Set-DnsServerDsSetting

Set-DnsServerDsSetting

Modifies DNS Active Directory settings.

구문

Parameter Set: Set1
Set-DnsServerDsSetting [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-DirectoryPartitionAutoEnlistInterval <TimeSpan> ] [-LazyUpdateInterval <UInt32> ] [-MinimumBackgroundLoadThreads <UInt32> ] [-PassThru] [-PollingInterval <UInt32> ] [-RemoteReplicationDelay <UInt32> ] [-ThrottleLimit <Int32> ] [-TombstoneInterval <TimeSpan> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-DnsServerDsSetting cmdlet modifies Domain Name System (DNS) Active Directory settings.

Note: If any of the set operations fails, the Set-DnsServerDsSetting cmdlet must not terminate. It must continue to set other operations and display the modified settings.

매개 변수

-AsJob

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-ComputerName<String>

Specifies a DNS server. 이 매개 변수에 허용되는 값은 다음과 같습니다. an IPv4 address; an IPv6 address; and any other value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.

-DirectoryPartitionAutoEnlistInterval<TimeSpan>

Specifies the interval, during which a DNS server tries to enlist itself in a DNS domain partition and DNS forest partition, if it is not already enlisted. We recommend that you limit this value to the range one hour to 180 days, inclusive, but you can use any value. We recommend that you set the default value to one day. You must set the value 0 (zero) as a flag value for the default value. However, you can allow zero and treat it literally.

-LazyUpdateInterval<UInt32>

Specifies a value, in seconds, to determine how frequently the DNS server submits updates to the directory server without specifying the LDAP_SERVER_LAZY_COMMIT_OID control ([MS-ADTS] section 3.1.1.3.4.1.7) at the same time that it processes DNS dynamic update requests. We recommend that you limit this value to the range 0x00000000 to 0x0000003c. You must set the default value to 0x00000003. You must set the value zero to indicate that the DNS server does not specify the LDAP_SERVER_LAZY_COMMIT_OID control at the same time that it processes DNS dynamic update requests. For more information about LDAP_SERVER_LAZY_COMMIT_OID, see LDAP_SERVER_LAZY_COMMIT_OID control code.

The LDAP_SERVER_LAZY_COMMIT_OID control instructs the DNS server to return the results of a directory service modification command after it is completed in memory but before it is committed to disk. In this way, the server can return results quickly and save data to disk without sacrificing performance.

The DNS server must send this control only to the directory server that is attached to an LDAP update that the DNS server initiates in response to a DNS dynamic update request.

If the value is nonzero, LDAP updates that occur during the processing of DNS dynamic update requests must not specify the LDAP_SERVER_LAZY_COMMIT_OID control if a period of less than DsLazyUpdateInterval seconds has passed since the last LDAP update that specifies this control. If a period that is greater than DsLazyUpdateInterval seconds passes, during which time the DNS server does not perform an LDAP update that specifies this control, the DNS server must specify this control on the next update.

-MinimumBackgroundLoadThreads<UInt32>

Specifies the minimum number of background threads that the DNS server uses to load zone data from the directory service. You must limit this value to the range 0x00000000 to 0x00000005, inclusive. You must set the default value to 0x00000001, and you must treat the value zero as a flag value for the default value.

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-PollingInterval<UInt32>

Specifies how frequently the DNS server polls Active Directory Domain Services (AD DS) for changes in Active Directory–integrated zones. You must limit the value to the range 30 seconds to 3,600 seconds, inclusive.

-RemoteReplicationDelay<UInt32>

Specifies the minimum interval, in seconds, that the DNS server waits between the time that it determines that a single object has changed on a remote directory server, to the time that it tries to replicate a single object change. You must limit the value to the range 0x00000005 to 0x00000E10, inclusive. You must set the default value to 0x0000001E, and you must treat the value zero as a flag value for the default value.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

-TombstoneInterval<TimeSpan>

Specifies the amount of time that DNS keeps tombstoned records alive in Active Directory. We recommend that you limit this value to the range three days to eight weeks, inclusive, but you can set it to any value in the range 82 hours to 8 weeks. We recommend that you set the default value to 14 days and treat the value zero as a flag value for the default. However, you can allow the value zero and treat it literally.

At 2:00 A.M. local time every day, the DNS server must search all directory service zones for nodes that have the Active Directory dnsTombstoned attribute set to True, and for a directory service EntombedTime (section 2.2.2.2.3.23 of MS-DNSP) value that is greater than previous directory service DSTombstoneInterval seconds. You must permanently delete all such nodes from the directory server.

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

-

Class dnsServerDSSettings  
  
{  
  
ulong dsPollingInterval; //Interval, in seconds, to poll the directory service–integrated zones.  
  
ulong dsTombstoneInterval; // Time of tombstoned records in directory service–integrated zones, expressed in seconds.  
  
ulong adsLazyUpdateInterval;  
  
ulong dsMinimumBackgroundLoadThreads;  
  
ulong dsRemoteReplicationDelay;  
  
ulong dsDirectoryPartitionAutoEnlistInterval;  
  
boolean DefaultDirectoryPartitions  
  
}  

  

  

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#DnsServerDsSetting

예제

Example 1: Set an auto-enlist interval for a directory partition

This command sets an auto-enlist interval to 15 days for a directory partition.

PS C:\> Set-DnsServerDsSetting -DirectoryPartitionAutoEnlistInterval 15.00:00:00 -PassThru

관련 항목

Get-DnsServerDsSetting

DNS Server Integer Properties

[MS-DNSP]: Domain Name Service (DNS) Server Management Protocol Specification