Export (0) Print
Expand All
This topic has not yet been rated - Rate this topic

Microsoft Security Bulletin MS06-022 - Critical

Vulnerability in ART Image Rendering Could Allow Remote Code Execution (918439)

Published: June 13, 2006

Version: 1.0

Summary

Who Should Read this Document: Customers who use Microsoft Windows

Impact of Vulnerability: Remote Code Execution

Maximum Severity Rating: Critical

Recommendation: Customers should apply the update immediately

Security Update Replacement: None

Tested Software and Security Update Download Locations:

Affected Software:

  • Microsoft Windows XP Service Pack 1 — Download the update
  • Microsoft Windows XP Service Pack 2 — Download the update
  • Microsoft Windows XP Professional x64 Edition — Download the update
  • Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 — Download the update
  • Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with SP1 for Itanium-based Systems — Download the update
  • Microsoft Windows Server 2003 x64 Edition — Download the update
  • Microsoft Windows 98, Microsoft Windows 98 Second Edition (SE), and Microsoft Windows Millennium Edition (Me) — Review the FAQ section of this bulletin for details about these operating systems.

Tested Microsoft Windows Components:

Affected Components:

The software in this list has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

Note The security updates for Microsoft Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.

General Information

Executive Summary:

This update resolves a newly discovered, privately reported vulnerability. A remote code execution vulnerability exists in the way AOL ART images are handled. This vulnerability could allow an attacker to take complete control of an affected system. The vulnerability is documented in the "Vulnerability Details" section of this bulletin.

If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

We recommend that customers apply the update immediately.

Severity Ratings and Vulnerability Identifiers:

Vulnerability IdentifiersImpact of VulnerabilityWindows 98, 98 SE, MEWindows 2000Windows 2000 with the Windows 2000 AOL Image Support Update installedWindows XP Service Pack 1Windows XP Service Pack 2Windows Server 2003Windows Server 2003 Service Pack 1
ART Image Rendering Vulnerability - CVE-2006-2378Remote Code ExecutionCriticalNoneCriticalCriticalCriticalCriticalCritical

This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.

Note The security updates for Microsoft Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.

Note The severity ratings for non-x86 operating system versions map to the x86 operating systems versions as follows:

  • The Microsoft Windows XP Professional x64 Edition severity rating is the same as the Windows XP Service Pack 2 severity rating.
  • The Microsoft Windows Server 2003 for Itanium-based Systems severity rating is the same as the Windows Server 2003 severity rating.
  • The Microsoft Windows Server 2003 with SP1 for Itanium-based Systems severity rating is the same as the Windows Server 2003 Service Pack 1 severity rating.
  • The Microsoft Windows Server 2003 x64 Edition severity rating is the same as the Windows Server 2003 Service Pack 1 severity rating.

If I have applied MS06-021, do I need to apply this update?
After applying the Security Update included with Microsoft Security Bulletin MS06-021: Cumulative Security Update for Internet Explorer (916281), Internet Explorer will no longer render the ART image file format. This change has been made to help prevent the Internet Explorer process from closing unexpectedly when users view invalidly-formed images. The ART format is no longer supported by Internet Explorer. We recommend applying this update in addition to MS06-021, because this update resolves the underlying vulnerability.

Why are the security updates for Windows XP Service Pack 1 and Windows 2000 Service Pack 4 labeled as Internet Explorer Updates?
While this is a security update for Windows, the files are serviced from the Internet Explorer code base on these platforms. As such, it follows Internet Explorer standards for packaging as well as detection and deployment.

How does the extended support for Windows 98, Windows 98 Second Edition, and Windows Millennium Edition affect the release of security updates for these operating systems?
Microsoft will only release security updates for critical security issues. Non-critical security issues are not offered during this support period. For more information about the Microsoft Support Lifecycle policies for these operating systems, visit the following Web site.

For more information about severity ratings, visit the following Web site.

Are Windows 98, Windows 98 Second Edition, or Windows Millennium Edition critically affected by one or more of the vulnerabilities that are addressed in this security bulletin?
Yes. Windows 98, Windows 98 Second Edition, and Windows Millennium Edition are critically affected by the vulnerabilities that are addressed in this security bulletin. Critical security updates for these platforms are available, are provided as part of this security bulletin, and can be downloaded only from the Windows Update Web site. For more information about severity ratings, visit the following Web site.

Extended security update support for Microsoft Windows NT Workstation 4.0 Service Pack 6a and Windows 2000 Service Pack 2 ended on June 30, 2004. Extended security update support for Microsoft Windows NT Server 4.0 Service Pack 6a ended on December 31, 2004. Extended security update support for Microsoft Windows 2000 Service Pack 3 ended on June 30, 2005. I am still using one of these operating systems, what should I do?
Windows NT Workstation 4.0 Service Pack 6a, Windows NT Server 4.0 Service Pack 6a, Windows 2000 Service Pack 2, and Windows 2000 Service Pack 3 have reached the end of their life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.

Customers who require custom support for these products must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?
The following table provides the MBSA detection summary for this security update.

ProductMBSA 1.2.1MBSA 2.0
Microsoft Windows 2000 Service Pack 4YesYes
Microsoft Windows XP Service Pack 1 and Microsoft Windows XP Service Pack 2YesYes
Microsoft Windows XP Professional x64 EditionNoYes
Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1YesYes
Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with Service Pack 1 for Itanium-based SystemsNoYes
Microsoft Windows Server 2003 x64 Edition familyNoYes

For more information about MBSA, visit the MBSA Web site. For more information about the programs that Microsoft Update and MBSA 2.0 currently do not detect, see Microsoft Knowledge Base Article 895660.

Can I use Systems Management Server (SMS) to determine whether this update is required?
The following table provides the SMS detection summary for this security update.

ProductSMS 2.0SMS 2003
Microsoft Windows 2000 Service Pack 4YesYes
Microsoft Windows XP Service Pack 1 and Microsoft Windows XP Service Pack 2YesYes
Microsoft Windows XP Professional x64 EditionNoYes
Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1YesYes
Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with Service Pack 1 for Itanium-based SystemsNoYes
Microsoft Windows Server 2003 x64 Edition familyNoYes

SMS uses MBSA for detection. Therefore, SMS has the same limitation that is listed earlier in this bulletin related to programs that MBSA does not detect.

For SMS 2.0, the SMS SUS Feature Pack, which includes the Security Update Inventory Tool, can be used by SMS to detect security updates. SMS SUIT uses the MBSA 1.2.1 engine for detection. For more information about the Security Update Inventory Tool, visit the following Microsoft Web site. For more information about the limitations of the Security Update Inventory Tool, see Microsoft Knowledge Base Article 306460. The SMS SUS Feature Pack also includes the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 Inventory Tool for Microsoft Updates, visit the following Microsoft Web site. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For more information about SMS, visit the SMS Web site.

ART Image Rendering Vulnerability - CVE-2006-2378:

There is a remote code execution vulnerability in the way that Windows handles ART images. An attacker could exploit the vulnerability by constructing a specially crafted ART image that could potentially allow remote code execution if a user visited a Web site or viewed a specially crafted e-mail message. An attacker who successfully exploited this vulnerability could take complete control of an affected system.

Mitigating Factors for ART Image Rendering Vulnerability - CVE-2006-2378:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or instant messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • Windows 2000 does not support AOL ART images by default. Windows 2000 is only affected if the Windows 2000 AOL Image Support Update has been installed. The files being updated with this security update does not exist on a Windows 2000 system without this AOL Image Support Update.

Workarounds for ART Image Rendering Vulnerability - CVE-2006-2378:

Microsoft has tested the following workarounds. Although these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

  • Modify the Access Control List on the AOL ART files to temporarily prevent them from being displayed in Internet Explorer

    To modify the Access Control List (ACL) on the AOL ART files to be more restrictive, follow these steps:

    1. Click Start, click Run, type cmd, and then click OK.
    2. Type the following commands at a command prompt. Make a note of the current files ACLs, including inheritance settings. You may need this list if you have to undo these modifications:

      cacls %windir%\system32\jgdw400.dll
      cacls %windir%\system32\jgpl400.dll
    3. Type the following command at a command prompt to deny the ‘everyone’ group access to this file:

      echo y|cacls %windir%\system32\jgdw400.dll /d everyone
      echo y|cacls %windir%\system32\jgpl400.dll /d everyone
    4. Close Internet Explorer, and reopen it for the changes to take effect.

      Impact of Workaround: Applications and Web sites that contain AOL ART files will no longer display those images.

      To regain functionality, you must undo the modifications to the Access Control List on the AOL ART files.

  • Install Microsoft Security Bulletin MS06-021, Cumulative Security Update for Internet Explorer (916281)

    After installation of Microsoft Security Bulletin MS06-021: Cumulative Security Update for Internet Explorer (916281), ART files will no longer be displayed in Internet Explorer.

FAQ for ART Image Rendering Vulnerability - CVE-2006-2378:

What is the scope of the vulnerability?
This is a remote code execution vulnerability. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
An unchecked buffer in the ART image rendering library causes this vulnerability.

What is ART?
ART is an image file format used by the America Online (AOL) client software. Windows also includes the library and Internet Explorer displays ART images.

Note After installation of Microsoft Security Bulletin MS06-021: Cumulative Security Update for Internet Explorer (916281), ART files will no longer be displayed in Internet Explorer. We recommend installing both updates.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of the affected system.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site or HTML e-mail message that is designed to exploit this vulnerability through Internet Explorer and then persuade a user to view the Web site or HTML e-mail message. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
Workstations and terminal servers are primarily at risk. Servers could be at more risk if users who do not have sufficient administrative permissions are given the ability to log on to servers and to run programs. However, best practices strongly discourage allowing this.

Windows 2000 does not support AOL ART images by default. Windows 2000 is only affected if the Windows 2000 AOL Image Support Update has been installed.

Are Windows 98, Windows 98 Second Edition or Windows Millennium Edition critically affected by this vulnerability?
Yes. Windows 98, Windows 98 Second Edition, and Windows Millennium Edition are critically affected by the vulnerabilities that are addressed in this security bulletin. Critical security updates for these platforms are available, are provided as part of this security bulletin, and can be downloaded only from the Windows Update Web site. For more information about severity ratings, visit the following Web site.

What does the update do?
The update removes the vulnerability by modifying the way that the ART image rendering library validates the length of a message before it passes the message to the allocated buffer.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Affected Software:

For information about the specific security update for your affected software, click the appropriate link:

Windows Server 2003 (all versions)

Prerequisites
This security update requires Windows Server 2003 or Windows Server 2003 Service Pack 1.

Note The security updates for Microsoft Windows Server 2003, Microsoft Windows Server 2003 Service Pack 1, and Microsoft Windows Server 2003 x64 Edition also apply to Microsoft Windows Server 2003 R2.

Inclusion in Future Service Packs:
The update for this issue will be included in a future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb918439-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB918439.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb918439-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a reboot will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart your computer, see Microsoft Knowledge Base Article 887012.

This security update does not support HotPatching. For more information about HotPatching see Microsoft Knowledge Base Article 897341.

Removal Information

To remove this update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB918439$\Spuninst folder.

Supported Spuninst.exe Switches
SwitchDescription
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Datacenter Edition; Windows Server 2003, Enterprise Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2:

File NameVersionDateTimeSizeFolder
Jgdw400.dll106.0.0.001-Jun-200602:52163,840RTMGDR
Jgpl400.dll54.0.0.001-Jun-200602:5227,648RTMGDR
Jgdw400.dll106.0.0.001-Jun-200603:14163,840RTMQFE
Jgpl400.dll54.0.0.001-Jun-200603:1427,648RTMQFE
Jgdw400.dll106.0.0.001-Jun-200603:25163,840SP1GDR
Jgpl400.dll54.0.0.001-Jun-200603:2527,648SP1GDR
Jgdw400.dll106.0.0.001-Jun-200603:37163,840SP1QFE
Jgpl400.dll54.0.0.001-Jun-200603:3727,648SP1QFE

Windows Server, 2003 Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; and Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems:

File NameVersionDateTimeSizeCPUFolder
Wjgdw400.dll106.0.0.001-Jun-200604:09163,840x86RTMGDR\WOW
Wjgpl400.dll54.0.0.001-Jun-200604:0927,648x86RTMGDR\WOW
Wjgdw400.dll106.0.0.001-Jun-200604:10163,840x86RTMQFE\WOW
Wjgpl400.dll54.0.0.001-Jun-200604:1027,648x86RTMQFE\WOW
Wjgdw400.dll106.0.0.001-Jun-200604:12163,840x86SP1GDR\WOW
Wjgpl400.dll54.0.0.001-Jun-200604:1227,648x86SP1GDR\WOW
Wjgdw400.dll106.0.0.001-Jun-200604:10163,840x86SP1QFE\WOW
Wjgpl400.dll54.0.0.001-Jun-200604:1027,648x86SP1QFE\WOW

Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition; Windows Server 2003 R2, Standard x64 Edition; Windows Server 2003 R2, Enterprise x64 Edition; and Windows Server 2003 R2, Datacenter x64 Edition:

File NameVersionDateTimeSizeCPUFolder
Wjgdw400.dll106.0.0.001-Jun-200604:10163,840x86SP1GDR\WOW
Wjgpl400.dll54.0.0.001-Jun-200604:1027,648x86SP1GDR\WOW
Wjgdw400.dll106.0.0.001-Jun-200604:09163,840x86SP1QFE\WOW
Wjgpl400.dll54.0.0.001-Jun-200604:0927,648x86SP1QFE\WOW

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry key.

Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Datacenter Edition; Windows Server 2003, Enterprise Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2; Windows Server 2003, Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems; Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition; Windows Server 2003 R2, Standard x64 Edition; Windows Server 2003 R2, Enterprise x64 Edition; and Windows Server 2003 R2, Datacenter x64 Edition:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP2\KB918439\Filelist

Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly if an administrator or an OEM integrates or slipstreams the 918439 security update into the Windows installation source files.

Windows XP Service Pack 2 (all versions) and Windows XP Professional x64

This security update requires Microsoft Windows XP Service Pack 2. For more information, see Microsoft Knowledge Base Article 322389.

Note For Windows XP Professional x64, this security update is the same as the Windows Server 2003 x64 Edition security update.

Inclusion in Future Service Packs:
The update for this issue will be included in a future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Microsoft Windows XP:

Windowsxp-kb918439-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB918439.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows XP:

Windowsxp-kb918439-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a reboot will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart your computer, see Microsoft Knowledge Base Article 887012.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB918439$\Spuninst folder.

Supported Spuninst.exe Switches
SwitchDescription
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

File NameVersionDateTimeSizeFolder
Jgdw400.dll106.0.0.001-Jun-200618:47163,840SP2GDR
Jgpl400.dll54.0.0.001-Jun-200618:4727,648SP2GDR
Jgdw400.dll106.0.0.001-Jun-200619:39163,840SP2QFE
Jgpl400.dll54.0.0.001-Jun-200619:3927,648SP2QFE

Windows XP Professional x64:

File NameVersionDateTimeSizeCPUFolder
Wjgdw400.dll106.0.0.001-Jun-200604:10163,840x86SP1GDR\WOW
Wjgpl400.dll54.0.0.001-Jun-200604:1027,648x86SP1GDR\WOW
Wjgdw400.dll106.0.0.001-Jun-200604:09163,840x86SP1QFE\WOW
Wjgpl400.dll54.0.0.001-Jun-200604:0927,648x86SP1QFE\WOW

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry keys.

Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP3\KB918439\Filelist

Windows XP Professional x64 Edition:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP2\KB918439\Filelist

Note These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly if an administrator or an OEM integrates or slipstreams the 918439 security update into the Windows installation source files.

Internet Explorer 6 Service Pack 1 for Windows XP Service Pack 1 (all versions) and Windows 2000 Service Pack 4 (all versions)

Prerequisites
To install the Internet Explorer 6 Service Pack 1 (SP1) version of this update, you must be running Internet Explorer 6 SP1 (version 6.00.2800.1106) on one of the following versions of Windows:

  • Microsoft Windows 2000 Service Pack 4
  • Microsoft Small Business Server 2000 Service Pack 1a (SP1a) or Small Business Server 2000 running with Windows 2000 Server Service Pack 4 (SP4).
  • Microsoft Windows XP Service Pack 1

The software that is listed has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.

Inclusion in Future Service Packs:
The update for this issue may be included in a future Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows XP Service Pack 1:

IE6.0sp1-KB918439-Windows-2000-XP-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB918439-IE6SP1-20060530.145346.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE6.0sp1-KB918439-Windows-2000-XP-x86-enu /norestart

For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a reboot will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart your computer, see Microsoft Knowledge Base Article 887012.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB918439-IE6SP1-20060530.145346$\Spuninst folder.

Supported Spuninst.exe Switches
SwitchDescription
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed.
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart.
Special Options
/forceappsclose Forces other programs to close when the computer shuts down.
/log:path Allows the redirection of installation log files.

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows XP Home Edition Service Pack 1, Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, Windows XP Media Center Edition, Windows 2000 Service Pack 4 and Small Business Server 2000:

File NameVersionDateTimeSize
Jgdw400.dll106.0.0.027-May-200605:19163,840
Jgpl400.dll54.0.0.006-Apr-200623:1527,648

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Internet Explorer 6\SP1\KB918439-IE6SP1-20060530.145346\Filelist

Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly when an administrator or an OEM integrates or slipstreams the 918439 security update into the Windows installation source files.

Internet Explorer 5.01 Service Pack 4 on Windows 2000 (all versions)

Prerequisites
For Windows 2000, this security update requires Service Pack 4 (SP4). For Small Business Server 2000, this security update requires Small Business Server 2000 Service Pack 1a (SP1a) or Small Business Server 2000 running with Windows 2000 Server Service Pack 4 (SP4).

The software that is listed has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.

Inclusion in Future Service Packs:
The update for this issue may be included in a future Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed.
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/extract[:path] Extracts files without starting the Setup program.
/ER Enables extended error reporting.
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE5.01sp4-KB918439-Windows2000sp4-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB918439-IE501SP4-20060530.181133.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE5.01sp4-KB918439-Windows2000sp4-x86-enu /norestart

For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart. To help reduce the chance that a reboot will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart your computer, see Microsoft Knowledge Base Article 887012.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB918439-IE501SP4-20060530.181133$\Spuninst folder.

Supported Spuninst.exe Switches
SwitchDescription
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed.
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart.
Special Options
/forceappsclose Forces other programs to close when the computer shuts down.
/log:path Allows the redirection of installation log files.

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows 2000 Service Pack 4 and Small Business Server 2000:

File NameVersionDateTimeSize
Jgdw400.dll106.0.0.027-May-200605:19163,840
Jgpl400.dll54.0.0.006-Apr-200623:1527,648

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Internet Explorer 5.01\SP4\KB918439-IE501SP4-20060530.181133\Filelist

Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly when an administrator or an OEM integrates or slipstreams the 918439 security update into the Windows installation source files.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

  • iDEFENSE for reporting the ART Image Rendering Vulnerability (CVE-2006-2378).

Obtaining Other Security Updates:

Updates for other security issues are available at the following locations:

Support:

  • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Security Resources:

Software Update Services:

By using Microsoft Software Update Services (SUS), administrators can quickly and reliably deploy the latest critical updates and security updates to Windows 2000 and Windows Server 2003-based servers, and to desktop systems that are running Windows 2000 Professional or Windows XP Professional.

For more information about how to deploy security updates by using Software Update Services, visit the Software Update Services Web site.

Windows Server Update Services:

By using Windows Server Update Services (WSUS), administrators can quickly and reliably deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 onto Windows 2000 and later operating systems.

For more information about how to deploy security updates using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server:

Microsoft Systems Management Server (SMS) delivers a highly configurable enterprise solution for managing updates. By using SMS, administrators can identify Windows-based systems that require security updates and can perform controlled deployment of these updates throughout the enterprise with minimal disruption to end users. For more information about how administrators can use SMS 2003 to deploy security updates, visit the SMS 2003 Security Patch Management Web site. SMS 2.0 users can also use Software Updates Service Feature Pack to help deploy security updates. For information about SMS, visit the SMS Web site.

Note SMS uses the Microsoft Baseline Security Analyzer, the Microsoft Office Detection Tool, and the Enterprise Update Scanning Tool to provide broad support for security bulletin update detection and deployment. Some software updates may not be detected by these tools. Administrators can use the inventory capabilities of the SMS in these cases to target updates to specific systems. For more information about this procedure, visit the following Web site. Some security updates require administrative rights following a restart of the system. Administrators can use the Elevated Rights Deployment Tool (available in the SMS 2003 Administration Feature Pack and in the SMS 2.0 Administration Feature Pack) to install these updates.

Disclaimer:

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions:

  • V1.0 (June 13, 2006): Bulletin published.

Built at 2014-04-18T13:49:36Z-07:00

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.