Mediation Server General Settings Expander for Lync Server 2010

 

마지막으로 수정된 항목: 2012-09-29

You edit the properties of the 중재 서버 in this dialog. Along the left side is a set of quick links to take you to settings for General settings, Next hop settings, and PSTN gateway settings. In each section are the following settings:

General:

  • FQDN: You edit the fully qualified domain name of the 중재 서버

  • Associations: Select the Associate Edge pool (for media components) check box and select an 에지 서버 or 에지 풀 for the 중재 서버 to use as the media path for external access.

Next hop:

  • Next hop selection: Select from a list the 프런트 엔드 서버 or 프런트 엔드 풀 to use as the path for the 중재 서버 to use for communicating with your deployment.

PSTN gateway:

Mediation Server PSTN gateway:

  • Listening ports: Define the ports that the 중재 서버 will listen on. You can define a port for TLS or transport layer security, or TCP, or transport control protocol. For the port entry for TCP to be available, you must select the check box for Enable TCP port.

    important중요:
    Refer to the documentation and configuration settings for your public switched telephone network (PSTN) gateway to determine if you need to enable and define port values TLS, TCP or both. TLS is a more secure protocol, using certificates to encrypt the traffic between the 중재 서버 and the PSTN gateway. Not all PSTN gateways support TLS.
  • A listing of SIP trunks and the gateways that are defined and configured for your deployment is listed. If no entries are present, there are no SIP trunks or PSTN gateways configured for your deployment. You define and configure trunks and gateways under Shared Components in 토폴로지 작성기.

Lync Server 2010에 대한 일반 설정 확장기
 
표시: