Enable-ClusterStorageSpacesDirect
Enable-ClusterStorageSpacesDirect
Enables Storage Spaces Direct.
구문
Parameter Set: InputObject
Enable-ClusterStorageSpacesDirect [-Cluster <String> ] [-InputObject <PSObject> ] [-S2DCacheDevice <S2DCacheDeviceType> {NVMe | AllSolidStateDisk} ] [-S2DCacheMetadataReserveBytes <UInt64> ] [-S2DCacheMode <S2DCacheState> {Disabled | ReadOnly | ReadWrite | Provisioning | ProvisioningFlash | ProvisioningSpinningMedia | Disabling | Dormant | IneligibleNoDisks | IneligibleNoFlash | IneligibleNotMixedMedia} ] [-SkipEligibilityChecks] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Enable-ClusterStorageSpacesDirect cmdlet enables highly available Storage Spaces that use directly attached storage (Storage Spaces Direct) on a cluster.
매개 변수
-Cluster<String>
Specifies the name of the cluster on which to run this cmdlet. If the input for this parameter is .
or it is omitted, then the cmdlet runs on the local cluster.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InputObject<PSObject>
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
true (ByValue) |
와일드카드 문자 허용 여부 |
false |
-S2DCacheDevice<S2DCacheDeviceType>
Specifies the type of device that Storage Spaces Direct uses for cache. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- NVMe. Non-volatile memory express (NVMe) devices only.
-- AllSSD. All solid-state drives (SSDs).
The default value is AllSSD.
If you specify a value of NVMe, failover uses only NVMe devices as the fast tier for cache. If you specify AllSSD, failover uses all SSD types as the fast tier for cache. If the system has both NVMe and SSD devices and you intend that the slower SSDs be used as a data tier, specify NVMe.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-S2DCacheMetadataReserveBytes<UInt64>
Specifies how many bytes that the cache leaves unused. Storage spaces store metadata in this location.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-S2DCacheMode<S2DCacheState>
Specifies the cache mode this cmdlet uses when enabling Storage Spaces Direct. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Disabled
-- ReadOnly
-- ReadWrite
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SkipEligibilityChecks
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
예
Example 1: Enable Storage Spaces Direct
This command enables Storage Spaces Direct on the cluster named Contoso19-C2.production.contoso.com.
PS C:\> Enable-ClusterStorageSpacesDirect -Cluster "Contoso19-C2.production.contoso.com"
Example 2: Enable Storage Spaces Direct by using the pipeline
This command gets the cluster named Contoso19-C2.production.contoso.com by using the Get-Cluster cmdlet. The command passes that cluster to the current cmdlet by using the pipeline operator. That cmdlet rnables Storage Spaces Direct on the cluster.
PS C:\> Get-Cluster -Cluster "Contoso19-C2.production.contoso.com" | Enable-ClusterStorageSpacesDirect