Edit Edge Settings Expander for Lync Server 2010

 

마지막으로 수정된 항목: 2012-11-14

You edit the settings for the 에지 서버 or 에지 풀 by configuring the following properties:

General

  • Internal pool FQDN: The internal pool fully qualified domain name is the identity of the 에지 서버 or 에지 풀 as defined in the domain name system (DNS) host (A or AAAA for IPv6) record.

  • Select Enable federation for this Edge pool (port 5061) if you want to enable the 에지 서버 or 에지 풀 for federation with other session initiation protocol partners.

    important중요:
    You can only define one 에지 서버 or 에지 풀 actively for federation. The configuration shown in the associated screen shot indicates that another 에지 서버 or 에지 풀 is already configured for federation. The external DNS SRV record for federation (_sipfederationtls._tcp.<external domain name>) will point to the 에지 서버 or 에지 풀 for federation.
  • The Internal Configuration Replication Port (HTTPS), by default at TCP port 4443, is the port that the local (that is, local to the 에지 서버) copy of the 중앙 관리 저장소 is replicated over. The local copy of the 중앙 관리 저장소 is in the RTCLOCAL database in the SQL Server on each computer. The replication is one-way, initiated from the 중앙 관리 서버 (or, the 프런트 엔드 서버 or 프런트 엔드 풀 that holds the 중앙 관리 서버 role) to the 에지 서버 and is an internal interface port.

Next hop selection

  • Select for the list your Next hop pool. You define either a 디렉터, 디렉터 풀, 프런트 엔드 서버 or 프런트 엔드 풀 to assume this role. The next hop pool is the server or server pool that will accept inbound SIP messages from the 에지 서버 or 에지 풀 internal interface and send outbound SIP to the Edge internal interface.

    note참고:
    The 디렉터 is an optional role and if you decide not to deploy 디렉터, the 프런트 엔드 서버 (single computer or pool) will assume the 디렉터 role.

External settings

This section of the properties allows you to edit properties for the external settings of the 에지 서버 or 에지 풀. The following properties are available to edit:

  • Select the Enable separate FQDN and IP address for web conferencing and A/V check box if you want to assign distinct IP addresses and fully qualified domain names to each 에지 서버 service.

    note참고:
    If you choose to not select the check box, you must use separate ports for each Edge service. Each Edge service will share the FQDN defined for the 액세스 에지 서비스, and will therefore use the same IP address. Each Edge service must be uniquely identified by either a distinct IP address and same port, or the same IP address and unique port values.
  • Select A/V Edge service is NAT enabled if you want to configure the A/V 에지 서비스 to use a private address or other address that will be hidden behind a network address translation (NAT) device.

  • To edit the Access Edge service, you define the Pool FQDN for the 액세스 에지 서비스 as defined in DNS by host (A, and AAAA if IPv6 is used) records and a port value

  • To edit the Web Conferencing Edge service, you define a Pool FQDN for the 웹 회의 에지 서비스 as defined in DNS by host (A, and AAAA if IPv6 is used) records and a port value

  • To edit the A/V Edge service, you define a Pool FQDN for the A/V 에지 서비스 as defined in DNS by host (A, and AAAA if IPv6 is used) records and a port value

    important중요:
    If you have selected the Enable separate FQDN and IP address for web conferencing and A/V check box, only the 액세스 에지 서비스 Pool FQDN will be available for editing. Assign distinct ports for each of the three Edge services.

OK Accepts and commits changes to the dialog.

Cancel Discards changes and closes the dialog.

Help Displays this help screen.

 
표시: