Add-DnsServerResponseRateLimitingExceptionlist
업데이트 날짜: 2015년 5월
Add-DnsServerResponseRateLimitingExceptionlist
Adds an RRL exception list on the DNS server.
구문
Parameter Set: Add0
Add-DnsServerResponseRateLimitingExceptionlist [[-Name] <String> ] [[-ClientSubnet] <String> ] [[-Fqdn] <String> ] [[-ServerInterfaceIP] <String> ] [[-Condition] <String> {AND | OR} ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Add-DnsServerResponseRateLimiting cmdlet adds a Response Rate Limiting (RRL) exception list on the DNS server. The RRL exception list indicates that responses to queries for specified Fully Qualified Domain Names (FQDNs), queries originating from specified client subnets, queries received on specified server interfaces, or any combination of these values, are exempt from RRL.
매개 변수
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ClientSubnet<String>
Specifies the client subnet values for the exception list.
This parameter must have the following format: COMPARATOR, value1, value2,..., COMPARATOR, value 3, value 4,..
where the COMPARATOR can be EQ or NE. There can be only one EQ and one NE in a value.
The values following the EQ operator will be treated as multiple assertions which are logically combined using the OR operator. The values following the NE operator will be treated as multiple assertions which are logically differenced using the AND operator.
Multiple values are combined using the Condition parameter as a logical operator. The same operator is also used for combining EQ and NE expressions within a value.
For example, EQ, America, Asia, NE, Europe
specifies that the client subnets of America and Asia are in the exception list, and the client subnet of Europe is not.
For details, see Add-DnsServerClientSubnet.
별칭 |
none |
필수 여부 |
false |
위치 |
3 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies a remote DNS server on which to run the command. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NetBIOS name.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Condition<String>
Specifies a logical operator for combining multiple values of the ClientSubnet, Fdqn and ServerIp parameters. The values for the parameters are combined using the Condition parameter as a logical operator. The same operator is also used for combining EQ and NE expressions within a value. The default value is AND.
별칭 |
none |
필수 여부 |
false |
위치 |
6 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Fqdn<String>
Specifies FQDN values for the exception list.
The value must have the following format: COMPARATOR, value1, value2,..., COMPARATOR, value 3, value 4,..
where the COMPARATOR can be EQ or NE. There can be only one EQ and one NE in a value.
The values following the EQ operator will be treated as multiple assertions which are logically combined using the OR operator. The values following the NE operator will be treated as multiple assertions which are logically differenced using the AND operator.
Multiple values are combined using the Condition parameter as a logical operator. The same operator is also used for combining EQ and NE expressions within a value.
For example, EQ,*.contoso.com
specifies that the contoso.com domain should be added to the exception list.
별칭 |
none |
필수 여부 |
false |
위치 |
4 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InformationAction<ActionPreference>
Specifies how this cmdlet responds to an information event. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- SilentlyContinue
-- Stop
-- Continue
-- Inquire
-- Ignore
-- Suspend
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<String>
Specifies a variable in which to store an information event message.
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies the name of the RRL exception list.
별칭 |
none |
필수 여부 |
false |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ServerInterfaceIP<String>
Specifies the server interface on which the DNS server is listening.
The value must have the following format: COMPARATOR, value1, value2,..., COMPARATOR, value 3, value 4,..
where the COMPARATOR can be EQ or NE. There can be only one EQ and one NE in a value.
The values following the EQ operator are treated as multiple assertions which are logically combined using the OR operator. The values following the NE operator are treated as multiple assertions which are logically differenced using the AND operator.
Multiple values are combined using the Condition parameter as a logical operator. The same operator is also used for combining EQ and NE expressions within a value.
For example, EQ,10.0.0.3
specifies that all queries received on a server interface that has the IP address of 10.0.0.3 should be exempt from RRL.
별칭 |
none |
필수 여부 |
false |
위치 |
5 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
Microsoft.Management.Infrastructure.CimInstance#DnsServerResponseRateLimitingExceptionlist
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
예
Example 1: Add a domain to an RRL exception list
This command adds an RRL exception for the domain contoso.com.
PS C:\> Add-DnsServerResponseRateLimitingExceptionlist -Name "SafeList1" -Fqdn "EQ,*.contoso.com"
관련 항목
Get-DnsServerResponseRateLimitingExceptionlist