Deploy multiple sites in Cloud Connector

Skype for Business Server 2015
 

마지막으로 수정된 항목: 2017-03-29

This section describes how to deploy multiple Public Switched Telephone Network (PSTN) sites. Sites are deployed one at a time using the same steps as deploying a single site. This topic describes the considerations for and differences between sites in a multiple site deployment.

  1. The following table shows an example configuration to deploy Skype for Business Cloud Connector Edition for different PSTN sites. Make sure your configuration settings are correct before you start a deployment.

     

    PSTN Site 1

    PSTN Site 2

    [Common]
    SiteName=Site1
    [EdgeServer]
    InternalMachineName= cc-edge1
    InternalPoolName=cc-edgepool
    InternalMachineIPs=192.168.0.241
    
    ExternalSIPPoolName=access1
    ExternalSIPIPs=192.168.1.4
    
    ExternalMRFQDNPoolName=mr1
    ExternalMRIPs=192.168.1.4
    ExternalMRPublicIPs=23.99.115.35
    
    
    [Common]
    SiteName=Site2
    [EdgeServer]
    InternalMachineName= cc-edge2
    InternalPoolName=cc-edgepool
    InternalMachineIPs=192.168.0.242
    
    ExternalSIPPoolName=access2
    ExternalSIPIPs=192.168.1.5
    
    ExternalMRFQDNPoolName=mr2
    ExternalMRIPs=192.168.1.5
    ExternalMRPublicIPs=104.42.226.134
    
    
  2. Follow the steps in Deploy a single site in Cloud Connector for each PSTN site that you want to add.

    important중요:
    The shared folder for preparing High Availability (HA) is per PSTN site. The shared folder must be different between PSTN sites. Do not use the same shared folder for multiple sites.

The following table lists the differences between single site with HA support and a multiple site deployment.

 

CategoryItemSingle-Site with HAMulti-Site

Setup

Shared folder

Requires the same shared folder across appliances

Requires a different shared folder across appliances

Configure

VirtualMachineDomain

Requires the same domain across appliances

Requires the same domain across PSTN sites

SIPDomains

Domain names and order should be the same across appliances

Domain names and order should be the same across PSTN sites

Site name

Same Site Name across appliances

Different Site Name across PSTN sites

Server names

Different across appliances

Different across PSTN sites

Internal pool FQDNs

Same across appliances

Same across PSTN sites

Internal IPs

Different across appliances

Different across PSTN sites

External FQDN

Same across appliances

Different across PSTN sites

External IPs

Different across appliances

Different across PSTN sites

PSTN GW settings

Same across appliances

Different across PSTN sites

DNS record

Add records with the same External Access FQDNs and different IP addresses

Add records with different External Access FQDNs and different IP addresses

Setup hybrid tenant

Set HybridPSTNSite

Set PeerDestination for fallback

Set HybridPSTNSite

Set PeerDestination for fallback

Setup gateway

MS GW M:N mapping in this site

PSTN gateway(s) in each PSTN site should only connect to the Mediation Server(s) in the same site

Setup user

Set UserPSTNSettings

Set UserPSTNSettings

 
표시: