Clear-BgpRouteFlapDampening
Clear-BgpRouteFlapDampening
Clears the route flap dampening information for the specified set of BGP routes.
구문
Parameter Set: Clear0
Clear-BgpRouteFlapDampening [-CimSession <CimSession[]> ] [-Force] [-InformationAction <ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <String> ] [-Prefix <String[]> ] [-RoutingDomain <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Clear-BgpRouteFlapDampening cmdlet clears the route flap dampening information for the specified set of Border Gateway Protocol (BGP) routes.
매개 변수
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Force
사용자에게 확인 메시지를 표시하지 않고 명령을 강제 실행합니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationAction<ActionPreference>
Specifies how this cmdlet responds to an information event. The acceptable values for this parameter are:
-- SilentlyContinue
-- Stop
-- Continue
-- Inquire
-- Ignore
-- Suspend
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<String>
Specifies a variable in which to store an information event message.
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Prefix<String[]>
Specifies a list of the classless IP address prefixes and their prefix lengths, for which the flap dampening is to be cleared and reset.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-RoutingDomain<String>
Specifies the user-defined unique alphanumeric identifier for the routing domain.
별칭 |
RoutingDomainName |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Specifies the maximum number of concurrent connections that can be established to run this command. If you omit this parameter or enter a value of 0, the default value, 32, is used.
The throttle limit applies only to the current command, not to the session or to the computer.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
예
Example 1: Reset BGP route flap dampening for some routes
This command resets BGP route flap dampening for routes 172.168.10.0/24 and 10.10.1.128/25.
PS C:\> Clear-BgpRouteFlapDampening –Prefix 172.168.10.0/24, 10.10.1.128/25 -Force