Get-NetVirtualizationProviderRoute
Get-NetVirtualizationProviderRoute
Gets physical network routes for a virtualized network.
구문
Parameter Set: ByName
Get-NetVirtualizationProviderRoute [-AsJob] [-CimSession <CimSession[]> ] [-DestinationPrefix <String[]> ] [-InterfaceIndex <UInt32[]> ] [-Metric <UInt32[]> ] [-NextHop <String[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Get-NetVirtualizationProviderRoute cmdlet gets physical network routes for a virtual network. Network Virtualization allows more than one virtual network to exist on the same physical network. Computers can exchange network traffic with a virtual machine (VM) by using a Customer Address within the virtual network. Network Virtualization uses Provider Routes to direct network traffic on the physical network. For more information, see Network Virtualization technical details (https://technet.microsoft.com/library/jj134174.aspx) on TechNet.
You can specify Provider Routes by using any combination of the following:
-- Destination.
-- Interface.
-- Metric.
-- Next hop gateway.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DestinationPrefix<String[]>
Specifies an array of IP prefixes, as strings, for destination networks. You can specify IPv4 and IPv6 addresses. Use prefix notation: 0.0.0.0/0.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
true |
-InterfaceIndex<UInt32[]>
Specifies an array of indexes for network interfaces that have Network Virtualization enabled.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Metric<UInt32[]>
Specifies an array of integer values. Network Virtualization selects the route with the lowest metric value from a group of usable routes.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NextHop<String[]>
Specifies an array of IP addresses for next hop gateways.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
true |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Get provider routes for a specified interface
This command gets the provider routes for the interface that has the interface index 21.
PS C:\> Get-NetVirtualizationProviderRoute -InterfaceIndex 21
Example 2: Get provider routes for destination prefix
This command gets the provider routes that have the specified destination prefix.
PS C:\> Get-NetVirtualizationProviderRoute -DestinationPrefix "172.16.0.0/16"
관련 항목
New-NetVirtualizationProviderRoute