PipelineBuffer.DirectErrorRow 메서드

정의

PipelineBuffer 행을 IDTSOutput100 속성이 trueIsErrorOut으로 보냅니다.

오버로드

DirectErrorRow(Int32, Int32, Int32)

속성이 PipelineBuffer true인 행을 IDTSOutput100IsErrorOut 보냅니다.

DirectErrorRow(Int32, Int32, Int32, Int32)

속성이 PipelineBuffer true인 행을 IDTSOutput100IsErrorOut 보냅니다.

DirectErrorRow(Int32, Int32, Int32)

속성이 PipelineBuffer true인 행을 IDTSOutput100IsErrorOut 보냅니다.

public:
 void DirectErrorRow(int outputID, int errorCode, int errorColumn);
public void DirectErrorRow (int outputID, int errorCode, int errorColumn);
member this.DirectErrorRow : int * int * int -> unit
Public Sub DirectErrorRow (outputID As Integer, errorCode As Integer, errorColumn As Integer)

매개 변수

outputID
Int32

IDTSOutput100 행을 보낼 오류 PipelineBuffer의 ID입니다.

errorCode
Int32

행을 처리하는 동안 발생한 오류의 번호입니다.

errorColumn
Int32

오류의 원인이 된 PipelineBuffer 열의 ID입니다.

예제

다음 코드 예제에서는 메서드를 사용하여 DirectErrorRow 버퍼의 행을 동기 오류 출력으로 전송하는 방법을 보여 줍니다.

public override void ProcessInput(int inputID, PipelineBuffer buffer)  
{  
        IDTSInput100 input = ComponentMetaData.InputCollection.GetObjectByID(inputID);  

        /// This code sample assumes the component has 2 outputs, one the default,  
        /// the other the error output. If the errorOutputIndex returned from GetErrorOutputInfo  
        /// is 0, then the default output is the second output in the collection.  
        int defaultOutputID = -1;  
        int errorOutputID = -1;  
        int errorOutputIndex = -1;  

        GetErrorOutputInfo(ref errorOutputID,ref errorOutputIndex);  

        if (errorOutputIndex == 0)  
            defaultOutputID = ComponentMetaData.OutputCollection[1].ID;  
        else  
            defaultOutputID = ComponentMetaData.OutputCollection[0].ID;  

        while (buffer.NextRow())  
        {  
            try  
            {  
                /// TODO: Implement code to process the columns in the buffer row.  

                /// Ideally, your code should detect potential exceptions prior to them occurring, rather  
                /// than having a generic try/catch block such as this.   
                /// However, since the error or truncation implementation is specific to each component  
                /// this sample focuses on actually directing the row, and not a single error or truncation.  

                /// Unless an exception occurs, direct the row to the default   
                buffer.DirectRow(defaultOutputID);  
            }  
            catch  
            {  
                /// Yes. Has the user specified to redirect the row?  
                if (input.ErrorRowDisposition == DTSRowDisposition.RD_RedirectRow)  
                {  
                    /// Yes, direct the row to the error output.  
                    /// TODO: Add code to include the errorColumnID  
                    buffer.DirectErrorRow(errorOutputID, 0, errorColumnID);  
                }  
                else if (input.ErrorRowDisposition == DTSRowDisposition.RD_FailComponent || input.ErrorRowDisposition == DTSRowDisposition.RD_NotUsed)  
                {  
                    /// No, the user specified to fail the component, or the error row disposition was not set.  
                    throw new Exception("An error occurred, and the DTSRowDisposition is either not set, or is set to fail component.");  
                }  
                else  
                {  
                    /// No, the user specified to ignore the failure so   
                    /// direct the row to the default output.  
                    buffer.DirectRow(defaultOutputID);  
                }  

            }  
        }  
}  
Public  Overrides Sub ProcessInput(ByVal inputID As Integer, ByVal buffer As PipelineBuffer)   
   Dim input As IDTSInput100 = ComponentMetaData.InputCollection.GetObjectByID(inputID)   
   Dim defaultOutputID As Integer = -1   
   Dim errorOutputID As Integer = -1   
   Dim errorOutputIndex As Integer = -1   
   GetErrorOutputInfo(errorOutputID, errorOutputIndex)   
   If errorOutputIndex = 0 Then   
     defaultOutputID = ComponentMetaData.OutputCollection(1).ID   
   Else   
     defaultOutputID = ComponentMetaData.OutputCollection(0).ID   
   End If   
   While buffer.NextRow   
     Try   
       buffer.DirectRow(defaultOutputID)   
     Catch   
       If input.ErrorRowDisposition = DTSRowDisposition.RD_RedirectRow Then   
         buffer.DirectErrorRow(errorOutputID, 0, errorColumnID)   
       Else   
         If input.ErrorRowDisposition = DTSRowDisposition.RD_FailComponent OrElse input.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed Then   
           Throw New Exception("An error occurred, and the DTSRowDisposition is either not set, or is set to fail component.")   
         Else   
           buffer.DirectRow(defaultOutputID)   
         End If   
       End If   
     End Try   
   End While   
End Sub  

설명

이 메서드는 속성true이 설정된 개체가 있는 IDTSOutput100 데이터 흐름 구성 요소에서 IsErrorOut 사용됩니다. 버퍼 행을 처리하는 동안 오류가 발생하고 입력, 출력 또는 열에 지정된 경우 RD_RedirectRow 구성 요소에서 호출됩니다.

적용 대상

DirectErrorRow(Int32, Int32, Int32, Int32)

속성이 PipelineBuffer true인 행을 IDTSOutput100IsErrorOut 보냅니다.

public:
 void DirectErrorRow(int row, int outputID, int errorCode, int errorColumn);
public void DirectErrorRow (int row, int outputID, int errorCode, int errorColumn);
member this.DirectErrorRow : int * int * int * int -> unit
Public Sub DirectErrorRow (row As Integer, outputID As Integer, errorCode As Integer, errorColumn As Integer)

매개 변수

row
Int32

오류 출력으로 전송할 행의 인덱스입니다.

outputID
Int32

IDTSOutput100 행을 보낼 오류 PipelineBuffer의 ID입니다.

errorCode
Int32

행을 처리하는 동안 발생한 오류의 번호입니다.

errorColumn
Int32

오류의 원인이 된 PipelineBuffer 열의 ID입니다.

설명

데이터 흐름 구성 요소에 해당 IsErrorOut 속성이 설정된 개체가 있는 IDTSOutput100 경우 데이터 흐름 구성 요소는 이 메서드를 호출합니다true. 구성 요소는 구성 요소에서 버퍼 행을 처리하는 동안 오류가 발생하고 입력, 출력 또는 열에 지정된 경우 RD_RedirectRow 이 메서드를 호출합니다.

적용 대상