Set-DnsServerScavenging
업데이트 날짜: 2015년 5월
Set-DnsServerScavenging
Changes DNS server scavenging settings.
구문
Parameter Set: Set1
Set-DnsServerScavenging [[-ScavengingState] <Boolean> ] [[-RefreshInterval] <TimeSpan> ] [[-NoRefreshInterval] <TimeSpan> ] [[-ScavengingInterval] <TimeSpan> ] [-ApplyOnAllZones] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Set-DnsServerScavenging cmdlet changes scavenging settings on a Domain Name System (DNS) server. If any of the set operations fail, the cmdlet continues to configure other settings. The cmdlet displays the settings that it changed and the settings that it did not change.
매개 변수
-ApplyOnAllZones
Indicates that the server settings apply on all zones.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies a remote DNS server. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NoRefreshInterval<TimeSpan>
Specifies a length of time as a TimeSpan object. NoRefreshInterval sets a period of time in which no refreshes are accepted for dynamically updated records. Zones on the server inherit this value automatically.
This value is the interval between the last update of a timestamp for a record and the earliest time when the timestamp can be refreshed. The minimum value is 0. The maximum value is 8760 hours (seven days).
별칭 |
none |
필수 여부 |
false |
위치 |
4 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RefreshInterval<TimeSpan>
Specifies the refresh interval as a TimeSpan object. During this interval, a DNS server can refresh a resource record that has a non-zero time stamp. Zones on the server inherit this value automatically.
If a DNS server does not refresh a resource record that has a non-zero time stamp, the DNS server can remove that record during the next scavenging.
Do not select a value smaller than the longest refresh period of a resource record registered in the zone.
The minimum value is 0. The maximum value is 8760 hours (seven days). The default value is the same as the DefaultRefreshInterval property of the zone DNS server.
별칭 |
none |
필수 여부 |
false |
위치 |
3 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ScavengingInterval<TimeSpan>
Specifies a length of time as a TimeSpan object. ScavengingInterval determines whether the scavenging feature for the DNS server is enabled and sets the number of hours between scavenging cycles.
The default setting is 0, which disables scavenging for the DNS server. A setting greater than 0 enables scavenging for the server and sets the number of days, hours, minutes, and seconds (formatted as dd.hh:mm:ss) between scavenging cycles. The minimum value is 0. The maximum value is 365.00:00:00 (1 year).
별칭 |
none |
필수 여부 |
false |
위치 |
5 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ScavengingState<Boolean>
Specifies whether to Enable automatic scavenging of stale records. ScavengingState determines whether the DNS scavenging feature is enabled by default on newly created zones. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- $False. Disables scavenging. This is the default setting.
-- $True. Enables scavenging
별칭 |
none |
필수 여부 |
false |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
예
Example 1: Change the refresh interval for a resource record
This command changes the refresh interval to 1 day for scavenging on a local DNS server.
PS C:\> Set-DnsServerScavenging -RefreshInterval 1.00:00:00 -Verbose -PassThru