Get-DnsServerResourceRecord
업데이트 날짜: 2015년 5월
Get-DnsServerResourceRecord
Gets resource records from a specified DNS zone.
구문
Parameter Set: Name
Get-DnsServerResourceRecord [-ZoneName] <System.String> [[-Name] <System.String> ] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <System.String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-Node] [-RRType <System.String> {HInfo | Afsdb | Atma | Isdn | Key | Mb | Md | Mf | Mg | MInfo | Mr | Mx | NsNxt | Rp | Rt | Wks | X25 | A | AAAA | CName | Ptr | Srv | Txt | Wins | WinsR | Ns | Soa | NasP | NasPtr | DName | Gpos | Loc | DhcId | Naptr | RRSig | DnsKey | DS | NSec | NSec3 | NSec3Param | Tlsa} ] [-ThrottleLimit <System.Int32> ] [-ZoneScope <System.String> ] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: Unknown
Get-DnsServerResourceRecord [-ZoneName] <System.String> [[-Name] <System.String> ] [-Type] <System.UInt16> [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <System.String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-Node] [-ThrottleLimit <System.Int32> ] [-ZoneScope <System.String> ] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Get-DnsServerResourceRecord cmdlet gets the following information for a specified resource record from a Domain Name System (DNS) zone:
-- HostName
-- RecordType
-- RecordClass
-- TimeToLive
-- Timestamp
-- RecordData
매개 변수
-CimSession<Microsoft.Management.Infrastructure.CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<System.String>
Specifies a DNS server. If you do not specify this parameter, the command runs on the local system. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
별칭 |
Cn,ForwardLookupPrimaryServer |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Name<System.String>
Specifies a node name within the selected zone. If not specified, it defaults to the root (@) node.
별칭 |
none |
필수 여부 |
false |
위치 |
3 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Node
Indicates that the command returns only the resource records at the root of the node specified by the Name parameter. If Node is not specified then both the root and any child records in the node are returned.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RRType<System.String>
Specifies the type of resource record.
이 매개 변수에 허용되는 값은 다음과 같습니다.
-- HInfo
-- Afsdb
-- Atma
-- Isdn
-- Key
-- Mb
-- Md
-- Mf
-- Mg
-- MInfo
-- Mr
-- Mx
-- NsNxt
-- Rp
-- Rt
-- Wks
-- X25
-- A
-- AAAA
-- CName
-- Ptr
-- Srv
-- Txt
-- Wins
-- WinsR
-- Ns
-- Soa
-- NasP
-- NasPtr
-- DName
-- Gpos
-- Loc
-- DhcId
-- Naptr
-- RRSig
-- DnsKey
-- DS
-- NSec
-- NSec3
-- NSec3Param
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<System.Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Type<System.UInt16>
Specifies a type of record to get.
별칭 |
none |
필수 여부 |
true |
위치 |
4 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ZoneName<System.String>
Specifies the name of a DNS server zone.
별칭 |
ForwardLookupZone |
필수 여부 |
true |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ZoneScope<System.String>
Specifies the name of a zone scope.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
예
Example 1: Get all resource records in a specified zone
This command gets all DNS server resource records in a zone named contoso.com.
PS C:\> Get-DnsServerResourceRecord -ZoneName "contoso.com"
Example 2: Get all resource records in a zone for a specified node
This command gets all DNS server resource records in a zone named contoso.com from the node named Admin01.
PS C:\> Get-DnsServerResourceRecord -ZoneName "contoso.com" -Name "Admin01"
Example 3: Get all resource records in a zone by specified host name
This command gets all DNS server resource records in a zone named contoso.com that have the name Host02. The command is similar to the one in example 2, but in this case the command uses a host name instead of a node name.
PS C:\> Get-DnsServerResourceRecord -ZoneName "contoso.com" -Name "Host02"
Example 4: Get all A records in a zone by specified host and specified type
This command gets all A records in a zone named contoso.com that have the name Host03.
PS C:\> Get-DnsServerResourceRecord -ZoneName "contoso.com" -Name "Host03" -RRType "A"
Example 5: Get all A records in a specified zone
This command gets all A records in a zone named contoso.com.
PS C:\> Get-DnsServerResourceRecord -ZoneName "contoso.com" -RRType "A"
Example 6: Get all NS records at the root of a specified zone
This command gets all NS records at the root of a zone named contoso.com.
PS C:\> Get-DnsServerResourceRecord -ZoneName "contoso.com" -RRType "NS" -Node