Add-DnsServerDirectoryPartition
Add-DnsServerDirectoryPartition
Creates a DNS application directory partition.
구문
Parameter Set: Name
Add-DnsServerDirectoryPartition [-Name] <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: BuiltIn
Add-DnsServerDirectoryPartition -Type <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Add-DnsServerDirectoryPartition cmdlet creates a Domain Name System (DNS) application directory partition. After you install a DNS server, DNS creates an application directory partition for the service at the forest and domain levels. This cmdlet creates additional DNS application directory partitions.
You can store Domain Name System (DNS) zones in the domain or application directory partitions of Active Directory Domain Services (AD DS). A partition is a data structure in AD DS that distinguishes data for different replication purposes. When you create an application directory partition for DNS, you can control the scope of replication for the zone that is stored in that partition.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies a remote DNS server. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies a name for the new DNS application directory partition.
별칭 |
DirectoryPartitionName |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Type<String>
Specifies a type of DNS application directory partition. Valid values are:
-- /Domain
-- /Forest
-- /AllDomains
To create a default domain-wide DNS application directory partition for the Active Directory domain where the specified DNS server is located, specify /Domain.
To create a default forest-wide DNS application directory partition for the Active Directory forest where the specified DNS server is located, specify /Forest.
The ComputerName parameter is ignored for an /AllDomains DNS application directory partition. The computer from where you run this command must be joined to a domain in the forest where you want to create all of the default domain-wide application directory partitions.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
-
Class dnsDirectoryPartition
{
boolean ApplicationDirectoryPartitions; //Specifies whether support for application directory partitions is enabled on the DNS Server.
string fqdn; // UTF-8 string that specifies the FQDN of the application directory partition.
string dpdn; // Unicode string that specifies the distinguished name for the application directory partition head object
string crDn; // Unicode string that specifies the distinguished name for the application directory partition crossRef object.
ulong flags; //application directory partition properties (see MS-DNSP for details)
ulong ZoneCount: //The number of zones from this application directory partition that are loaded in the DNS server's memory.
ulong state; //The current state of this application directory partition (see MS-DNSP for details)
ulong replicaCount; // The number of replication locations for the application directory partition
string replicaArray\[\]; //contains information about replication locations for this application directory partition
boolean DefaultDirectoryPartitions
string DirectoryPartition Scope
ComputerName servers\[\]; // servers enlisted in DNS Application Directory Partition
}
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Create a DNS application directory partition
This command adds a new DNS application directory partition named ADpart to the local computer.
PS C:\> Add-DnsServerDirectoryPartition -Name "ADpart"
관련 항목
Get-DnsServerDirectoryPartition
Register-DnsServerDirectoryPartition