionFailure, ReferalPasses, ResponseAnswer, ResponseAuthoritative, ResponseBadPacket, ResponseDelegation, ResponseEmpty, ResponseFromForwarder, ResponseNameError, ResponseNonZoneData, ResponseNotAuthoritative, ResponseRCode, Responses, ResponsesMismatched, ResponsesUnmatched, ResponseUnsecure, ResumeSuspendedQuery, Retries, RootNsQuery, RootNsResponse, SendResponseDirect, Sends, ServerFailure, SuspendedQuery, TcpConnect, TcpDisconnect, TcpQuery, TcpResponse, TcpTry, TimedoutQueries, and TotalQuestionsRecursed.

    SecondaryStatistics contains: AxfrInvalid, AxfrRefused, AxfrRequest, AxfrResponse, AxfrSuccess, IxfrTcpAxfr, IxfrTcpFormError, IxfrTcpInvalid, IxfrTcpRefused, IxfrTcpRequest, IxfrTcpResponse, IxfrTcpSuccess, IxfrUdpFormError, xfrUdpInvalid, IxfrUdpNewPrimary, IxfrUdpNoUpdate, IxfrUdpRefused, IxfrUdpRequest, IxfrUdpResponse, IxfrUdpSuccess, IxfrUdpUseAxfr, IxfrUdpUseTcp, IxfrUdpWrongServer, NotifyCurrentVersion, NotifyInvalid, NotifyMasterUnknown, NotifyNewVersion, NotifyNonPrimary, NotifyNoVersion, NotifyOldVersion, NotifyPrimary, NotifyReceived, SoaRequest, SoaResponse, SoaResponseInvalid, StubAxfrInvalid, StubAxfrRefused, StubAxfrRequest, StubAxfrResponse, and StubAxfrSuccess.

    SecurityStatistics contains: SecurityContextCreate, SecurityContextDequeue, SecurityContextFree, SecurityContextQueue, SecurityContextQueueInNego, SecurityContextQueueInNegoComplete, SecurityContextQueueLength, SecurityContextTimeout, SecurityPackAlloc, SecurityPackFree, SecurityTKeyBadTime, SecurityTKeyInvalid, SecurityTSigBadKey, SecurityTSigEcho, SecurityTSigFormError, SecurityTSigVerifyFailed, and SecurityTSigVerifySuccess.

    TimeoutStatistics contains: ActiveRecord, AlreadyInSystem, ArrayBlocksCreated, ArrayBlocksDeleted, CanNotDelete, Checks, DelayedFreesExecuted, DelayedFreesExecutedWithFunction, DelayedFreesQueued, DelayedFreesQueuedWithFunction, Deleted, RecentAccess, SetDirect, SetFromChildDelete, SetFromDereference, and SetTotal.

    TimeStatistics contains: LastClearTime, ServerStartTime, TimeElapsedSinceLastClearedStatistics, TimeElapsedSinceLastClearedStatisticsBetweenRestart, TimeElapsedSinceServerStart, and TimeElapsedSinceServerStartBetweenRestart.

    UpdateStatistics contains: Completed, DsSuccess, DsWriteFailure, Empty, FormError, ForwardInQueue, ForwardResponses, Forwards, ForwardTimeouts, InQueue, NoOps, NotAuthoritative, NotImplemented, NotZone, NxDomain, NxRRset, Queued, Received, Refused, RefusedAccessDenied, RefusedNonSecure, Rejected, SecureDsWriteFailure, SecureFailure, SecureSuccess, TcpForwards, Timeout, UpdateType, YxDomain, and YxRRset.

    WinsStatistics contains: WinsLookups, WinsResponses, WinsReverseLookups, and WinsReverseResponses.


  • DNSServer01.Infrastructure.CimInstance#DnsServerStatistics



    This cmdlet outputs this object for the ZoneStatistics parameter set. This object contains the following properties:

    Name: Name of the zone.

    StatsCollectionStartTime contains the time at which the zone statistics collection started.

    ZoneQueryStatistics contains: QueriesFailure, QueriesResponded, QueriesNameError. and QueriesReceived.
    Query information is provided for the following resource record types: A, AAAA, PTR, CNAME, MX, AFSDB, ATMA, DHCID, DNAME, HINFO, ISDN, MG (Mail Group), MB (Mail Box), MINFO (Mail Box Information), NAPTR (Naming Authority Pointer), NXT (Next Domain), KEY (Public Key), MR (Renamed Mailbox), RP (Responsible Person), RT (Route Through), SRV (Service Location), SIG (Signature), TXT (Text), WKS (Well Known Services), X.25, DNSKEY, DS, NS, and SOA. The information for other records is collected under the record type OTHER. The statistics for the record type ANY are collected under the record type ALL.

    ZoneTransferStatistics contains: SuccessSent, ResponseReceived, RequestSent, RequestReceived, SuccessReceived, and TransferType: IXFR or AXR.

    ZoneUpdateStatistics contains: DynamicUpdateReceived and DynamicUpdateRejected.


Example 1: Get server statistics for a the local DNS server

This command gets server statistics for the local DNS server.


PS C:\> Get-DnsServerStatistics

Example 2: Get server statistics for a specific zone

This command gets the statistics for the DNS zone named contoso.com.


PS C:\> Get-DnsServerStatistics -ZoneName "contoso.com"

Example 3: Clear statistics for a specific zone

This command gets the current zone statistics and resets the statistics counter for the DNS zone named contoso.com.


PS C:\> Get-DnsServerStatistics -ZoneName "contoso.com" -Clear

관련 항목

커뮤니티 추가 항목

추가
표시: