Set-DnsServerGlobalNameZone

Set-DnsServerGlobalNameZone

Changes configuration settings for a GlobalNames zone.

구문

Parameter Set: Set1
Set-DnsServerGlobalNameZone [-AlwaysQueryServer <Boolean> ] [-AsJob] [-BlockUpdates <Boolean> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Enable <Boolean> ] [-EnableEDnsProbes <Boolean> ] [-GlobalOverLocal <Boolean> ] [-PassThru] [-PreferAaaa <Boolean> ] [-SendTimeout <UInt32> ] [-ServerQueryInterval <TimeSpan> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-DnsServerGlobalNameZone cmdlet enables or disables single-label Domain Name System (DNS) queries. It also changes configuration settings for a GlobalNames zone.

The GlobalNames zone supports short, easy-to-use names instead of fully qualified domain names (FQDNs) without using Windows Internet Name Service (WINS) technology. For instance, DNS can query SarahJonesDesktop instead of SarahJonesDesktop.contoso.com.

매개 변수

-AlwaysQueryServer<Boolean>

Specifies whether a DNS server attempts to use cache values to update a list of DNS servers. This value has no effect if the DNS server hosts a GlobalNames zone.

If the value is $True, a DNS server queries a remote DNS server for an update to the list of remote DNS servers that are hosting a GlobalNames zone.

If the value is $False, a DNS server attempts to use cached local service records for a GlobalNames zone to get an update to the list.

The default value is $False.

-AsJob

-BlockUpdates<Boolean>

Specifies whether a DNS server blocks updates in authoritative zones for FQDNs that conflict with labels in a GlobalNames zone. If the value is $True, a DNS server checks for a conflict and blocks an update when it finds a conflict. If the value is $False, the server does not check. The default value is $True.

To check for conflicts, the DNS server removes the zone name (rightmost labels) and performs a search that is not case sensitive on its locally hosted GlobalNames zone.

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-ComputerName<String>

Specifies a DNS server. If you do not specify this parameter, the command runs on the local system. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.

-Enable<Boolean>

Specifies whether to use a GlobalNames zone to resolve single-label names. A value of $True enables the use of GlobalNames. A value of $False disables the use of GlobalNames.

-EnableEDnsProbes<Boolean>

Specifies whether a DNS server honors the EnableEDnsProbes value for a remote GlobalNames zone. A DNS server can allow or refuse queries on Extended DNS (EDNS) information.

If this value is $True, the server attempts EDNS queries for remote GlobalNames zones if the zones permit.

If this value is $False, a DNS server does not attempt ENDS queries for remote GlobalNames zones.

The default value is $False.

-GlobalOverLocal<Boolean>

Specifies whether a DNS server first attempts to resolve names through a query of zones for which it is authoritative. If the value is $True, a DNS server queries locally and then queries the GlobalNames zone. If the value is $False, the server queries the GlobalNames zone and then queries globally. The default value is $False.

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-PreferAaaa<Boolean>

Specifies whether a DNS server prefers IPv6 (AAAA) address records over IPv4 (A) address records for queries to a remote DNS server that hosts a GlobalNames zone.

If this value is $True, a DNS server uses IPv6 addresses, unless no IPv6 value is available.

If this value is $False, a DNS server uses IPv4 addresses, unless no IPv4 value is available.

The default value is $False.

-SendTimeout<UInt32>

Specifies the number of seconds that a DNS server waits for a response to a query to a remote GlobalNames zone.

The minimum value is 1. The maximum value is 15.

The default value is 3. A DNS server interprets a value of 0 as the default value, 3.

-ServerQueryInterval<TimeSpan>

Specifies an interval, as a time-span object, between queries to refresh the set of remote DNS servers that are hosting the GlobalNames zone.

The minimum value is 60 seconds. The maximum value is 30 days.

The default value is six hours. A DNS server interprets a value of 0 as the default value, six hours.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#DnsServerGlobalNameZone

예제

Example 1: Enable a GlobalNames zone

This command enables a GlobalNames zone on the current server.

PS C:\> Set-DnsServerGlobalNameZone -Enable $true -PassThru