Export (0) Print
Expand All
This topic has not yet been rated - Rate this topic

Microsoft Security Bulletin MS08-019 - Important

Vulnerabilities in Microsoft Visio Could Allow Remote Code Execution (949032)

Published: April 08, 2008 | Updated: April 23, 2008

Version: 1.5

General Information

Executive Summary

This security update resolves privately reported vulnerabilities in Microsoft Visio that could allow remote code execution if a user opens a specially crafted Visio file. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

This security update is rated Important for Microsoft Visio 2002 Service Pack 2, Microsoft Visio 2003 Service Pack 2, Microsoft Visio 2003 Service Pack 3, Microsoft Visio 2007, and Microsoft Visio 2007 Service Pack 1. For more information, see the subsection, Affected and Non-Affected Software, in this section.

This security update addresses these vulnerabilities by modifying the way that Microsoft Visio performs validations when opening Visio files. For more information about the vulnerability, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Recommendation. Microsoft recommends that customers apply the update at the earliest opportunity.

Known Issues. Microsoft Knowledge Base Article 949032 documents the currently known issues and recommended solutions that customers may experience when installing this security update. When currently known issues and recommended solutions pertain only to specific releases of this software, this article provides links to further articles.

Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software

Office SoftwareMaximum Security ImpactAggregate Severity RatingBulletins Replaced by this Update
Microsoft Visio 2002 Service Pack 2
(KB947896)
Remote Code ExecutionImportantMS07-030
Microsoft Visio 2003 Service Pack 2
(KB947650)
Remote Code ExecutionImportantMS07-030
Microsoft Visio 2003 Service Pack 3
(KB947650)
Remote Code ExecutionImportantMS07-030
Microsoft Visio 2007
(KB947590)
Remote Code ExecutionImportantNone
Microsoft Visio 2007 Service Pack 1
(KB947590)
Remote Code ExecutionImportantNone

Non-Affected Software

Other Office Software
Microsoft Visio 2002 Viewer
Microsoft Visio 2003 Viewer
Microsoft Visio 2007 Viewer
Microsoft Visio 2007 Viewer Service Pack 1

Why did Microsoft revise this bulletin on April 18, 2008? 
This bulletin has been revised to correct detection and installation issues that had impacted users of Microsoft Office 2007 components. The update previously offered and installed the Visio 2007 update to users who did not have Visio 2007 installed on their systems. Microsoft has corrected the issue and updated this bulletin to reference the change. This change was a detection change only that does not affect the files contained in the initial update. Systems running Visio 2007 that have already applied the update will not be re-offered the update, and users who have already installed the update will not need to re-apply it to their systems.

What is the security impact of this update having been installed if I do not have Visio 2007 installed on my system? What should I do? 
None. Having incorrectly installed this update on a system that does not have Visio 2007 installed will not increase the security risk of that system. Users can uninstall the update if the update has already been applied. However, uninstalling the update is not required, as the update will not have a negative impact on the security or performance of a system.

I use Microsoft Office 2003 Service Pack 2. Are any additional security features included in this update? 
Yes, as part of the servicing model for Microsoft Office 2003, when users of Microsoft Office 2003 Service Pack 2 install this update, their systems will be upgraded to security functionality that was initially released with Microsoft Office 2003 Service Pack 3. All updates released after January 1, 2008 for Microsoft Office 2003 Service Pack 2 will include these security features, which were introduced in Microsoft Office 2003 Service Pack 3. We have thoroughly tested this update, but as with all updates, we recommend that users perform testing appropriate to the environment and configuration of their systems. For more information on this issue, please see Microsoft Knowledge Base Article 951646.

Where are the file information details? 
The file information details can be found in Microsoft Knowledge Base Article 949032.

I am using an older release of the software discussed in this security bulletin. What should I do? 
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. To determine the support life cycle for your software release, visit Microsoft Support Lifecycle.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit Microsoft Support Lifecycle. For more information about the extended security update support period for these software versions or editions, visit Microsoft Product Support Services.

Customers who require custom support for older releases must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit Microsoft Worldwide Information, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Vulnerability Information

Affected SoftwareVisio Object Header Vulnerability CVE-2008-1089Visio Memory Validation Vulnerability CVE-2008-1090Aggregate Severity Rating
Microsoft Visio 2002 Service Pack 2Important
Remote Code Execution
Moderate
Remote Code Execution
Important
Microsoft Visio 2003 Service Pack 2Important
Remote Code Execution
Moderate
Remote Code Execution
Important
Microsoft Visio 2003 Service Pack 3Important
Remote Code Execution
Moderate
Remote Code Execution
Important
Microsoft Visio 2007Important
Remote Code Execution
Moderate
Remote Code Execution
Important
Microsoft Visio 2007 Service Pack 1Important
Remote Code Execution
Moderate
Remote Code Execution
Important

A remote code execution vulnerability exists in the way Microsoft Visio validates object header data in specially crafted files. An attacker could exploit the vulnerability by sending a malformed file which could be included as an e-mail attachment, or hosted on a specially crafted or compromised Web site.

If a user were logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less affected than users who operate with administrative user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2008-1089.

Mitigating Factors for Visio Object Header Vulnerability - CVE-2008-1089

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • The vulnerability cannot be exploited automatically through e-mail. For an attack to be successful, a user must open an attachment that is sent in an e-mail message.

Workarounds for Visio Object Header Vulnerability - CVE-2008-1089

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Use Microsoft Visio 2003 Viewer or Microsoft Visio 2007 Viewer to open and view Visio files. Microsoft Visio 2003 Viewer and Microsoft Visio 2007 Viewer are not affected by the issue.
  • Do not open or save Visio files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.

FAQ for Visio Object Header Vulnerability - CVE-2008-1089

What is the scope of the vulnerability? 
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system remotely. An attacker could then install programs or view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability? 
Microsoft Visio does not properly validate object header data when opening Visio files.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could run arbitrary code as the logged-on user. If a user is logged on with administrative user rights, an attacker could take complete control of the affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability? 
This vulnerability requires that a user open a malformed Visio file with an affected version of Microsoft Visio.

In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a malformed Visio file to the user and by convincing the user to open the file.

In a Web-based attack scenario, an attacker would have to host a Web site that contains an Visio file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link that takes them to the attacker's site.

What systems are primarily at risk from the vulnerability? 
Systems where Microsoft Visio is used are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do? 
The update removes the vulnerability by performing validation when allocating space for object header data when opening Visio files.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued. This security bulletin addresses the privately disclosed vulnerability as well as additional issues discovered through internal investigations.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

A remote code execution vulnerability exists in the way Microsoft Visio validates memory allocations when loading specially-crafted .DXF files from disk into memory. An attacker could exploit the vulnerability by sending a malformed file which could be included as an e-mail attachment, or hosted on a specially crafted or compromised Web site.

If a user were logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less affected than users who operate with administrative user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2008-1090.

Mitigating Factors for Visio Memory Validation Vulnerability - CVE-2008-1090

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • By default, AutoCAD drawing files (.DXF file extension) are not registered by Visio by default and would not open a specially crafted .DXF file by double clicking on it. An attacker would have to convince a user to open a .DXF file by opening Visio, selecting Open and then change the default file type from "All Visio Files" to "AutoCAD Drawing".
  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • The vulnerability cannot be exploited automatically through e-mail. For an attack to be successful, a user must open an attachment that is sent in an e-mail message.

Workarounds for Visio Memory Validation Vulnerability - CVE-2008-1090

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Disable Visio from opening .DXF file by restricting access to DWGDP.DLL.

    To restrict access to DWGDP.DLL, type the following at the command prompt:

    Note For Vista, an account with administrator privileges is required to implement this workaround.

    For Windows XP
    Echo y|cacls "%ProgramFiles%\microsoft office\visio11\dll\dwgdp.dll" /D everyone

    For Windows Vista
    Takeown.exe /f "%ProgramFiles%\microsoft office\visio11\dll\dwgdp.dll"

    Icacls.exe "%ProgramFiles%\microsoft office\visio11\dll\dwgdp.dll" /save %TEMP%\DWGDP_ACL.TXT

    Icacls.exe "%ProgramFiles%\microsoft office\visio11\dll\dwgdp.dll" /deny everyone:(F)

    Impact of Workaround: The impact of implementing this workaround is that Visio will no longer open AutoCAD drawing files (.DXF). If you have no need to open AutoCAD drawing files, this workaround should have no impact to your system’s functionality.

    How to Undo the Workaround: To rollback this workaround, type the following at the command prompt:

    For Windows XP
    cacls "%ProgramFiles%\microsoft office\visio11\dll\dwgdp.dll" /G everyone

    For Windows Vista
    Icacls "%ProgramFiles%\microsoft office\visio11\dll\dwgdp.dll" /grant everyone:(F)

    Icacls "%ProgramFiles%\microsoft office\visio11\dll\dwgdp.dll" /restore %TEMP%\DWGDP_ACL.TXT
  • Use Microsoft Visio 2003 Viewer or Microsoft Visio 2007 Viewer to open and view Visio files. Microsoft Visio 2003 Viewer and Microsoft Visio 2007 Viewer are not affected by the issue.
  • Do not open or save Microsoft Office files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.

FAQ for Visio Memory Validation Vulnerability - CVE-2008-1090

What is the scope of the vulnerability? 
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system remotely. An attacker could then install programs or view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability? 
Microsoft Visio does not properly validate memory allocations when loading specially crafted .DXF files from disk into memory.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could run arbitrary code as the logged-on user. If a user is logged on with administrative user rights, an attacker could take complete control of the affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability? 
This vulnerability requires that a user open a malformed .DXF file with an affected version of Microsoft Visio.

In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a malformed Visio file to the user and by convincing the user to open the file.

In a Web-based attack scenario, an attacker would have to host a Web site that contains an Visio file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link that takes them to the attacker's site.

What systems are primarily at risk from the vulnerability? 
Systems where Microsoft Visio is used are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do? 
The update removes the vulnerability by performing proper validation of memory allocations when loading Visio files from disk into memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued. This security bulletin addresses the privately disclosed vulnerability as well as additional issues discovered through internal investigations.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Update Information

Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.

Security updates are available from Microsoft Update, Windows Update, and Office Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."

Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, “MS07-036”), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.

Detection and Deployment Guidance

Microsoft has provided detection and deployment guidance for this month’s security updates. This guidance will also help IT professionals understand how they can use various tools to help deploy the security update, such as Windows Update, Microsoft Update, Office Update, the Microsoft Baseline Security Analyzer (MBSA), the Office Detection Tool, Microsoft Systems Management Server (SMS), and the Extended Security Update Inventory Tool. For more information, see Microsoft Knowledge Base Article 910723.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.

The following table provides the MBSA detection summary for this security update.

Software MBSA 2.0.1
Microsoft Visio 2002 Service Pack 2Yes
Microsoft Visio 2003 Service Pack 2Yes
Microsoft Visio 2003 Service Pack 3Yes
Microsoft Visio 2007Yes
Microsoft Visio 2007 Service Pack 1Yes

For more information about MBSA 2.0.1, see MBSA 2.0 Frequently Asked Questions.

Note For customers using legacy software not supported by MBSA 2.0.1, Microsoft Update, and Windows Server Update Services: please visit Microsoft Baseline Security Analyzer and reference the Legacy Product Support section on how to create comprehensive security update detection with legacy tools.

Windows Server Update Services

By using Windows Server Update Services (WSUS), administrators can deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 to Windows 2000 and later operating systems. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server

The following table provides the SMS detection and deployment summary for this security update.

SoftwareSMS 2.0SMS 2003 with SUSFPSMS 2003 with ITMUSCCM 2007
Microsoft Visio 2002 Service Pack 2YesYesYesYes
Microsoft Visio 2003 Service Pack 2YesYesYesYes
Microsoft Visio 2003 Service Pack 3YesYesYesYes
Microsoft Visio 2007NoNoYesYes
Microsoft Visio 2007 Service Pack 1NoNoYesYes

For SMS 2.0 and SMS 2003, the SMS SUS Feature Pack (SUSFP), which includes the Security Update Inventory Tool (SUIT), can be used by SMS to detect security updates. See also Downloads for Systems Management Server 2.0.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications. For more information about the Office Inventory Tool and other scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.

System Center Configuration Manager (SCCM) 2007 uses WSUS 3.0 for detection of updates. For more information about SCCM 2007 Software Update Management, visit System Center Configuration Manager 2007.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Note If you have used an Administrative Installation Point (AIP) for deploying Office XP or Office 2003, you may not be able to deploy the update using SMS if you have updated the AIP from the original baseline. For more information, see the Office Administrative Installation Point heading in this section.

Office Administrative Installation Point

If you installed your application from a server location, the server administrator must update the server location with the administrative update and deploy that update to your system.

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

Visio 2002 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThere are no more service packs planned for this software. The update for this issue may be included in a future update rollup.
Deployment
Installing without user interventionVisio2002-KB947896-FullFile-ENU/q:a
Installing without restartingVisio2002-KB947896-FullFile-ENU /r:n
Update log fileNot applicable
Further informationFor detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance.

For features you can selectively install, see the Office Features for Administrative Installations subsection in this section.

Restart Requirement
Restart required?This update does not require a restart.
HotpatchingNot applicable
Removal InformationUse Add or Remove Programs tool in Control Panel.

Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

File InformationSee Microsoft Knowledge Base Article 949032
Registry Key VerificationNot applicable

Office Features

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update. To install all features, you can use REINSTALL=ALL or you can install the following features:

ProductFeature
VISVEA, VISPRO, VISPRORBuilding_Plan_Unitless,CAD_Drawing_Display_Unitless,Database_Design_Unitless,Organization_Charts_Unitless,Software_Design_Unitless,VisioCore
VISSTD, VISSTDRBuilding_Plan_Unitless,CAD_Drawing_Display_Unitless,Organization_Charts_Unitless,VisioCore

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/qSpecifies quiet mode, or suppresses prompts, when files are being extracted.
/q:uSpecifies user-quiet mode, which presents some dialog boxes to the user.
/q:aSpecifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:pathSpecifies the target folder for extracting files.
/cExtracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:pathOverrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:nNever restarts the system after installation.
/r:IPrompts the user to restart the system if a restart is required, except when used with /q:a.
/r:aAlways restarts the system after installation.
/r:sRestarts the system after installation without prompting the user.
/n:vNo version checking - Install the program over any earlier version.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs tool in Control Panel. Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the “Microsoft Baseline Security Analyzer” heading under the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Visio 2003 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup.
Deployment
Installing without user interventionVisio2003-KB947650-FullFile-ENU /q:a
Installing without restartingVisio2003-KB947650-FullFile-ENU /r:n
Update log fileNot applicable
Further informationFor detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance.

For features you can selectively install, see the Office Features for Administrative Installations subsection in this section.

Restart Requirement
Restart required?This update does not require a restart.
HotpatchingNot applicable
Removal InformationUse Add or Remove Programs tool in Control Panel.

Note When you remove this update, you may be prompted to insert the Microsoft Office 2003 CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

File InformationSee Microsoft Knowledge Base Article 949032
Registry Key VerificationNot applicable

Office Features

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update. To install all features, you can use REINSTALL=ALL or you can install the following features:

ProductFeature
VISVEA, VISPRO, VISPRORBuilding_Plan_Unitless,CAD_Drawing_Display_Unitless,Database_Design_Unitless,Organization_Charts_Unitless,Software_Design_Unitless,VisioCore
VISSTD, VISSTDRBuilding_Plan_Unitless,CAD_Drawing_Display_Unitless,Organization_Charts_Unitless,VisioCore

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/qSpecifies quiet mode, or suppresses prompts, when files are being extracted.
/q:uSpecifies user-quiet mode, which presents some dialog boxes to the user.
/q:aSpecifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:pathSpecifies the target folder for extracting files.
/cExtracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:pathOverrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:nNever restarts the system after installation.
/r:IPrompts the user to restart the system if a restart is required, except when used with /q:a.
/r:aAlways restarts the system after installation.
/r:sRestarts the system after installation without prompting the user.
/n:vNo version checking - Install the program over any earlier version.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs tool in Control Panel.

Note When you remove this update, you may be prompted to insert the Microsoft Office 2003 CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the “Microsoft Baseline Security Analyzer” heading under the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Visio 2007 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup.
Deployment
Installing without user interventionVisio2007-kb947590-fullfile-x86-glb /passive
Installing without restartingVisio2007-kb947590-fullfile-x86-glb /norestart
Update log fileNot applicable
Further informationFor detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance.

For features you can selectively install, see the Office Features for Administrative Installations subsection in this section.

Restart Requirement
Restart required?This update does not require a restart.
HotpatchingNot applicable
Removal InformationUse Add or Remove Programs tool in Control Panel.
File InformationSee Microsoft Knowledge Base Article 949032
Registry Key VerificationNot applicable

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/? or /helpDisplays usage dialog.
/passiveSpecifies passive mode. Requires no user interaction; users see basic progress dialogs but cannot cancel.
/quietSpecifies quiet mode, or suppresses prompts, when files are being extracted.
/norestartSuppresses restarting the system if the update requires a restart.
/forcerestartAutomatically restarts the system after applying the update, regardless of whether the update requires the restart.
/extractExtracts the files without installing them. You are prompted for a target folder.
/extract:<path>Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/lang:<LCID>Forces the use of a specific language, when the update package supports that language.
/log:<log file>Enables logging, by both Vnox and Installer, during the update installation.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs tool in Control Panel.

Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the “Microsoft baseline Security Analyzer” heading under the section, Microsoft Detection and Deployment Tools and Guidance.

  • File Version Verification

Note Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

    Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

    Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Office Features

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

  • An anonymous finder for reporting the Visio Object Header Vulnerability - CVE-2008-1089.
  • An anonymous finder for reporting the Visio Memory Validation Vulnerability - CVE-2008-1090.

Support

  • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (April 8, 2008): Bulletin published.
  • V1.1 (April 9, 2008): Known Issues updated.
  • V1.2 (April 11, 2008): Bulletin updated. FAQ entry added about known issue relating to a Visio 2007 detection problem.
  • V1.3 (April 16, 2008): Bulletin updated: Added entry to Update FAQ to describe additional security features included for Microsoft Office 2003 Service Pack 2. Clarified the affected software table.
  • V1.4 (April 18, 2008): Updated FAQ entry about known issue relating to a Visio 2007 detection problem.
  • V1.5 (April 23, 2008): Clarified the Update FAQ entry about the last revision, dated April 18. That change was a detection change only that does not affect the files contained in the initial update.

Built at 2014-04-16T02:39:51Z-07:00

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.