Add-DnsServerPrimaryZone

업데이트 날짜: 2015년 5월

Add-DnsServerPrimaryZone

Adds a primary zone to a DNS server.

구문

Parameter Set: ADForwardLookupZone
Add-DnsServerPrimaryZone [-Name] <String> [-ReplicationScope] <String> {Forest | Domain | Legacy | Custom} [[-DirectoryPartitionName] <String> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-DynamicUpdate <String> {None | Secure | NonsecureAndSecure} ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-LoadExisting] [-PassThru] [-ResponsiblePerson <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: ADReverseLookupZone
Add-DnsServerPrimaryZone [-ReplicationScope] <String> {Forest | Domain | Legacy | Custom} [[-DirectoryPartitionName] <String> ] -NetworkId <String> [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-DynamicUpdate <String> {None | Secure | NonsecureAndSecure} ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-LoadExisting] [-PassThru] [-ResponsiblePerson <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: FileForwardLookupZone
Add-DnsServerPrimaryZone [-Name] <String> -ZoneFile <String> [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-DynamicUpdate <String> {None | Secure | NonsecureAndSecure} ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-LoadExisting] [-PassThru] [-ResponsiblePerson <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: FileReverseLookupZone
Add-DnsServerPrimaryZone -NetworkId <String> -ZoneFile <String> [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-DynamicUpdate <String> {None | Secure | NonsecureAndSecure} ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-LoadExisting] [-PassThru] [-ResponsiblePerson <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

자세한 설명

The Add-DnsServerPrimaryZone cmdlet adds a specified primary zone on a Domain Name System (DNS) server.

You can add an Active Directory-integrated forward lookup zone, an Active Directory-integrated reverse lookup zone, a file-backed forward lookup zone, or a file-backed reverse lookup zone.

매개 변수

-CimSession<CimSession[]>

원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.

-ComputerName<String>

Specifies a DNS server. If you do not specify this parameter, the command runs on the local system. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.

-DirectoryPartitionName<String>

Specifies a directory partition on which to store the zone. Use this parameter when the ReplicationScope parameter has a value of Custom.

-DynamicUpdate<String>

Specifies how a zone accepts dynamic updates. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- None
-- Secure
-- NonsecureAndSecure

Secure DNS updates are available only for Active Directory-integrated zones.

-InformationAction<System.Management.Automation.ActionPreference>

Specifies how this cmdlet responds to an information event. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- SilentlyContinue
-- Stop
-- Continue
-- Inquire
-- Ignore
-- Suspend

-InformationVariable<System.String>

Specifies a variable in which to store an information event message.

-LoadExisting

Indicates that the server loads an existing file for the zone. Otherwise, the cmdlet creates default zone records automatically. This switch is relevant only for file-backed zones.

-Name<String>

Specifies a name for the zone the cmdlet creates.

-NetworkId<String>

Specifies a network ID and prefix length for a reverse lookup zone. Use the format A.B.C.D/prefix for IPv4 or 1111:2222:3333:4444::/prefix for IPv6.

For IPv4, the cmdlet creates only class A, B, C, or D reverse lookup zones. If you specify a prefix that is between classes, the cmdlet uses the longer prefix that is divisible by 8. For example, a value of 10.2.10.0/23 adds the 10.2.10.0/24 reverse lookup zone, and the 10.2.11.0/24 reverse lookup zone is not created. If you enter an IPv4 prefix longer than /24, the cmdlet creates a /32 reverse lookup zone.

For IPv6, the cmdlet creates ip6.arpa zones for prefixes from /16 to /128 that are divisible by 4. If you specify a prefix that is between values, the cmdlet uses the longer prefix that is divisible by 4. For example, entering a value of AAAA::/58 adds the AAAA::/60 ip6.arpa zone. If you do not enter a prefix, the cmdlet uses a default prefix value of /128.

-PassThru

작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-ReplicationScope<String>

Specifies a partition on which to store an Active Directory-integrated zone. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Custom. Any custom directory partition that a user creates. Specify a custom directory partition by using the DirectoryPartitionName parameter.
-- Domain. The domain directory partition.
-- Forest. The ForestDnsZone directory partition.
-- Legacy. A legacy directory partition.

-ResponsiblePerson<String>

Specifies a person responsible for the zone.

-ThrottleLimit<Int32>

Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0 을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.

-ZoneFile<String>

Specifies a name of the zone file. This parameter is only relevant for file-backed DNS.

-Confirm

cmdlet을 실행하기 전에 확인 메시지를 표시합니다.

-WhatIf

cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)

<WorkflowParameters>

입력

입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.

출력

출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.

• Microsoft.Management.Infrastructure.CimInstance#DnsServerPrimaryZone

예

Example 1: Create a primary zone

This command creates an Active Directory-integrated forward lookup zone called west01.contoso.com with Forest-wide replication scope.

PS C:\> Add-DnsServerPrimaryZone -Name "west01.contoso.com" -ReplicationScope "Forest" -PassThru 

Example 2: Create a file-backed primary zone

This command creates a file-backed primary forward lookup zone called west02.contoso.com with the specified DNS file.

PS C:\> Add-DnsServerPrimaryZone -Name "west02.contoso.com" -ZoneFile "west02.contoso.com.dns"

Example 3: Create a reverse lookup zone

This command creates the Active Directory-integrated class C reverse lookup zone 0.1.10.in-addr.arpa with Forest-wide replication scope.

PS C:\> Add-DnsServerPrimaryZone -NetworkID "10.1.0.0/24" -ReplicationScope "Forest" 

Example 4: Create a file-backed reverse lookup zone

This command creates the file-backed reverse lookup zone 0.3.10.in-addr.arpa.

PS C:\> Add-DnsServerPrimaryZone -NetworkID 10.3.0.0/24 -ZoneFile "0.3.10.in-addr.arpa.dns" 

관련 항목

ConvertTo-DnsServerPrimaryZone

Restore-DnsServerPrimaryZone

Set-DnsServerPrimaryZone