Export (0) Print
Expand All
This topic has not yet been rated - Rate this topic

Microsoft Security Bulletin MS08-034 - Important

Vulnerability in WINS Could Allow Elevation of Privilege (948745)

Published: June 10, 2008 | Updated: June 11, 2008

Version: 1.1

General Information

Executive Summary

This security update resolves a privately reported vulnerability in the Windows Internet Name Service (WINS) that could allow elevation of privilege. A local attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts.

This security update is rated Important for all supported editions of Microsoft Windows 2000 Server and Windows Server 2003. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The update removes the vulnerability by validating the data structures of network packets processed by WINS. For more information about the vulnerability, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Recommendation. Microsoft recommends that customers apply the update at the earliest opportunity.

Known Issues. None

Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software

Operating SystemMaximum Security ImpactAggregate Severity RatingBulletins Replaced by this Update
Microsoft Windows 2000 Server Service Pack 4Elevation of PrivilegeImportantMS04-045
Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2Elevation of PrivilegeImportantNone
Windows Server 2003 x64 EditionElevation of PrivilegeImportantMS04-045
Windows Server 2003 x64 Edition Service Pack 2Elevation of PrivilegeImportantNone
Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based SystemsElevation of PrivilegeImportantNone

Non-Affected Software

Operating System
Microsoft Windows 2000 Professional Service Pack 4
Windows XP Service Pack 2 and Windows XP Service Pack 3
Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2
Windows Vista and Windows Vista Service Pack 1
Windows Vista x64 Edition and Windows Vista x64 Edition Service Pack 1
Windows Server 2008 for 32-bit Systems
Windows Server 2008 for x64-based Systems
Windows Server 2008 for Itanium-based Systems

Where are the file information details? 
The file information details can be found in Microsoft Knowledge Base Article 948745.

The description of the vulnerability sounds like remote code execution. Why is this a local elevation of privilege vulnerability? 
In order to exploit this vulnerability, an attacker would have to log onto the affected WINS server with valid credentials, run an application that crafts malicious SDP packets, and then send those packets to the locally running WINS service. The WINS service will not accept SDP packets from a remote location and can only accept these packets from the local host. An attacker must have valid logon credentials and be able to log on locally to exploit this vulnerability. The vulnerability could not be exploited remotely or by anonymous users.

I am running one of the platforms that are listed in the affected software table. Why am I not being offered the update? 
The update can only be installed if WINS is enabled on the operating systems listed in the Affected Software table. By default, WINS is not enabled on these operating systems, so the update will not be offered unless WINS has been enabled.

I am using an older release of the software discussed in this security bulletin. What should I do? 
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. To determine the support life cycle for your software release, visit Microsoft Support Lifecycle.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit Microsoft Support Lifecycle. For more information about the extended security update support period for these software versions or editions, visit Microsoft Product Support Services.

Customers who require custom support for older releases must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit Microsoft Worldwide Information, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Vulnerability Information

Vulnerability Severity Rating and Maximum Security Impact by Affected Software
Affected SoftwareMemory Overwrite Vulnerability - CVE-2008-1451Aggregate Severity Rating
Microsoft Windows 2000 Server Service Pack 4Important
Elevation of Privilege
Important
Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2Important
Elevation of Privilege
Important
Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2Important
Elevation of Privilege
Important
Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based SystemsImportant
Elevation of Privilege
Important

An elevation of privilege vulnerability exists in the Windows Internet Name Service (WINS) in the way that WINS does not sufficiently validate the data structures within specially crafted WINS network packets. The vulnerability could allow a local attacker to run code with elevated privileges. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete date; or create new accounts. An attacker must have valid logon credentials and be able to log on locally to exploit this vulnerability. The vulnerability could not be exploited remotely or by anonymous users.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2008-1451.

Mitigating Factors for Memory Overwrite Vulnerability - CVE-2008-1451

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability.

  • Microsoft has not identified any mitigations for this vulnerability.

Workarounds for Memory Overwrite Vulnerability - CVE-2008-1451

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Microsoft has not identified any workarounds for this vulnerability.

FAQ for Memory Overwrite Vulnerability - CVE-2008-1451

What is the scope of the vulnerability? 
An elevation of privilege vulnerability exists in WINS. An attacker who successfully exploited this vulnerability could run code with elevated privileges. An attacker could then take complete control of an affected system. Visit the WINS Technet article for more information.

What causes the vulnerability? 
WINS does not correctly validate the data structures within specifically crafted WINS network packets.

What is WINS?
WINS is a service that translates NetBIOS names into addresses on a TCP/IP network. Although NetBIOS and NetBIOS names can be used with network protocols other than TCP/IP, Windows Internet Naming Service (WINS) was designed specifically to support NetBIOS over TCP/IP (NetBT). WINS is required for any environment in which users access resources that have NetBIOS names. If you do not use WINS in such a network, you cannot connect to a remote network resource by using its NetBIOS name unless each system includes its own Lmhosts files, and you might be unable to establish file and print sharing connections.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could gain complete control over the affected system. An attacker could then install programs; view, change, or delete data; or create new accounts.

How could an attacker exploit the vulnerability?  
To exploit this vulnerability a local attacker would have to send a specifically crafted packet to the affected WINS service.

What systems are primarily at risk from the vulnerability? 
Windows WINS Servers are at risk from this vulnerability.

What does the update do? 
The update removes the vulnerability by validating the data structures of network packets processed by WINS.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Update Information

Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.

Security updates are available from Microsoft Update, Windows Update, and Office Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."

Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, “MS07-036”), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.

Detection and Deployment Guidance

Microsoft has provided detection and deployment guidance for this month’s security updates. This guidance will also help IT professionals understand how they can use various tools to help deploy the security update, such as Windows Update, Microsoft Update, Office Update, the Microsoft Baseline Security Analyzer (MBSA), the Office Detection Tool, Microsoft Systems Management Server (SMS), and the Extended Security Update Inventory Tool. For more information, see Microsoft Knowledge Base Article 910723.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.

The following table provides the MBSA detection summary for this security update.

Software MBSA 2.1
Microsoft Windows 2000 Server Service Pack 4Yes
Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2Yes
Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2Yes
Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based SystemsYes

For more information about MBSA 2.1, see MBSA 2.1 Frequently Asked Questions.

Windows Server Update Services

By using Windows Server Update Services (WSUS), administrators can deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server

The following table provides the SMS detection and deployment summary for this security update.

SoftwareSMS 2.0SMS 2003 with SUSFPSMS 2003 with ITMUSCCM 2007
Microsoft Windows 2000 Server Service Pack 4YesYesYesYes
Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2YesYesYesYes
Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2NoNoYesYes
Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based SystemsNoNoYesYes

For SMS 2.0 and SMS 2003, the SMS SUS Feature Pack (SUSFP), which includes the Security Update Inventory Tool (SUIT), can be used by SMS to detect security updates. See also Downloads for Systems Management Server 2.0.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications. For more information about the Office Inventory Tool and other scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.

System Center Configuration Manager (SCCM) 2007 uses WSUS 3.0 for detection of updates. For more information about SCCM 2007 Software Update Management, visit System Center Configuration Manager 2007.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

Windows 2000 Server (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue may be included in a future update rollup
Deployment
Installing without user interventionMicrosoft Windows 2000 Server Service Pack 4:
Windows2000-kb948745-x86-enu /quiet
Installing without restartingMicrosoft Windows 2000 Server Service Pack 4:
Windows2000-kb948745-x86-enu /norestart
Update log fileMicrosoft Windows 2000 Server Service Pack 4:
kb948745.log
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update
HotPatchingNot applicable
Removal InformationMicrosoft Windows 2000 Server Service Pack 4:
Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\$NTUninstallKB948745$\Spuninst folder
File InformationSee Microsoft Knowledge Base Article 948745
Registry Key VerificationMicrosoft Windows 2000 Server Service Pack 4: 

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows 2000\SP5\KB948745\Filelist


Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoemOverwrites OEM files without prompting.
/nobackupDoes not back up files needed for uninstall.
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.
/extract[:path]Extracts files without starting the Setup program.
/EREnables extended error reporting.
/verboseEnables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update supports the following setup switches.

Supported Spuninst.exe Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section.

    These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files.

Windows Server 2003 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionFor all supported 32-bit editions of Windows Server 2003:
Windowsserver2003-kb948745-x86-enu /quiet
For all supported x64-based editions of Windows Server 2003:
Windowsserver2003.WindowsXP-KB948745-x64-enu /quiet
For all supported Itanium-based editions of Windows Server 2003:
Windowsserver2003-KB948745-ia64-enu /quiet
Installing without restartingFor all supported 32-bit editions of Windows Server 2003:
Windowsserver2003-kb948745-x86-enu /norestart
For all supported x64-based editions of Windows Server 2003:
Windowsserver2003.WindowsXP-KB948745-x64-enu /norestart
For all supported Itanium-based editions of Windows Server 2003:
Windowsserver2003-KB948745-ia64-enu /norestart
Update log fileKB948745.log
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update
HotPatchingThis security update does not support HotPatching. For more information about HotPatching, see Microsoft Knowledge Base Article 897341.
Removal InformationUse Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\$NTUninstallKB948745$\Spuninst folder
File InformationSee Microsoft Knowledge Base Article 948745
Registry Key VerificationHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP3\KB948745\Filelist

Deployment Information

Installing the Update

When you install this security update, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoemOverwrites OEM files without prompting.
/nobackupDoes not back up files needed for uninstall.
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.
/integrate:pathIntegrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path]Extracts files without starting the Setup program.
/EREnables extended error reporting.
/verboseEnables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update supports the following setup switches.

Supported Spuninst.exe Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section.

    These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files.

Other Information

Support

  • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (June 10, 2008): Bulletin published.
  • V1.1 (June 11, 2008): Added entry to Update FAQ to explain why the vulnerability is not a remote code execution vulnerability. Also added entry to Update FAQ to explain why the update will not be offered unless WINS has been enabled on the system.

Built at 2014-04-02T23:59:26Z-07:00

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.