Get-StorageQosVolume
Get-StorageQosVolume
Retrieves per-volume performance metrics on a volume that is monitored by Storage QoS.
구문
Parameter Set: Id
Get-StorageQosVolume [-CimSession <CimSession[]> ] [-Mountpoint <String[]> ] [-Status <Status[]> ] [-ThrottleLimit <Int32> ] [-VolumeId <Guid[]> ] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Get-StorageQosVolume cmdlet retrieves per-volume storage performance metrics on a volume that services Storage Quality of Service (Storage QoS) flows. The metrics are throughput and latency averages, aggregated over all flows, and computed over a 5-minute rolling time interval.
Each file handle opened by a Hyper-V server to a VHD or VHDX file is considered a flow. If a virtual machine has two virtual hard disks attached, it has 1 flow to the file server cluster per file. If a VHDX is shared with multiple virtual machines, it has 1 flow per virtual machine.
For more information about Storage QoS, see Storage Quality of Service in Windows Server Technical Preview (https://technet.microsoft.com/en-us/library/Mt126108).
매개 변수
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Mountpoint<String[]>
Specifies the file system path of a volume.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Status<Status[]>
Specifies the status of flows on a volume.
-- Ok indicates the minimum IOPS are being met.
-- InsufficientThroughput indicates IOPS are below minimum.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-VolumeId<Guid[]>
Specifies the ID of a volume that services flows.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
Microsoft.Management.Infrastructure.CimInstance#MSFT_StorageQoSVolume
This cmdlet outputs a Common Information Model (CIM) object of type MSFT_StorageQoSVolume (https://msdn.microsoft.com/en-us/library/mt164596(v=vs.85).aspx).
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
예
Example 1: Get QoS statistics for volumes at a specified path
This command gets QoS statistics for all volumes mounted under C:\ClusterStorage.
PS C:\>
Get-StorageQosVolume -Mountpoint "C:\ClusterStorage\*"