아티클
09/27/2010

방법: 아티클 정의(RMO 프로그래밍)

RMO(복제 관리 개체)를 사용하여 프로그래밍 방식으로 아티클을 정의할 수 있습니다. 아티클을 정의하는 데 사용하는 RMO 클래스는 정의되는 아티클의 게시 유형에 따라 달라집니다.

스냅숏 또는 트랜잭션 게시에 대한 아티클을 정의하려면

ServerConnection 클래스를 사용하여 게시자 연결을 만듭니다.
TransArticle 클래스의 인스턴스를 만들고 ConnectionContext 속성(ReplicationObject에서 상속)을 1단계에서 만든 ServerConnection 인스턴스로 설정한 후 다음 속성을 설정합니다.
- Name에 대한 아티클의 이름
- PublicationName에 대한 게시의 이름
- DatabaseName에 대한 게시 데이터베이스의 이름
- (옵션) 아티클에 정적 행 필터가 있으면 FilterClause 속성에 대해 필터 절을 지정합니다.
Create 메서드를 호출합니다.
(옵션) 아티클에 열 필터가 있으면 다음을 수행합니다.
- RemoveReplicatedColumns 메서드를 호출하여 아티클에서 열을 제거합니다. 제거할 열 이름의 String 배열을 전달합니다. null 값을 전달하면 모든 열이 제거됩니다.
- AddReplicatedColumns 메서드를 호출하여 아티클에 열을 추가합니다. 추가할 열 이름의 String 배열을 전달합니다. null 값을 전달하면 모든 열이 추가됩니다.

병합 게시에 대한 아티클을 정의하려면

ServerConnection 클래스를 사용하여 게시자 연결을 만듭니다.
TransArticle 클래스의 인스턴스를 만들고, ConnectionContext()()()() 속성(ReplicationObject에서 상속)을 1단계에서 만든 ServerConnection 인스턴스로 설정한 후 다음 속성을 설정합니다.
- Name에 대한 아티클의 이름
- PublicationName에 대한 게시의 이름
- DatabaseName에 대한 게시 데이터베이스의 이름
- (옵션) 아티클이 행 필터링된 경우 FilterClause 속성에 대해 행 필터 절을 지정합니다. 이 속성을 사용하여 정적 또는 매개 변수가 있는 행 필터를 지정합니다. 자세한 내용은 매개 변수가 있는 행 필터를 참조하십시오.
Create 메서드를 호출합니다.
(옵션) 아티클이 열 필터링되었으면 다음을 수행합니다.
- RemoveReplicatedColumns 메서드를 호출하여 아티클에서 열을 제거합니다. 제거할 열 이름의 String 배열을 전달합니다. null 값을 전달하면 모든 열이 제거됩니다.
- AddReplicatedColumns 메서드를 호출하여 아티클에 열을 추가합니다. 추가할 열 이름의 String 배열을 전달합니다. null 값을 전달하면 모든 열이 추가됩니다.
(옵션) 아티클을 다른 아티클에 정의된 행 필터에 따라 필터링해야 하면 MergeJoinFilter 클래스의 인스턴스를 만들어서 두 아티클 간의 조인 필터를 정의합니다. 그런 후 다음 속성을 설정합니다.
- JoinArticleName 속성에 대해 필터링할 자식 아티클(2단계)의 이름
- ArticleName 속성에 대해 이 아티클을 조인할 필터링된 기존 아티클의 이름
- FilterName 속성에 대한 조인 필터의 이름
- JoinFilterClause 속성에 대해 조인을 정의하는 식
- FilterTypes 속성에 대한 JoinFilter 값
자세한 내용은 조인 필터를 참조하십시오.
(옵션) 2단계에서 필터링된 아티클을 나타내는 개체에 대해 AddMergeJoinFilter 메서드를 호출합니다. 5단계의 MergeJoinFilter 개체를 전달하여 조인 필터를 만듭니다.

예

다음 예에서는 행 및 열 필터가 포함된 아티클을 트랜잭션 게시에 추가합니다.

          // Define the Publisher, publication, and article names.
            string publisherName = publisherInstance;
            string publicationName = "AdvWorksProductTran";
            string publicationDbName = "AdventureWorks";
            string articleName = "Product";
            string schemaOwner = "Production";

            TransArticle article;

            // Create a connection to the Publisher.
            ServerConnection conn = new ServerConnection(publisherName);

            // Create a filtered transactional articles in the following steps:
            // 1) Create the  article with a horizontal filter clause.
            // 2) Add columns to or remove columns from the article.
            try
            {
                // Connect to the Publisher.
                conn.Connect();

                // Define a horizontally filtered, log-based table article.
                article = new TransArticle();
                article.ConnectionContext = conn;
                article.Name = articleName;
                article.DatabaseName = publicationDbName;
                article.SourceObjectName = articleName;
                article.SourceObjectOwner = schemaOwner;
                article.PublicationName = publicationName;
                article.Type = ArticleOptions.LogBased;
                article.FilterClause = "DiscontinuedDate IS NULL";

                // Ensure that we create the schema owner at the Subscriber.
                article.SchemaOption |= CreationScriptOptions.Schema;

                if (!article.IsExistingObject)
                {
                    // Create the article.
                    article.Create();
                }
                else
                {
                    throw new ApplicationException(String.Format(
                        "The article {0} already exists in publication {1}.",
                        articleName, publicationName));
                }

                // Create an array of column names to remove from the article.
                String[] columns = new String[1];
                columns[0] = "DaysToManufacture";

                // Remove the column from the article.
                article.RemoveReplicatedColumns(columns);
            }
            catch (Exception ex)
            {
                // Implement appropriate error handling here.
                throw new ApplicationException("The article could not be created.", ex);
            }
            finally
            {
                conn.Disconnect();
            }

' Define the Publisher, publication, and article names.
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksProductTran"
Dim publicationDbName As String = "AdventureWorks"
Dim articleName As String = "Product"
Dim schemaOwner As String = "Production"

Dim article As TransArticle

' Create a connection to the Publisher.
Dim conn As ServerConnection = New ServerConnection(publisherName)

' Create a filtered transactional articles in the following steps:
' 1) Create the  article with a horizontal filter clause.
' 2) Add columns to or remove columns from the article.
Try
    ' Connect to the Publisher.
    conn.Connect()

    ' Define a horizontally filtered, log-based table article.
    article = New TransArticle()
    article.ConnectionContext = conn
    article.Name = articleName
    article.DatabaseName = publicationDbName
    article.SourceObjectName = articleName
    article.SourceObjectOwner = schemaOwner
    article.PublicationName = publicationName
    article.Type = ArticleOptions.LogBased
    article.FilterClause = "DiscontinuedDate IS NULL"

    ' Ensure that we create the schema owner at the Subscriber.
    article.SchemaOption = article.SchemaOption Or _
    CreationScriptOptions.Schema

    If Not article.IsExistingObject Then
        ' Create the article.
        article.Create()
    Else
        Throw New ApplicationException(String.Format( _
         "The article {0} already exists in publication {1}.", _
         articleName, publicationName))
    End If

    ' Create an array of column names to remove from the article.
    Dim columns() As String = New String(0) {}
    columns(0) = "DaysToManufacture"

    ' Remove the column from the article.
    article.RemoveReplicatedColumns(columns)
Catch ex As Exception
    ' Implement appropriate error handling here.
    Throw New ApplicationException("The article could not be created.", ex)
Finally
    conn.Disconnect()
End Try

다음 예에서는 병합 게시에 세 개의 아티클을 추가합니다. 이 아티클에는 열 필터가 포함되며, 두 개의 조인 필터를 사용하여 매개 변수가 있는 행 필터를 다른 아티클에 전파합니다.

         // Define the Publisher and publication names.
            string publisherName = publisherInstance;
            string publicationName = "AdvWorksSalesOrdersMerge";
            string publicationDbName = "AdventureWorks";

            // Specify article names.
            string articleName1 = "Employee";
            string articleName2 = "SalesOrderHeader";
            string articleName3 = "SalesOrderDetail";

            // Specify join filter information.
            string filterName12 = "SalesOrderHeader_Employee";
            string filterClause12 = "Employee.EmployeeID = " +
                "SalesOrderHeader.SalesPersonID";
            string filterName23 = "SalesOrderDetail_SalesOrderHeader";
            string filterClause23 = "SalesOrderHeader.SalesOrderID = " +
                "SalesOrderDetail.SalesOrderID";

            string salesSchema = "Sales";
            string hrSchema = "HumanResources";

            MergeArticle article1 = new MergeArticle();
            MergeArticle article2 = new MergeArticle();
            MergeArticle article3 = new MergeArticle();
            MergeJoinFilter filter12 = new MergeJoinFilter();
            MergeJoinFilter filter23 = new MergeJoinFilter();

            // Create a connection to the Publisher.
            ServerConnection conn = new ServerConnection(publisherName);

            // Create three merge articles that are horizontally partitioned
            // using a parameterized row filter on Employee.EmployeeID, which is 
            // extended to the two other articles using join filters. 
            try
            {
                // Connect to the Publisher.
                conn.Connect();

                // Create each article. 
                // For clarity, each article is defined separately. 
                // In practice, iterative structures and arrays should 
                // be used to efficiently create multiple articles.

                // Set the required properties for the Employee article.
                article1.ConnectionContext = conn;
                article1.Name = articleName1;
                article1.DatabaseName = publicationDbName;
                article1.SourceObjectName = articleName1;
                article1.SourceObjectOwner = hrSchema;
                article1.PublicationName = publicationName;
                article1.Type = ArticleOptions.TableBased;

                // Define the parameterized filter clause based on Hostname.
                article1.FilterClause = "Employee.LoginID = HOST_NAME()";

                // Set the required properties for the SalesOrderHeader article.
                article2.ConnectionContext = conn;
                article2.Name = articleName2;
                article2.DatabaseName = publicationDbName;
                article2.SourceObjectName = articleName2;
                article2.SourceObjectOwner = salesSchema;
                article2.PublicationName = publicationName;
                article2.Type = ArticleOptions.TableBased;

                // Set the required properties for the SalesOrderDetail article.
                article3.ConnectionContext = conn;
                article3.Name = articleName3;
                article3.DatabaseName = publicationDbName;
                article3.SourceObjectName = articleName3;
                article3.SourceObjectOwner = salesSchema;
                article3.PublicationName = publicationName;
                article3.Type = ArticleOptions.TableBased;

                if (!article1.IsExistingObject) article1.Create();
                if (!article2.IsExistingObject) article2.Create();
                if (!article3.IsExistingObject) article3.Create();

                // Select published columns for SalesOrderHeader.
                // Create an array of column names to vertically filter out.
                // In this example, only one column is removed.
                String[] columns = new String[1];

                columns[0] = "CreditCardApprovalCode";

                // Remove the column.
                article2.RemoveReplicatedColumns(columns);

                // Define a merge filter clauses that filter 
                // SalesOrderHeader based on Employee and 
                // SalesOrderDetail based on SalesOrderHeader. 

                // Parent article.
                filter12.JoinArticleName = articleName1;
                // Child article.
                filter12.ArticleName = articleName2;
                filter12.FilterName = filterName12;
                filter12.JoinUniqueKey = true;
                filter12.FilterTypes = FilterTypes.JoinFilter;
                filter12.JoinFilterClause = filterClause12;

                // Add the join filter to the child article.
                article2.AddMergeJoinFilter(filter12);

                // Parent article.
                filter23.JoinArticleName = articleName2;
                // Child article.
                filter23.ArticleName = articleName3;
                filter23.FilterName = filterName23;
                filter23.JoinUniqueKey = true;
                filter23.FilterTypes = FilterTypes.JoinFilter;
                filter23.JoinFilterClause = filterClause23;

                // Add the join filter to the child article.
                article3.AddMergeJoinFilter(filter23);
            }
            catch (Exception ex)
            {
                // Do error handling here and rollback the transaction.
                throw new ApplicationException(
                    "The filtered articles could not be created", ex);
            }
            finally
            {
                conn.Disconnect();
            }

' Define the Publisher and publication names.
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim publicationDbName As String = "AdventureWorks"

' Specify article names.
Dim articleName1 As String = "Employee"
Dim articleName2 As String = "SalesOrderHeader"
Dim articleName3 As String = "SalesOrderDetail"

' Specify join filter information.
Dim filterName12 As String = "SalesOrderHeader_Employee"
Dim filterClause12 As String = "Employee.EmployeeID = " + _
    "SalesOrderHeader.SalesPersonID"
Dim filterName23 As String = "SalesOrderDetail_SalesOrderHeader"
Dim filterClause23 As String = "SalesOrderHeader.SalesOrderID = " + _
    "SalesOrderDetail.SalesOrderID"

Dim salesSchema As String = "Sales"
Dim hrSchema As String = "HumanResources"

Dim article1 As MergeArticle = New MergeArticle()
Dim article2 As MergeArticle = New MergeArticle()
Dim article3 As MergeArticle = New MergeArticle()
Dim filter12 As MergeJoinFilter = New MergeJoinFilter()
Dim filter23 As MergeJoinFilter = New MergeJoinFilter()

' Create a connection to the Publisher.
Dim conn As ServerConnection = New ServerConnection(publisherName)

' Create three merge articles that are horizontally partitioned
' using a parameterized row filter on Employee.EmployeeID, which is 
' extended to the two other articles using join filters. 
Try
    ' Connect to the Publisher.
    conn.Connect()

    ' Create each article. 
    ' For clarity, each article is defined separately. 
    ' In practice, iterative structures and arrays should 
    ' be used to efficiently create multiple articles.

    ' Set the required properties for the Employee article.
    article1.ConnectionContext = conn
    article1.Name = articleName1
    article1.DatabaseName = publicationDbName
    article1.SourceObjectName = articleName1
    article1.SourceObjectOwner = hrSchema
    article1.PublicationName = publicationName
    article1.Type = ArticleOptions.TableBased

    ' Define the parameterized filter clause based on Hostname.
    article1.FilterClause = "Employee.LoginID = HOST_NAME()"

    ' Set the required properties for the SalesOrderHeader article.
    article2.ConnectionContext = conn
    article2.Name = articleName2
    article2.DatabaseName = publicationDbName
    article2.SourceObjectName = articleName2
    article2.SourceObjectOwner = salesSchema
    article2.PublicationName = publicationName
    article2.Type = ArticleOptions.TableBased

    ' Set the required properties for the SalesOrderDetail article.
    article3.ConnectionContext = conn
    article3.Name = articleName3
    article3.DatabaseName = publicationDbName
    article3.SourceObjectName = articleName3
    article3.SourceObjectOwner = salesSchema
    article3.PublicationName = publicationName
    article3.Type = ArticleOptions.TableBased

    ' Create the articles, if they do not already exist.
    If article1.IsExistingObject = False Then
        article1.Create()
    End If
    If article2.IsExistingObject = False Then
        article2.Create()
    End If
    If article3.IsExistingObject = False Then
        article3.Create()
    End If

    ' Select published columns for SalesOrderHeader.
    ' Create an array of column names to vertically filter out.
    ' In this example, only one column is removed.
    Dim columns() As String = New String(0) {}

    columns(0) = "CreditCardApprovalCode"

    ' Remove the column.
    article2.RemoveReplicatedColumns(columns)

    ' Define a merge filter clauses that filter 
    ' SalesOrderHeader based on Employee and 
    ' SalesOrderDetail based on SalesOrderHeader. 

    ' Parent article.
    filter12.JoinArticleName = articleName1
    ' Child article.
    filter12.ArticleName = articleName2
    filter12.FilterName = filterName12
    filter12.JoinUniqueKey = True
    filter12.FilterTypes = FilterTypes.JoinFilter
    filter12.JoinFilterClause = filterClause12

    ' Add the join filter to the child article.
    article2.AddMergeJoinFilter(filter12)

    ' Parent article.
    filter23.JoinArticleName = articleName2
    ' Child article.
    filter23.ArticleName = articleName3
    filter23.FilterName = filterName23
    filter23.JoinUniqueKey = True
    filter23.FilterTypes = FilterTypes.JoinFilter
    filter23.JoinFilterClause = filterClause23

    ' Add the join filter to the child article.
    article3.AddMergeJoinFilter(filter23)

Catch ex As Exception
    ' Do error handling here and rollback the transaction.
    Throw New ApplicationException( _
        "The filtered articles could not be created", ex)
Finally
    conn.Disconnect()
End Try

참고 항목

태스크

방법: 게시 만들기(RMO 프로그래밍)

방법: 아티클 정의(복제 Transact-SQL 프로그래밍)

개념

게시된 데이터 필터링

데이터 및 데이터베이스 개체 게시

복제 관리 개체 개념

방법: 아티클 정의(RMO 프로그래밍)

스냅숏 또는 트랜잭션 게시에 대한 아티클을 정의하려면

병합 게시에 대한 아티클을 정의하려면

예

참고 항목

태스크

개념

추가 리소스