Create or modify a Group Call Pickup number range in Skype for Business 2015

Skype for Business Server 2015
 

마지막으로 수정된 항목: 2015-08-17

Create or modify a 그룹 호출 받기 number range in 비즈니스용 Skype 서버 Enterprise Voice.

그룹 호출 받기 is based on the 통화 대기 응용 프로그램. When you deploy 그룹 호출 받기, you must configure the call park orbit table with ranges of phone numbers that are designated as call pickup group numbers. These group numbers are the numbers that users dial to pick up calls that are ringing for another user.

Like call park orbit numbers, call pickup group numbers need to be virtual extensions that have no user or phone assigned to them. Each 프런트 엔드 풀 where you deploy 그룹 호출 받기 can have one or more ranges of call pickup group numbers. The group number ranges must be globally unique in your deployment, and must be assigned as the GroupPickup type.

Use the following procedure to create or modify a call pickup group number range in the call park orbit table.

note참고:
You must use 비즈니스용 Skype 서버 관리 쉘 to create, modify, remove, and view Group Call Pickup number ranges in the call park orbit table. Group Call Pickup number ranges are not available in 비즈니스용 Skype 서버 제어판.

The call pickup group number ranges must comply with the following rules:

  • The beginning number of the range must be less than or equal to the ending number of the range.

  • The value of the beginning number of the range must be the same length as the ending number of the range.

  • The number range must be unique. This range cannot overlap with any other range.

  • If the number range begins with the character * or #, the range must be greater than 100.

  • Valid values: Must match the regular expression string ([\*|#]?[1-9]\d{0,7})|([1-9]\d{0,8}). This means the value must be a string beginning with either the character * or # or a number 1 through 9 (the first character cannot be a zero). If the first character is * or #, the following character must be a number 1 through 9 (it cannot be a zero). Subsequent characters can be any number 0 through 9 up to seven additional characters (for example, "#6000", "*92000", "*95551212", and "915551212"). If the first character is not * or #, the first character must be a number 1 through 9 (it cannot be zero), followed by up to eight characters, each a number 0 through 9 (for example, "915551212", "41212", "300").

  1. 비즈니스용 Skype 서버 관리 쉘이 RTCUniversalServerAdmins 그룹의 구성원 또는 Lync Server 2013에서 설치 권한 위임에 설명된 필요한 사용자 권한을 사용하여 설치된 컴퓨터에 로그온합니다.

  2. 비즈니스용 Skype 서버 관리 셸 시작: 시작, 모든 프로그램, 비즈니스용 Skype 서버 2015를 차례로 클릭한 다음 비즈니스용 Skype 서버 관리 셸을 클릭합니다.

  3. Use New-CsCallParkOrbit to create a new range of call pickup group numbers. Use Set-CsCallParkOrbit to modify an existing range of call pickup numbers.

    At the command line, run:

    New-CsCallParkOrbit -Identity <name of call pickup group range> -NumberRangeStart <first number in range> -NumberRangeEnd <last number in range> -CallParkService <FQDN or service ID of the Application service that hosts the Call Park application> -Type GroupPickup
    

    For example:

    New-CsCallParkOrbit -Identity "Redmond call pickup" -NumberRangeStart 100 -NumberRangeEnd 199 -CallParkService redmond-applicationserver-1 -Type GroupPickup
    

    The following example shows how to change a range of numbers from call park orbits to call pickup groups.

    Set-CsCallParkOrbit -Identity "Redmond call pickup" -Type GroupPickup
    
    important중요:
    Use this cmdlet to change the type assigned to number ranges only if you initially specified the incorrect type and the group range is not yet in use. If you change the number range from CallPark to GroupPickup or vice versa and the number range is already in use, either Call Park or Group Call Pickup will stop working for that number range. For example, if you change a number range from CallPark to GroupPick, the 통화 대기 응용 프로그램 can no longer use that range of orbits to park calls.
 
표시: