Set-DnsServerStubZone
업데이트 날짜: 2015년 5월
Set-DnsServerStubZone
Changes settings for a DNS server stub zone.
구문
Parameter Set: Parameter
Set-DnsServerStubZone [-Name] <String> [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-LocalMasters <IPAddress[]> ] [-MasterServers <IPAddress[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: ADZone
Set-DnsServerStubZone [-Name] <String> -ReplicationScope <String> {Forest | Domain | Legacy | Custom} [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-DirectoryPartitionName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Set-DnsServerStubZone cmdlet changes settings for an existing stub zone. A stub zone is a copy of a Domain Name System (DNS) zone that contains only resource records that identify the authoritative DNS servers for that zone.
The stub zone can be a forward lookup zone or a reverse lookup zone. The stub zone can be an Active Directory-integrated zone or a file-backed zone.
매개 변수
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies a DNS server. If you do not specify this parameter, the command runs on the local system. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), Hostname, or NETBIOS name.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DirectoryPartitionName<String>
Specifies a directory partition on which to store the zone. Use this parameter when the ReplicationScope parameter has a value of Custom.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-LocalMasters<IPAddress[]>
Specifies a list of IP addresses of a zone's primary DNS servers used locally by this DNS server only. If not configured, the MasterServers value is used; otherwise, this list is used in place of the MasterServers value. This value is ignored if the zone type is not stub.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-MasterServers<IPAddress[]>
Specifies a list of IP addresses of primary DNS servers for a zone. This value must be non-empty for any zone of a type that requires primary DNS servers: secondary, stub, or forwarder.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies the name of a zone. The cmdlet modifies settings for this zone.
별칭 |
ZoneName |
필수 여부 |
true |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ReplicationScope<String>
Specifies a partition on which to store an Active Directory-integrated zone. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Custom. Any custom directory partition that a user creates. Specify a custom directory partition by using the DirectoryPartitionName parameter.
-- Domain. The domain directory partition.
-- Forest. The ForestDnsZone directory partition.
-- Legacy. A legacy directory partition.
별칭 |
none |
필수 여부 |
true |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
예
Example 1: Change master servers for a stub zone
This command changes the master servers for a stub zone named west03.contoso.com.
PS C:\> Set-DnsServerStubZone -Name "west03.contoso.com" -MasterServers 172.23.90.124,2001:4898:7020:f100:458f:e6a2:fcaf:698c
Example 2: Change replication scope for a stub zone
This command changes the replication scope for a stub zone named west04.contoso.com to all DNS servers in the domain.
PS C:\> Set-DnsServerStubZone -Name "west04.contoso.com" -ReplicationScope "Domain" -PassThru