Export (0) Print
Expand All
This topic has not yet been rated - Rate this topic

Microsoft Security Bulletin MS09-040 - Important

Vulnerability in Message Queuing Could Allow Elevation of Privilege (971032)

Published: August 11, 2009 | Updated: June 30, 2010

Version: 1.1

General Information

Executive Summary

This security update resolves a privately reported vulnerability in the Windows Message Queuing Service (MSMQ). The vulnerability could allow elevation of privilege if a user received a specially crafted request to an affected MSMQ service. By default, the Message Queuing component is not installed on any affected operating system edition and can only be enabled by a user with administrative privileges. Only customers who manually install the Message Queuing component are likely to be vulnerable to this issue.

This security update is rated Important for Microsoft Windows 2000 Service Pack 4, Windows XP Service Pack 2 and Windows XP Professional x64 Edition Service Pack 2; all supported editions of Windows Server 2003; and Windows Vista and Windows Vista x64 Edition. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The security update addresses the vulnerability by modifying the way that the MSMQ service validates input data before passing the data to the allocated buffer. For more information about the vulnerability see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Recommendation. The majority of customers have automatic updating enabled and will not need to take any action because this security update will be downloaded and installed automatically. Customers who have not enabled automatic updating need to check for updates and install this update manually. For information about specific configuration options in automatic updating, see Microsoft Knowledge Base Article 294871.

For administrators and enterprise installations, or end users who want to install this security update manually, Microsoft recommends that customers apply the update at the earliest opportunity using update management software, or by checking for updates using the Microsoft Update service.

See also the section, Detection and Deployment Tools and Guidance, later in this bulletin.

Known Issues. Microsoft Knowledge Base Article 971032 documents the currently known issues that customers may experience when installing this security update. The article also documents recommended solutions for these issues.

Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software

Operating SystemMaximum Security ImpactAggregate Severity RatingBulletins Replaced by this Update
Microsoft Windows 2000 Service Pack 4ImportantElevation of PrivilegeMS08-065
Windows XP Service Pack 2ImportantElevation of PrivilegeMS07-065
Windows XP Professional x64 Edition Service Pack 2ImportantElevation of PrivilegeNone
Windows Server 2003 Service Pack 2ImportantElevation of PrivilegeNone
Windows Server 2003 x64 Edition Service Pack 2ImportantElevation of PrivilegeNone
Windows Server 2003 with SP2 for Itanium-based SystemsImportantElevation of PrivilegeNone
Windows VistaImportantElevation of PrivilegeNone
Windows Vista x64 EditionImportantElevation of PrivilegeNone

Non-Affected Software

Operating System
Windows XP Service Pack 3
Windows Vista Service Pack 1, and Windows Vista Service Pack 2
Windows Vista x64 Edition Service Pack 1, and Windows Vista x64 Edition Service Pack 2
Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2
Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2
Windows Server 2008 for Itanium-based Systems and Windows Server 2008 for Itanium-based Systems Service Pack 2
Windows 7 for 32-bit Systems
Windows 7 for x64-based Systems
Windows Server 2008 R2 for x64-based Systems
Windows Server 2008 R2 for Itanium-based Systems

Where are the file information details? 
Refer to the reference tables in the Security Update Deployment section for the location of the file information details.

I am using an older release of the software discussed in this security bulletin. What should I do? 
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. To determine the support life cycle for your software release, visit Microsoft Support Lifecycle.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit Microsoft Support Lifecycle. For more information about the extended security update support period for these software versions or editions, visit Microsoft Product Support Services.

Customers who require custom support for older releases must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit Microsoft Worldwide Information, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Vulnerability Information

The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the August bulletin summary. For more information, see Microsoft Exploitability Index.

Vulnerability Severity Rating and Maximum Security Impact by Affected Software
Affected SoftwareMSMQ Null Pointer Vulnerability - CVE-2009-1922Aggregate Severity Rating
Microsoft Windows 2000 Service Pack 4Important 
Elevation of Privilege
Important
Windows XP Service Pack 2Important 
Elevation of Privilege
Important
Windows XP Professional x64 Edition Service Pack 2Important 
Elevation of Privilege
Important
Windows Server 2003 Service Pack 2Important 
Elevation of Privilege
Important
Windows Server 2003 x64 Edition Service Pack 2Important 
Elevation of Privilege
Important
Windows Server 2003 with SP2 for Itanium-based SystemsImportant 
Elevation of Privilege
Important
Windows VistaImportant 
Elevation of Privilege
Important
Windows Vista x64 EditionImportant 
Elevation of Privilege
Important

An elevation of privilege vulnerability exists in the Windows Message Queuing service (MSMQ) due to a specific flaw in the parsing of an IOCTL request to the Message Queuing service. The MSMQ service improperly checks input data before passing them to the buffer. An attacker who successfully exploited this vulnerability could execute arbitrary code and take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2009-1922.

Mitigating Factors for MSMQ Null Pointer Vulnerability - CVE-2009-1922

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • By default, the Message Queuing component is not installed on any affected operating system edition and can only be enabled by a user with administrative privileges. Only customers who manually enable the Message Queuing component are likely to be vulnerable to this issue.
  • An attacker must have valid logon credentials and be able to log on locally to exploit this vulnerability. The vulnerability could not be exploited remotely or by anonymous users

Workarounds for MSMQ Null Pointer Vulnerability - CVE-2009-1922

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Disable the Message Queuing Service:
    • Interactively

      Disabling the Message Queuing service will help protect the affected system from attempts to exploit this vulnerability. To disable the Message Queuing service, follow these steps:

      1. Click Start, and then click Control Panel. Alternatively, point to Settings, and then click Control Panel.

      2. Double-click Administrative Tools. Alternatively, click Switch to Classic View and then double-click Administrative Tools.

      3. Double-click Services.

      4. Double-click Message Queuing.

      5. In the Startup type list, click Disabled.

      6. Click Stop, and then click OK.
    • By Group Policy:

      Disable the Message Queuing service by using the Group Policy settings. You can disable the startup of this service at either the local, site, domain, or organizational-unit level by using Group Policy object functionality in Microsoft Windows 2000 domain environments or in Windows Server 2003 domain environments.

      Note: You may also review the Windows Server 2003 Security Guide. This guide includes information about how to disable services.
      For more information about Group Policy, visit the following Microsoft Web site:

      Step-by-Step Guide to Understanding the Group Policy Feature Set
      Windows 2000 Group Policy
      Group Policy in Windows Server 2003

    You can also stop and disable the MSMQ service by using the following command at the command prompt (available in Windows XP and in the Microsoft Windows 2000 Resource Kit):

    Sc stop MSMQ & sc config MSMQ start= disabled

    How to undo the workaround: Use the steps above to set the Startup Type to Automatic and start the service.

FAQ for MSMQ Null Pointer Vulnerability - CVE-2009-1922

What is the scope of the vulnerability? 
This is an elevation of privilege vulnerability. An attacker who successfully exploited this vulnerability could execute arbitrary code and take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability? 
The MSMQ service does not properly validate data passed from user mode to kernel mode, allowing an attacker to execute arbitrary code in the context of LOCAL SYSTEM.

What is Message Queuing? 
Microsoft Message Queuing technology enables applications that are running at different times to communicate across heterogeneous networks and across systems that may be temporarily offline. Applications send messages to queues and read messages from queues. Message Queuing provides guaranteed message delivery, efficient routing, security, and priority-based messaging. It can be used to implement solutions for both asynchronous and synchronous messaging scenarios. For more information about Message Queuing, see the Message Queuing product documentation.

What is Input Output Control (IOCTL)?
Windows provides the ability for applications to directly request services of device drivers. The interface through which this is done is called an Input Output Control, or IOCTL.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could run arbitrary code with elevated permissions. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

How could an attacker exploit the vulnerability? 
An attacker could exploit this vulnerability by sending a specially crafted IOCTL request to the MSMQ service. Successful exploitation of this vulnerability could lead to full access of the affected system under the LOCAL SYSTEM context.

What systems are primarily at risk from the vulnerability? 
Workstations and servers running the Message Queuing service are primarily at risk from this vulnerability.

What does the update do? 
The update addresses the vulnerability by modifying the way that the MSMQ service validates input data before passing the data to the allocated buffer.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Update Information

Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.

Security updates are available from Microsoft Update and Windows Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."

Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, "MS07-036"), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.

Note Starting August 1, 2009, Microsoft will discontinue support for Office Update and the Office Update Inventory Tool. To continue getting the latest updates for Microsoft Office products, use Microsoft Update. For more information, see About Microsoft Office Update: Frequently Asked Questions.

Detection and Deployment Guidance

Microsoft provides detection and deployment guidance for security updates. This guidance contains recommendations and information that can help IT professionals understand how to use various tools for detection and deployment of security updates. For more information, see Microsoft Knowledge Base Article 961747.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.

The following table provides the MBSA detection summary for this security update.

Software MBSA 2.1
Microsoft Windows 2000 Service Pack 4Yes
Windows XP Service Pack 2Yes
Windows XP Professional x64 Edition Service Pack 2Yes
Windows Server 2003 Service Pack 2Yes
Windows Server 2003 x64 Edition Service Pack 2Yes
Windows Server 2003 with SP2 for Itanium-based SystemsYes
Windows VistaYes
Windows Vista x64 EditionYes

For more information about MBSA 2.1, see MBSA 2.1 Frequently Asked Questions.

Windows Server Update Services

By using Windows Server Update Services (WSUS), administrators can deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server

The following table provides the SMS detection and deployment summary for this security update.

SoftwareSMS 2.0SMS 2003 with SUITSMS 2003 with ITMUConfiguration Manager 2007
Microsoft Windows 2000 Service Pack 4YesYesYesYes
Windows XP Service Pack 2YesYesYesYes
Windows XP Professional x64 Edition Service Pack 2NoNoYesYes
Windows Server 2003 Service Pack 2YesYesYesYes
Windows Server 2003 x64 Edition Service Pack 2NoNoYesYes
Windows Server 2003 with SP2 for Itanium-based SystemsNoNoYesYes
Windows VistaNoNoSee Note for Windows VistabelowYes
Windows Vista x64 EditionNoNoSee Note for Windows VistabelowYes

For SMS 2.0 and SMS 2003, the Security Update Inventory Tool (SUIT) can be used by SMS to detect security updates. See also Downloads for Systems Management Server 2.0.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. For more information about SMS scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.

System Center Configuration Manager 2007 uses WSUS 3.0 for detection of updates. For more information about Configuration Manager 2007 Software Update Management, visit System Center Configuration Manager 2007.

Note for Windows Vista Microsoft Systems Management Server 2003 with Service Pack 3 includes support for Windows Vista.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Update Compatibility Evaluator and Application Compatibility Toolkit

Updates often write to the same files and registry settings required for your applications to run. This can trigger incompatibilities and increase the time it takes to deploy security updates. You can streamline testing and validating Windows updates against installed applications with the Update Compatibility Evaluator components included with Application Compatibility Toolkit 5.0.

The Application Compatibility Toolkit (ACT) contains the necessary tools and documentation to evaluate and mitigate application compatibility issues before deploying Microsoft Windows Vista, a Windows Update, a Microsoft Security Update, or a new version of Windows Internet Explorer in your environment.

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

Windows 2000 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue may be included in a future update rollup
Deployment
Installing without user interventionWindows2000-kb971032-x86-enu /quiet
Installing without restartingWindows2000-kb971032-x86-enu /norestart
Update log filekb971032.log
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update.
HotPatchingNot applicable
Removal InformationUse Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\$NTUninstallKB971032$\Spuninst folder
File InformationSee Microsoft Knowledge Base Article 971032
Registry Key VerificationHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows 2000\SP5\KB971032\Filelist

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoemOverwrites OEM files without prompting.
/nobackupDoes not back up files needed for uninstall.
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.
/extract[:path]Extracts files without starting the Setup program.
/EREnables extended error reporting.
/verboseEnables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update supports the following setup switches.

Supported Spuninst.exe Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section.

    These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files.

Windows XP Service Pack 2 and Windows XP Professional x64 Edition Service Pack 2

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionFor Windows XP Service Pack 2:
Windowsxp-kb971032-x86-enu /quiet
For Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2:
WindowsServer2003.WindowsXP-kb971032-x64-enu /quiet
Installing without restartingFor Windows XP Service Pack 2:
Windowsxp-kb971032-x86-enu /norestart
For Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2:
WindowsServer2003.WindowsXP-kb971032-x64-enu /norestart
Update log fileKB971032.log
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update.
HotPatchingNot applicable
Removal InformationUse Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\$NTUninstallKB971032$\Spuninst folder
File InformationSee Microsoft Knowledge Base Article 971032
Registry Key VerificationFor Windows XP Service Pack 2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP3\KB971032\Filelist
For Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP3\KB971032\Filelist

Note For supported versions of Windows XP Professional x64 Edition, this security update is the same as supported versions of the Windows Server 2003 x64 Edition security update.

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoemOverwrites OEM files without prompting.
/nobackupDoes not back up files needed for uninstall.
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.
/integrate:pathIntegrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path]Extracts files without starting the Setup program.
/EREnables extended error reporting.
/verboseEnables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update supports the following setup switches.

Supported Spuninst.exe Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section.

    These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files.

Windows Server 2003 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionFor all supported 32-bit editions of Windows Server 2003:
Windowsserver2003-kb971032-x86-enu /quiet
For all supported x64-based editions of Windows Server 2003:
Windowsserver2003.WindowsXP-KB971032-x64-enu /quiet
For all supported Itanium-based editions of Windows Server 2003:
Windowsserver2003-KB971032-ia64-enu /quiet
Installing without restartingFor all supported 32-bit editions of Windows Server 2003:
Windowsserver2003-kb971032-x86-enu /norestart
For all supported x64-based editions of Windows Server 2003:
Windowsserver2003.WindowsXP-KB971032-x64-enu /norestart
For all supported Itanium-based editions of Windows Server 2003:
Windowsserver2003-KB971032-ia64-enu /norestart
Update log fileKB971032.log
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update.
HotPatchingThis security update does not support HotPatching. For more information about HotPatching, see Microsoft Knowledge Base Article 897341.
Removal InformationUse Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\$NTUninstallKB971032$\Spuninst folder
File InformationSee Microsoft Knowledge Base Article 971032
Registry Key VerificationHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP3\KB971032\Filelist

Deployment Information

Installing the Update

When you install this security update, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoemOverwrites OEM files without prompting.
/nobackupDoes not back up files needed for uninstall.
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.
/integrate:pathIntegrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path]Extracts files without starting the Setup program.
/EREnables extended error reporting.
/verboseEnables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update supports the following setup switches.

Supported Spuninst.exe Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section.

    These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files.

Windows Vista and Window Vista x64 Edition

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionFor Windows Vista:
Windows6.0-KB971032-x86 /quiet

For Windows Vista x64 Edition:
Windows6.0-KB971032-x64 /quiet
Installing without restartingFor Windows Vista:
Windows6.0-KB971032-x86 /quiet /norestart

For Windows Vista x64 Edition:
Windows6.0-KB971032-x64 /quiet /norestart
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update.
HotPatchingNot applicable.
Removal InformationWUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.
File InformationSee Microsoft Knowledge Base Article 971032
Registry Key VerificationNote A registry key does not exist to validate the presence of this update.

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/?, /h, /helpDisplays help on supported switches.
/quietSuppresses the display of status or error messages.
/norestartWhen combined with /quiet, the system will not be restarted after installation even if a restart is required to complete installation.

Note For more information about the wusa.exe installer, see Microsoft Knowledge Base Article 934307.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start and then enter an update file name in Start Search.
    2. When the file appears under Programs, right-click on the file name and click Properties.
    3. Under the General tab, compare the file size with the file information tables provided in the bulletin KB article.
    4. You may also click on the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
    5. Finally, you may also click on the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

Microsoft Active Protections Program (MAPP)

To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please visit the active protections Web sites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.

Support

  • Customers in the U.S. and Canada can receive technical support from Security Support or 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates. For more information about available support options, see Microsoft Help and Support.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (August 11, 2009): Bulletin published.
  • V1.1 (June 30, 2010): Added a link to Microsoft Knowledge Base Article 971032 under Known Issues in the Executive Summary.

Built at 2014-04-16T02:39:51Z-07:00

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.