Get-NetVirtualizationLookupRecord
Get-NetVirtualizationLookupRecord
Gets policy entries for VMs in a virtual network.
구문
Parameter Set: ByName
Get-NetVirtualizationLookupRecord [-AsJob] [-CimSession <CimSession[]> ] [-Context <String[]> ] [-CustomerAddress <String[]> ] [-CustomerID <String[]> ] [-MACAddress <String[]> ] [-ProviderAddress <String[]> ] [-Rule <RuleType[]> ] [-ThrottleLimit <Int32> ] [-Type <Type[]> ] [-Unsynchronized <Boolean[]> ] [-Unusable <Boolean[]> ] [-UseVmMACAddress <Boolean[]> ] [-VirtualSubnetID <UInt32[]> ] [-VMName <String[]> ] [ <CommonParameters>]
자세한 설명
The Get-NetVirtualizationLookupRecord cmdlet gets lookup record policy entries for IP addresses that belong to a virtual network. Network Virtualization allows more than one virtual network to exist on the same physical network. Computers can exchange network traffic with a virtual machine (VM) by using a Customer Address within the virtual network. Network Virtualization manages the Provider Addresses that are the physical network addresses. This cmdlet gets records that map a Customer Address to a Provider Address. For more information, see Network Virtualization technical details (https://technet.microsoft.com/library/jj134174.aspx) on TechNet.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Context<String[]>
Specifies an array of comments regarding policy entries.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CustomerAddress<String[]>
Specifies an array of IP addresses within the virtual network. You can use both IPv4 and IPv6 addresses.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CustomerID<String[]>
Specifies an array of IDs for policy entries or VMs.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-MACAddress<String[]>
Specifies an array of media access control (MAC) addresses that corresponds to the Customer Addresses.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ProviderAddress<String[]>
Specifies an array of IP addresses, either IPv4 or IPv6, for physical addresses that corresponds to the Customer Addresses.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Rule<RuleType[]>
Specifies an array of virtualization mechanisms that policy entries use. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- TranslationMethodNat. IP address rewrite.
-- TranslationMethodEncap. Network Virtualization Generic Routing Encapsulation (NVGRE).
-- TranslationMethodNone. None.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Type<Type[]>
Specifies an array of types. The type determines the address mapping for a record.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Unsynchronized<Boolean[]>
Specifies an array of Boolean values that indicates whether this record is not synchronized with the central policy controller. This is a read-only property of the lookup record that provides diagnostic information.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Unusable<Boolean[]>
Specifies an array of Boolean values that indicates whether this record is unusable for data communication. This is a read-only property of the lookup record that provides diagnostic information.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-UseVmMACAddress<Boolean[]>
Specifies an array of Boolean values that indicate whether an entry uses its defined MAC address instead of physical MAC address.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-VirtualSubnetID<UInt32[]>
Specifies an array of IDs for the virtual subnet that the Customer address belongs to. 이 매개 변수에 허용되는 값은 다음과 같습니다.integers from 4096 through 16777214.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-VMName<String[]>
Specifies an array of names for the VM for a policy entry.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Get all policy entries for a host
This command gets all the policy entries for the current host.
PS C:\> Get-NetVirtualizationLookupRecord
Example 2: Get policy entries for a specified virtual subnet
This command gets all policy entries that belong to the virtual subnet that has the ID 50002.
PS C:\> Get-NetVirtualizationLookupRecord -VirtualSubnetID 50002
Example 3: Get policy entries for a physical IP address
This command gets all the policy entries that contain the specified provider address.
PS C:\> Get-NetVirtualizationLookupRecord -ProviderAddress "192.168.3.24"
관련 항목
New-NetVirtualizationLookupRecord