Set-DnsServerConditionalForwarderZone
Set-DnsServerConditionalForwarderZone
Changes settings for a DNS conditional forwarder.
구문
Parameter Set: Parameters
Set-DnsServerConditionalForwarderZone [-Name] <String> [[-MasterServers] <IPAddress[]> ] [[-ForwarderTimeout] <UInt32> ] [[-UseRecursion] <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ADZone
Set-DnsServerConditionalForwarderZone [-Name] <String> -ReplicationScope <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-DirectoryPartitionName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-DnsServerConditionalForwarderZone cmdlet changes settings of an existing conditional forwarder on a Domain Name System (DNS) server. You can change the master servers, forwarder time-out, recursion, recursion scope, and directory partition name for a conditional forwarder zone.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies a DNS server to host the forwarder. If you do not specify this parameter, the command runs on the local system. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DirectoryPartitionName<String>
Specifies a directory partition on which to store the forwarder. Conditional forwarders are internally stored as zones. Use this parameter when the ReplicationScope parameter has a value of Custom.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ForwarderTimeout<UInt32>
Specifies a length of time, in seconds, that a DNS server waits for the forwarder to resolve a query. After the DNS server tries all forwarders, it can attempt to resolve the query itself. The minimum value is 0. The maximum value is 15.
별칭 |
없음 |
필수 여부 |
false |
위치 |
4 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-MasterServers<IPAddress[]>
Specifies an array of IP addresses of the master servers of the zone. Conditional forwarders are stored as zones. You can use both IPv4 and IPv6 addresses. Specify at least one master server.
별칭 |
없음 |
필수 여부 |
false |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies the name of a zone that has conditional forwarding configured.
별칭 |
ZoneName |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ReplicationScope<String>
Specifies the replication scope for the conditional forwarder. Conditional forwarders are stored internally as zones. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Custom. Replicate the conditional forwarder to all DNS servers running on domain controllers enlisted in a custom directory partition.
-- Domain. Replicate the conditional forwarder to all DNS servers that run on domain controllers in the domain.
-- Forest. Replicate the conditional forwarder to all DNS servers that run on domain controllers in the forest.
-- Legacy. Replicate the conditional forwarder to all domain controllers in the domain.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-UseRecursion<Boolean>
Specifies whether a DNS server attempts to resolve a query after the forwarder fails to resolve it. A value of $False prevents a DNS server from attempting resolution using other DNS servers. This parameter overrides the Use Recursion setting for a DNS server.
별칭 |
없음 |
필수 여부 |
false |
위치 |
5 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Change forwarder time-out for a zone
This command changes the forwarder time-out for a forwarder zone named contoso.com.
PS C:\> Set-DnsServerConditionalForwarderZone -Name "contoso.com" -ForwarderTimeout 15
Example 2: Change replication scope for a zone
This command changes the replication scope of contoso.com to a value of Domain, which means all DNS servers in the domain. This example uses the PassThru parameter to create output.
PS C:\> Set-DnsServerConditionalForwarderZone -Name "contoso.com" -ReplicationScope "Domain" -PassThru