Add-DnsServerStubZone

Add-DnsServerStubZone

Adds a DNS stub zone.

구문

Parameter Set: FileForwardLookupZone
Add-DnsServerStubZone [-Name] <String> [-MasterServers] <IPAddress[]> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-LoadExisting] [-PassThru] [-ThrottleLimit <Int32> ] [-ZoneFile <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ADForwardLookupZone
Add-DnsServerStubZone [-Name] <String> [-MasterServers] <IPAddress[]> [-ReplicationScope] <String> [[-DirectoryPartitionName] <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-LoadExisting] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ADReverseLookupZone
Add-DnsServerStubZone [-MasterServers] <IPAddress[]> [-ReplicationScope] <String> [[-DirectoryPartitionName] <String> ] -NetworkId <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-LoadExisting] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: FileReverseLookupZone
Add-DnsServerStubZone [-MasterServers] <IPAddress[]> -NetworkId <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-LoadExisting] [-PassThru] [-ThrottleLimit <Int32> ] [-ZoneFile <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Add-DnsServerStubZone cmdlet adds a stub zone. A stub zone is a copy of a Domain Name System (DNS) zone that contains only resource records that identify the DNS servers for that zone.

You can add either a forward lookup zone or a reverse lookup zone. You can add either an Active Directory-integrated zone or a file-backed zone.

매개 변수

-AsJob

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-ComputerName<String>

Specifies a DNS server. If you do not specify this parameter, the command runs on the local system. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.

-DirectoryPartitionName<String>

Specifies a directory partition on which to store the zone. Use this parameter when the ReplicationScope parameter has a value of Custom.

-LoadExisting

Loads an existing file for the zone. Otherwise, the cmdlet creates default zone records automatically. This switch is relevant only for file-backed zones.

-MasterServers<IPAddress[]>

Specifies an array of IP addresses of the master servers of the zone. You can use both IPv4 and IPv6.

-Name<String>

Specifies a name of a zone.

-NetworkId<String>

Specifies a network ID and prefix length for a reverse lookup zone. Use the format A.B.C.D/prefix for IPv4 or 1111:2222:3333:4444::/prefix for IPv6.

For IPv4, the cmdlet creates only class A, B, C, or D reverse lookup zones. If you specify a prefix that is between classes, the cmdlet uses the longer prefix that is divisible by 8. For example, a value of 10.2.10.0/23 adds the 10.2.10.0/24 reverse lookup zone, and the 10.2.11.0/24 reverse lookup zone is not created. If you enter an IPv4 prefix longer than /24, the cmdlet creates a /32 reverse lookup zone.

For IPv6, the cmdlet creates ip6.arpa zones for prefixes from /16 to /128 that are divisible by 4. If you specify a prefix that is between values, the cmdlet uses the longer prefix that is divisible by 4. For example, entering a value of AAAA::/58 adds the AAAA::/60 ip6.arpa zone. If you do not enter a prefix, the cmdlet uses a default prefix value of /128.

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-ReplicationScope<String>

Specifies a partition on which to store an Active Directory-integrated zone. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Custom. Any custom directory partition that a user creates. Specify a custom directory partition by using the DirectoryPartitionName parameter.
-- Domain. The domain directory partition.
-- Forest. The ForestDnsZone directory partition.
-- Legacy. A legacy directory partition.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

-ZoneFile<String>

Specifies a name of the zone file. This parameter is only relevant for file-backed DNS.

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#DnsServerStubZone

예제

Example 1: Add a file-backed stub zone

This command adds west02.contoso.com as a file-backed stub zone. The command specifies a master server and uses the PassThru parameter to produce output.

PS C:\> Add-DnsServerStubZone -Name "west02.contoso.com" -MasterServers "172.23.90.124" -PassThru -ZoneFile "west02_contoso.dns"

Example 2: Add an Active Directory-integerated stub zone

This command adds west03.contoso.com as a stub zone replicated to all DNS servers in the forest.

PS C:\> Add-DnsServerStubZone -Name "west03.contoso.com" -MasterServers 172.23.90.124 -PassThru -ReplicationScope "Forest"

Example 3: Add an Active Directory-integrated reverse lookup zone

This command adds a stub zone for the network 2.1.10.in-addr.arpa, which is replicated to all DNS servers in the forest.

PS C:\> Add-DnsServerStubZone -NetworkId 10.1.2.0/24 -MasterServers 172.23.90.124 -PassThru -ReplicationScope Forest

관련 항목

Set-DnsServerStubZone