Export (0) Print
Expand All
This topic has not yet been rated - Rate this topic

Microsoft Security Bulletin MS11-018 - Critical

Cumulative Security Update for Internet Explorer (2497640)

Published: April 12, 2011 | Updated: May 16, 2011

Version: 2.0

General Information

Executive Summary

This security update resolves four privately reported vulnerabilities and one publicly disclosed vulnerability in Internet Explorer. This security update is rated Critical for Internet Explorer 6, Internet Explorer 7, and Internet Explorer 8 on Windows clients; and Moderate for Internet Explorer 6, Internet Explorer 7, and Internet Explorer 8 on Windows servers. Internet Explorer 9 is not affected by the vulnerabilities. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The most severe vulnerabilities could allow remote code execution if a user views a specially crafted Web page using Internet Explorer. An attacker who successfully exploited any of these vulnerabilities could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

The update addresses the vulnerabilities by modifying the way that Internet Explorer handles objects in memory, content during certain processes, and script during certain processes. For more information about the vulnerabilities, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Recommendation. The majority of customers have automatic updating enabled and will not need to take any action because this security update will be downloaded and installed automatically. Customers who have not enabled automatic updating need to check for updates and install this update manually. For information about specific configuration options in automatic updating, see Microsoft Knowledge Base Article 294871.

For administrators and enterprise installations, or end users who want to install this security update manually, Microsoft recommends that customers apply the update immediately using update management software, or by checking for updates using the Microsoft Update service.

See also the section, Detection and Deployment Tools and Guidance, later in this bulletin.

Known Issues. None

Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software

Operating SystemComponentMaximum Security ImpactAggregate Severity RatingBulletins Replaced by This Update
Internet Explorer 6
Windows XP Service Pack 3Internet Explorer 6Remote Code ExecutionCriticalMS11-003
Windows XP Professional x64 Edition Service Pack 2Internet Explorer 6Remote Code ExecutionCriticalMS11-003
Windows Server 2003 Service Pack 2Internet Explorer 6Remote Code ExecutionModerateMS11-003
Windows Server 2003 x64 Edition Service Pack 2Internet Explorer 6Remote Code ExecutionModerateMS11-003
Windows Server 2003 with SP2 for Itanium-based SystemsInternet Explorer 6Remote Code ExecutionModerateMS11-003
Internet Explorer 7
Windows XP Service Pack 3Internet Explorer 7Remote Code ExecutionCriticalMS11-003
Windows XP Professional x64 Edition Service Pack 2Internet Explorer 7Remote Code ExecutionCriticalMS11-003
Windows Server 2003 Service Pack 2Internet Explorer 7Remote Code ExecutionModerateMS11-003
Windows Server 2003 x64 Edition Service Pack 2Internet Explorer 7Remote Code ExecutionModerateMS11-003
Windows Server 2003 with SP2 for Itanium-based SystemsInternet Explorer 7Remote Code ExecutionModerateMS11-003
Windows Vista Service Pack 1 and Windows Vista Service Pack 2Internet Explorer 7Remote Code ExecutionCriticalMS11-003
Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2Internet Explorer 7Remote Code ExecutionCriticalMS11-003
Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2Internet Explorer 7**Remote Code ExecutionModerateMS11-003
Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2Internet Explorer 7**Remote Code ExecutionModerateMS11-003
Windows Server 2008 for Itanium-based Systems and Windows Server 2008 for Itanium-based Systems Service Pack 2Internet Explorer 7Remote Code ExecutionModerateMS11-003
Internet Explorer 8
Windows XP Service Pack 3Internet Explorer 8Remote Code ExecutionCriticalMS11-003
Windows XP Professional x64 Edition Service Pack 2Internet Explorer 8Remote Code ExecutionCriticalMS11-003
Windows Server 2003 Service Pack 2Internet Explorer 8Remote Code ExecutionModerateMS11-003
Windows Server 2003 x64 Edition Service Pack 2Internet Explorer 8Remote Code ExecutionModerateMS11-003
Windows Vista Service Pack 1 and Windows Vista Service Pack 2Internet Explorer 8Remote Code ExecutionCriticalMS11-003
Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2Internet Explorer 8Remote Code ExecutionCriticalMS11-003
Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2Internet Explorer 8**Remote Code ExecutionModerateMS11-003
Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2Internet Explorer 8**Remote Code ExecutionModerateMS11-003
Windows 7 for 32-bit Systems and Windows 7 for 32-bit Systems Service Pack 1Internet Explorer 8Remote Code ExecutionCriticalMS11-003
Windows 7 for x64-based Systems and Windows 7 for x64-based Systems Service Pack 1Internet Explorer 8Remote Code ExecutionCriticalMS11-003
Windows Server 2008 R2 for x64-based Systems and Windows Server 2008 R2 for x64-based Systems Service Pack 1Internet Explorer 8**Remote Code ExecutionModerateMS11-003
Windows Server 2008 R2 for Itanium-based Systems and Windows Server 2008 R2 for Itanium-based Systems Service Pack 1Internet Explorer 8Remote Code ExecutionModerateMS11-003

**Server Core installation not affected. The vulnerabilities addressed by this update do not affect supported editions of Windows Server 2008 or Windows Server 2008 R2 as indicated, when installed using the Server Core installation option. For more information on this installation option, see the TechNet articles, Managing a Server Core Installation and Servicing a Server Core Installation. Note that the Server Core installation option does not apply to certain editions of Windows Server 2008 and Windows Server 2008 R2; see Compare Server Core Installation Options.

Non-Affected Software

Operating SystemComponent
Windows Vista Service Pack 2Internet Explorer 9
Windows Vista x64 Edition Service Pack 2Internet Explorer 9
Windows Server 2008 for 32-bit Systems Service Pack 2Internet Explorer 9
Windows Server 2008 for x64-based Systems Service Pack 2Internet Explorer 9
Windows 7 for 32-bit Systems and Windows 7 for 32-bit Systems Service Pack 1Internet Explorer 9
Windows 7 for x64-based Systems and Windows 7 for x64-based Systems Service Pack 1Internet Explorer 9
Windows Server 2008 R2 for x64-based Systems and Windows Server 2008 R2 for x64-based Systems Service Pack 1Internet Explorer 9

Why was this bulletin rereleased on May 16, 2011? 
Microsoft rereleased this bulletin to resolve an issue in the detection logic for Internet Explorer 7 on supported editions of Windows XP and Windows Server 2003 that may affect customers with specific configurations. The issue may result in the detection logic not offering the update, or falsely identifying that the update has been applied successfully. This rerelease is a detection change only to correct the offering logic and has no changes to the security update binaries themselves.

End users running Internet Explorer 7 on supported editions of Windows XP and Windows Server 2003 who have previously applied the update manually or through automatic updating are not affected by the issue and do not need to take any action. End users running the affected configurations, who were not correctly offered the update due to the issue with detection logic, will now be offered the update through automatic updating and should apply the update immediately.

For IT administrators, the issue with detection logic may have caused Enterprise scanning solutions (such as WSUS, System Center Configuration Manager 2007, and SMS 2003 with ITMU) to falsely identify that the update had been applied successfully on affected systems. Systems previously falsely identified as updated will now be properly identified as requiring the update.

Only affected customers will be offered the update. Customers who have installed the update manually and customers running configurations not targeted by the change to detection logic do not need to take any action.

Where are the file information details? 
Refer to the reference tables in the Security Update Deployment section for the location of the file information details.

Why does this update address several reported security vulnerabilities? 
This update contains support for several vulnerabilities because the modifications that are required to address these issues are located in related files. Instead of having to install several updates that are almost the same, customers need to install this update only.

Does this update contain any security-related changes to functionality? 
This update includes a defense-in-depth update to help improve memory protection in Internet Explorer.

What is defense-in-depth? 
In information security, defense-in-depth refers to an approach in which multiple layers of defense are in place to help prevent attackers from compromising the security of a network or system.

Internet Explorer 6 and Internet Explorer 7 are listed as affected products for CVE-2011-1244. Why is Microsoft not issuing an update for CVE-2011-1244 for these affected products? 
The architecture to properly support the fixes to prevent clickjacking does not exist in Internet Explorer 6 and Internet Explorer 7, making it infeasible to build the fixes for these products to eliminate the vulnerability described in CVE-2011-1244.

I am using an older release of the software discussed in this security bulletin. What should I do? 
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. For more information about the product lifecycle, visit the Microsoft Support Lifecycle Web site.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. To determine the support lifecycle for your software release, see Select a Product for Lifecycle Information. For more information about service packs for these software releases, see Lifecycle Supported Service Packs.

Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country in the Contact Information list, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Microsoft Support Lifecycle Policy FAQ.

Vulnerability Information

The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the April bulletin summary. For more information, see Microsoft Exploitability Index.

Vulnerability Severity Rating and Maximum Security Impact by Affected Software
Affected SoftwareLayouts Handling Memory Corruption Vulnerability - CVE-2011-0094MSHTML Memory Corruption Vulnerability - CVE-2011-0346Frame Tag Information Disclosure Vulnerability - CVE-2011-1244Javascript Information Disclosure Vulnerability - CVE-2011-1245Object Management Memory Corruption Vulnerability - CVE-2011-1345Aggregate Severity Rating
Internet Explorer 6
Internet Explorer 6 for Windows XP Service Pack 3Critical 
Remote Code Execution
Critical 
Remote Code Execution
Moderate 
Information Disclosure[1]
Important 
Information Disclosure
Critical 
Remote Code Execution
Critical
Internet Explorer 6 for Windows XP Professional x64 Edition Service Pack 2Critical 
Remote Code Execution
Critical 
Remote Code Execution
Moderate 
Information Disclosure[1]
Important 
Information Disclosure
Critical 
Remote Code Execution
Critical
Internet Explorer 6 for Windows Server 2003 Service Pack 2Moderate 
Remote Code Execution
Moderate 
Remote Code Execution
Moderate 
Information Disclosure[1]
Low 
Information Disclosure
Moderate 
Remote Code Execution
Moderate
Internet Explorer 6 for Windows Server 2003 x64 Edition Service Pack 2Moderate 
Remote Code Execution
Moderate 
Remote Code Execution
Moderate 
Information Disclosure[1]
Low 
Information Disclosure
Moderate 
Remote Code Execution
Moderate
Internet Explorer 6 for Windows Server 2003 with SP2 for Itanium-based SystemsModerate 
Remote Code Execution
Moderate 
Remote Code Execution
Moderate 
Information Disclosure[1]
Low 
Information Disclosure
Moderate 
Remote Code Execution
Moderate
Internet Explorer 7
Internet Explorer 7 for Windows XP Service Pack 3Critical 
Remote Code Execution
Critical 
Remote Code Execution
Moderate 
Information Disclosure[1]
Important 
Information Disclosure
Critical 
Remote Code Execution
Critical
Internet Explorer 7 for Windows XP Professional x64 Edition Service Pack 2Critical 
Remote Code Execution
Critical 
Remote Code Execution
Moderate 
Information Disclosure[1]
Important 
Information Disclosure
Critical 
Remote Code Execution
Critical
Internet Explorer 7 for Windows Server 2003 Service Pack 2Moderate 
Remote Code Execution
Moderate 
Remote Code Execution
Moderate 
Information Disclosure[1]
Low 
Information Disclosure
Moderate 
Remote Code Execution
Moderate
Internet Explorer 7 for Windows Server 2003 x64 Edition Service Pack 2Moderate 
Remote Code Execution
Moderate 
Remote Code Execution
Moderate 
Information Disclosure[1]
Low 
Information Disclosure
Moderate 
Remote Code Execution
Moderate
Internet Explorer 7 for Windows Server 2003 with SP2 for Itanium-based SystemsModerate 
Remote Code Execution
Moderate 
Remote Code Execution
Moderate 
Information Disclosure[1]
Low 
Information Disclosure
Moderate 
Remote Code Execution
Moderate
Internet Explorer 7 in Windows Vista Service Pack 1 and Windows Vista Service Pack 2Critical 
Remote Code Execution
Critical 
Remote Code Execution
Moderate 
Information Disclosure[1]
Important 
Information Disclosure
Critical 
Remote Code Execution
Critical
Internet Explorer 7 in Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2Critical 
Remote Code Execution
Critical 
Remote Code Execution
Moderate 
Information Disclosure[1]
Important 
Information Disclosure
Critical 
Remote Code Execution
Critical
Internet Explorer 7 in Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2**Moderate 
Remote Code Execution
Moderate 
Remote Code Execution
Moderate 
Information Disclosure[1]
Low 
Information Disclosure
Moderate 
Remote Code Execution
Moderate
Internet Explorer 7 in Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2**Moderate 
Remote Code Execution
Moderate 
Remote Code Execution
Moderate 
Information Disclosure[1]
Low 
Information Disclosure
Moderate 
Remote Code Execution
Moderate
Internet Explorer 7 in Windows Server 2008 for Itanium-based Systems and Windows Server 2008 for Itanium-based Systems Service Pack 2Moderate 
Remote Code Execution
Moderate 
Remote Code Execution
Moderate 
Information Disclosure[1]
Low 
Information Disclosure
Moderate 
Remote Code Execution
Moderate
Internet Explorer 8
Internet Explorer 8 for Windows XP Service Pack 3Not applicableCritical 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableCritical 
Remote Code Execution
Critical
Internet Explorer 8 for Windows XP Professional x64 Edition Service Pack 2Not applicableCritical 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableCritical 
Remote Code Execution
Critical
Internet Explorer 8 for Windows Server 2003 Service Pack 2Not applicableModerate 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableModerate 
Remote Code Execution
Moderate
Internet Explorer 8 for Windows Server 2003 x64 Edition Service Pack 2Not applicableModerate 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableModerate 
Remote Code Execution
Moderate
Internet Explorer 8 in Vista Service Pack 1 and Windows Vista Service Pack 2Not applicableCritical 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableCritical 
Remote Code Execution
Critical
Internet Explorer 8 in Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2Not applicableCritical 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableCritical 
Remote Code Execution
Critical
Internet Explorer 8 in Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2**Not applicableModerate 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableModerate 
Remote Code Execution
Moderate
Internet Explorer 8 in Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2**Not applicableModerate 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableModerate 
Remote Code Execution
Moderate
Internet Explorer 8 in Windows 7 for 32-bit Systems and Windows 7 for 32-bit Systems Service Pack 1Not applicableCritical 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableCritical 
Remote Code Execution
Critical
Internet Explorer 8 in Windows 7 for x64-based Systems and Windows 7 for x64-based Systems Service Pack 1Not applicableCritical 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableCritical 
Remote Code Execution
Critical
Internet Explorer 8 in Windows Server 2008 R2 for x64-based Systems and Windows Server 2008 R2 for x64-based Systems Service Pack 1**Not applicableModerate 
Remote Code Execution
Moderate 
Information Disclosure
Not applicableModerate 
Remote Code Execution
Moderate
Internet Explorer 8 in Windows Server 2008 R2 for Itanium-based Systems and Windows Server 2008 R2 for Itanium-based Systems Service Pack 1Not applicableModerate 
Remote Code Execution
Moderate 
Remote Code Execution
Not applicableModerate 
Remote Code Execution
Moderate

[1]No update available. For more information, see Frequently Asked Questions (FAQ) Related to This Security Update.

**Server Core installation not affected. The vulnerabilities addressed by this update do not affect supported editions of Windows Server 2008 or Windows Server 2008 R2 as indicated, when installed using the Server Core installation option. For more information on this installation option, see the TechNet articles, Managing a Server Core Installation and Servicing a Server Core Installation. Note that the Server Core installation option does not apply to certain editions of Windows Server 2008 and Windows Server 2008 R2; see Compare Server Core Installation Options.

A remote code execution vulnerability exists in the way that Internet Explorer accesses an object that has not been correctly initialized or has been deleted. An attacker could exploit the vulnerability by constructing a specially crafted Web page. When a user views the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2011-0094.

Mitigating Factors for Layouts Handling Memory Corruption Vulnerability - CVE-2011-0094

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • By default, all supported versions of Microsoft Outlook, Microsoft Outlook Express, and Windows Mail open HTML e-mail messages in the Restricted sites zone, which disables script and ActiveX controls, helps reduce the risk of an attacker being able to use this vulnerability to execute malicious code. If a user clicks a link in an e-mail message, the user could still be vulnerable to exploitation of this vulnerability through the Web-based attack scenario.
  • By default, Internet Explorer on Windows Server 2003, Windows Server 2008, and Windows Server 2008 R2 runs in a restricted mode that is known as Enhanced Security Configuration. This mode mitigates this vulnerability. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
  • Internet Explorer 8 and Internet Explorer 9 are not affected by this vulnerability.

Workarounds for Layouts Handling Memory Corruption Vulnerability - CVE-2011-0094

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Read e-mails in plain text

    To help protect yourself from the e-mail attack vector, read e-mail messages in plain text format.

    Microsoft Office Outlook 2002 users who have applied Office XP Service Pack 1 or a later version and Microsoft Office Outlook Express 6 users who have applied Internet Explorer 6 Service Pack 1 or a later version can enable this setting and view e-mail messages that are not digitally signed or e-mail messages that are not encrypted in plain text only.

    Digitally signed e-mail messages or encrypted e-mail messages are not affected by the setting and may be read in their original formats. For more information about how to enable this setting in Outlook 2002, see Microsoft Knowledge Base Article 307594.

    For information about this setting in Outlook Express 6, see Microsoft Knowledge Base Article 291387.

    Impact of workaround. E-mail messages that are viewed in plain text format will not contain pictures, specialized fonts, animations, or other rich content. Additionally:

    • The changes are applied to the preview pane and to open messages.
    • Pictures become attachments so that they are not lost.
    • Because the message is still in Rich Text or HTML format in the store, the object model (custom code solutions) may behave unexpectedly.
  • Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

    You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

    To raise the browsing security level in Internet Explorer, perform the following steps:

    1. On the Internet Explorer Tools menu, click Internet Options.
    2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
    3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

    Note If no slider is visible, click Default Level, and then move the slider to High.

    Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

    Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, perform the following steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

  • Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

    You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, perform the following steps:

    1. In Internet Explorer, click Internet Options on the Tools menu.
    2. Click the Security tab.
    3. Click Internet, and then click Custom Level.
    4. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    5. Click Local intranet, and then click Custom Level.
    6. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    7. Click OK two times to return to Internet Explorer.

    Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

    Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, perform the following steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

FAQ for Layouts Handling Memory Corruption Vulnerability - CVE-2011-0094

What is the scope of the vulnerability? 
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability? 
When Internet Explorer attempts to access an object that has not been initialized or has been deleted, it may corrupt memory in such a way that an attacker could execute arbitrary code in the context of the logged-on user.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could gain the same user rights as a logged-on user. If the user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

How could an attacker exploit the vulnerability? 
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. An attacker could also embed an ActiveX control marked "safe for initialization" in an application or Microsoft Office document that hosts the IE rendering engine. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to view the attacker-controlled content. Instead, an attacker would have to convince users to take action, typically by clicking a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site, or by opening an attachment sent through e-mail.

What systems are primarily at risk from the vulnerability? 
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003, Windows Server 2008, or Windows Server 2008 R2. Does this mitigate this vulnerability? 
Yes. By default, Internet Explorer on Windows Server 2003, Windows Server 2008, and Windows Server 2008 R2 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone.

What does the update do? 
The update addresses the vulnerability by modifying the way that Internet Explorer handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
Yes. Microsoft is aware of limited, targeted attacks attempting to exploit the vulnerability.

A remote code execution vulnerability exists in the way that Internet Explorer accesses an object that has not been correctly initialized or has been deleted. An attacker could exploit the vulnerability by constructing a specially crafted Web page. When a user views the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2011-0346.

Mitigating Factors for MSHTML Memory Corruption Vulnerability - CVE-2011-0346

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • By default, all supported versions of Microsoft Outlook, Microsoft Outlook Express, and Windows Mail open HTML e-mail messages in the Restricted sites zone, which disables script and ActiveX controls, removing the risk of an attacker being able to use this vulnerability to execute malicious code. If a user clicks a link in an e-mail message, the user could still be vulnerable to exploitation of this vulnerability through the Web-based attack scenario.
  • By default, Internet Explorer on Windows Server 2003, Windows Server 2008, and Windows Server 2008 R2 runs in a restricted mode that is known as Enhanced Security Configuration. This mode mitigates this vulnerability. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
  • Internet Explorer 9 is not affected by this vulnerability.

Workarounds for MSHTML Memory Corruption Vulnerability - CVE-2011-0346

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Read e-mails in plain text

    To help protect yourself from the e-mail attack vector, read e-mail messages in plain text format.

    Microsoft Office Outlook 2002 users who have applied Office XP Service Pack 1 or a later version and Microsoft Office Outlook Express 6 users who have applied Internet Explorer 6 Service Pack 1 or a later version can enable this setting and view e-mail messages that are not digitally signed or e-mail messages that are not encrypted in plain text only.

    Digitally signed e-mail messages or encrypted e-mail messages are not affected by the setting and may be read in their original formats. For more information about how to enable this setting in Outlook 2002, see Microsoft Knowledge Base Article 307594.

    For information about this setting in Outlook Express 6, see Microsoft Knowledge Base Article 291387.

    Impact of workaround. E-mail messages that are viewed in plain text format will not contain pictures, specialized fonts, animations, or other rich content. Additionally:

    • The changes are applied to the preview pane and to open messages.
    • Pictures become attachments so that they are not lost.
    • Because the message is still in Rich Text or HTML format in the store, the object model (custom code solutions) may behave unexpectedly.
  • Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

    You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

    To raise the browsing security level in Internet Explorer, perform the following steps:

    1. On the Internet Explorer Tools menu, click Internet Options.
    2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
    3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

    Note If no slider is visible, click Default Level, and then move the slider to High.

    Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

    Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, perform the following steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

  • Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

    You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, perform the following steps:

    1. In Internet Explorer, click Internet Options on the Tools menu.
    2. Click the Security tab.
    3. Click Internet, and then click Custom Level.
    4. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    5. Click Local intranet, and then click Custom Level.
    6. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    7. Click OK two times to return to Internet Explorer.

    Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

    Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, perform the following steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

FAQ for MSHTML Memory Corruption Vulnerability - CVE-2011-0346

What is the scope of the vulnerability? 
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability? 
When Internet Explorer attempts to access incorrectly initialized memory under certain conditions, it may corrupt memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could gain the same user rights as a logged-on user. If the user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

How could an attacker exploit the vulnerability? 
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability? 
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003, Windows Server 2008, or Windows Server 2008 R2. Does this mitigate this vulnerability? 
Yes. By default, Internet Explorer on Windows Server 2003, Windows Server 2008, and Windows Server 2008 R2 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone.

What does the update do? 
The update addresses the vulnerability by modifying the way that Internet Explorer handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2011-0346.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

An information disclosure vulnerability exists in Internet Explorer. An attacker could exploit the vulnerability by constructing a specially crafted Web page disguised as legitimate content. The user's actions on the page could allow information disclosure or clickjacking, whereby the user's clicks perform unwanted actions.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2011-1244.

Mitigating Factors for Frame Tag Information Disclosure Vulnerability - CVE-2011-1244

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • Internet Explorer 9 is not affected by this vulnerability.

Workarounds for Frame Tag Information Disclosure Vulnerability - CVE-2011-1244

Microsoft has not identified any workarounds for this vulnerability.

FAQ for Frame Tag Information Disclosure Vulnerability - CVE-2011-1244

What is the scope of the vulnerability? 
This is an information disclosure vulnerability. An attacker who exploited the vulnerability could deceive a user into clicking malicious content by disguising it as legitimate content on a specially crafted Web page.

What causes the vulnerability? 
During certain processes, Internet Explorer incorrectly allows attackers to access and read content from different domains.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could deceive a user into clicking malicious content by using a practice known as clickjacking.

What is clickjacking? 
Clickjacking is an online threat whereby an attacker's Web page deceives a user into clicking malicious content by disguising it as legitimate content. For example, a legitimate Web page might be hidden as a "frame" inside a malicious page. When a user clicks in the malicious page, the user is actually clicking something else: buying something from the site, changing some settings in the user's browser or computer, or viewing advertisements that cybercriminals get paid to inflate.

How could an attacker exploit the vulnerability? 
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view and perform actions on the Web site. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability? 
This vulnerability requires that a user visit and perform actions on a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

What does the update do? 
The update addresses the vulnerability by modifying the way Internet Explorer handles content during certain processes.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

An information disclosure vulnerability exists in Internet Explorer that could allow script to gain access to information in another domain or Internet Explorer zone. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow information disclosure if a user viewed the Web page. An attacker who successfully exploited this vulnerability could view content from another domain or Internet Explorer zone.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2011-1245.

Mitigating Factors for Javascript Information Disclosure Vulnerability - CVE-2011-1245

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • By default, all supported versions of Microsoft Outlook, Microsoft Outlook Express, and Windows Mail open HTML e-mail messages in the Restricted sites zone, which disables script and ActiveX controls, removing the risk of an attacker being able to use this vulnerability to execute malicious code. If a user clicks a link in an e-mail message, the user could still be vulnerable to exploitation of this vulnerability through the Web-based attack scenario.
  • By default, Internet Explorer on Windows Server 2003, Windows Server 2008, and Windows Server 2008 R2 runs in a restricted mode that is known as Enhanced Security Configuration. This mode mitigates this vulnerability. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
  • Internet Explorer 8 and Internet Explorer 9 are not affected by this vulnerability.

Workarounds for Javascript Information Disclosure Vulnerability - CVE-2011-1245

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

    You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

    To raise the browsing security level in Internet Explorer, perform the following steps:

    1. On the Internet Explorer Tools menu, click Internet Options.
    2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
    3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

    Note If no slider is visible, click Default Level, and then move the slider to High.

    Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

    Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, perform the following steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

  • Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

    You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, perform the following steps:

    1. In Internet Explorer, click Internet Options on the Tools menu.
    2. Click the Security tab.
    3. Click Internet, and then click Custom Level.
    4. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    5. Click Local intranet, and then click Custom Level.
    6. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    7. Click OK two times to return to Internet Explorer.

    Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

    Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, perform the following steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

FAQ for Javascript Information Disclosure Vulnerability - CVE-2011-1245

What is the scope of the vulnerability? 
This is an information disclosure vulnerability. An attacker who exploited the vulnerability when a user views a Web page could view content from a different domain or Internet Explorer zone other than the domain or zone of the attacker's Web page.

What causes the vulnerability? 
This vulnerability is caused when certain processes in Internet Explorer incorrectly allow scripts to access and read content from different domains.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could view content from another domain or Internet Explorer zone.

How could an attacker exploit the vulnerability? 
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability? 
This vulnerability requires that a user be logged on and visiting a Web site that references content in external windows for any malicious action to occur. Any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003, Windows Server 2008, or Windows Server 2008 R2. Does this mitigate this vulnerability? 
Yes. By default, Internet Explorer on Windows Server 2003, Windows Server 2008, and Windows Server 2008 R2 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone.

What does the update do? 
The update addresses the vulnerability by modifying the way Internet Explorer handles script during certain processes.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

A remote code execution vulnerability exists in the way that Internet Explorer accesses an object that has not been correctly initialized or has been deleted. An attacker could exploit the vulnerability by constructing a specially crafted Web page. When a user views the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2011-1345.

Mitigating Factors for Object Management Memory Corruption Vulnerability - CVE-2011-1345

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • By default, all supported versions of Microsoft Outlook, Microsoft Outlook Express, and Windows Mail open HTML e-mail messages in the Restricted sites zone, which disables script and ActiveX controls, removing the risk of an attacker being able to use this vulnerability to execute malicious code. If a user clicks a link in an e-mail message, the user could still be vulnerable to exploitation of this vulnerability through the Web-based attack scenario.
  • By default, Internet Explorer on Windows Server 2003, Windows Server 2008, and Windows Server 2008 R2 runs in a restricted mode that is known as Enhanced Security Configuration. This mode mitigates this vulnerability. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
  • Internet Explorer 9 is not affected by this vulnerability.

Workarounds for Object Management Memory Corruption Vulnerability - CVE-2011-1345

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Read e-mails in plain text

    To help protect yourself from the e-mail attack vector, read e-mail messages in plain text format.

    Microsoft Office Outlook 2002 users who have applied Office XP Service Pack 1 or a later version and Microsoft Office Outlook Express 6 users who have applied Internet Explorer 6 Service Pack 1 or a later version can enable this setting and view e-mail messages that are not digitally signed or e-mail messages that are not encrypted in plain text only.

    Digitally signed e-mail messages or encrypted e-mail messages are not affected by the setting and may be read in their original formats. For more information about how to enable this setting in Outlook 2002, see Microsoft Knowledge Base Article 307594.

    For information about this setting in Outlook Express 6, see Microsoft Knowledge Base Article 291387.

    Impact of workaround. E-mail messages that are viewed in plain text format will not contain pictures, specialized fonts, animations, or other rich content. Additionally:

    • The changes are applied to the preview pane and to open messages.
    • Pictures become attachments so that they are not lost.
    • Because the message is still in Rich Text or HTML format in the store, the object model (custom code solutions) may behave unexpectedly.
  • Set Internet and Local intranet security zone settings to "High" to block ActiveX Controls and Active Scripting in these zones

    You can help protect against exploitation of this vulnerability by changing your settings for the Internet security zone to block ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

    To raise the browsing security level in Internet Explorer, perform the following steps:

    1. On the Internet Explorer Tools menu, click Internet Options.
    2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
    3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

    Note If no slider is visible, click Default Level, and then move the slider to High.

    Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

    Impact of workaround. There are side effects to blocking ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Blocking ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. If you do not want to block ActiveX Controls or Active Scripting for such sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to block ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect yourself from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, perform the following steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

  • Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

    You can help protect against exploitation of this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, perform the following steps:

    1. In Internet Explorer, click Internet Options on the Tools menu.
    2. Click the Security tab.
    3. Click Internet, and then click Custom Level.
    4. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    5. Click Local intranet, and then click Custom Level.
    6. Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
    7. Click OK two times to return to Internet Explorer.

    Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

    Impact of workaround. There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone".

    Add sites that you trust to the Internet Explorer Trusted sites zone

    After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

    To do this, perform the following steps:

    1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
    2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
    3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
    4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
    5. Repeat these steps for each site that you want to add to the zone.
    6. Click OK two times to accept the changes and return to Internet Explorer.

    Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

FAQ for Object Management Memory Corruption Vulnerability - CVE-2011-1345

What is the scope of the vulnerability? 
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability? 
When Internet Explorer attempts to access incorrectly initialized memory under certain conditions, it may corrupt memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could gain the same user rights as a logged-on user. If the user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

How could an attacker exploit the vulnerability? 
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. The attacker could also take advantage of compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability? 
This vulnerability requires that a user be logged on and visiting a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer for Windows Server 2003, Windows Server 2008, or Windows Server 2008 R2. Does this mitigate this vulnerability? 
Yes. By default, Internet Explorer on Windows Server 2003, Windows Server 2008, and Windows Server 2008 R2 runs in a restricted mode that is known as Enhanced Security Configuration. Enhanced Security Configuration is a group of preconfigured settings in Internet Explorer that can reduce the likelihood of a user or administrator downloading and running specially crafted Web content on a server. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone.

What does the update do? 
The update addresses the vulnerability by modifying the way that Internet Explorer handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
Yes. Microsoft is aware of limited, targeted attacks attempting to exploit the vulnerability.

Update Information

Security Central

Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.

Security updates are available from Microsoft Update and Windows Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."

Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, "MS07-036"), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.

Detection and Deployment Guidance

Microsoft provides detection and deployment guidance for security updates. This guidance contains recommendations and information that can help IT professionals understand how to use various tools for detection and deployment of security updates. For more information, see Microsoft Knowledge Base Article 961747.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.

The following table provides the MBSA detection summary for this security update.

Software MBSA
Windows XP Service Pack 3Yes
Windows XP Professional x64 Edition Service Pack 2Yes
Windows Server 2003 Service Pack 2Yes
Windows Server 2003 x64 Edition Service Pack 2Yes
Windows Server 2003 with SP2 for Itanium-based SystemsYes
Windows Vista Service Pack 1 and Windows Vista Service Pack 2Yes
Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2Yes
Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2Yes
Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2Yes
Windows Server 2008 for Itanium-based Systems and Windows Server 2008 for Itanium-based Systems Service Pack 2Yes
Windows 7 for 32-bit Systems and Windows 7 for 32-bit Systems Service Pack 1Yes
Windows 7 for x64-based Systems and Windows 7 for x64-based Systems Service Pack 1Yes
Windows Server 2008 R2 for x64-based Systems and Windows Server 2008 R2 for x64-based Systems Service Pack 1Yes
Windows Server 2008 R2 for Itanium-based Systems and Windows Server 2008 R2 for Itanium-based Systems Service Pack 1Yes

Note For customers using legacy software not supported by the latest release of MBSA, Microsoft Update, and Windows Server Update Services, please visit Microsoft Baseline Security Analyzer and reference the Legacy Product Support section on how to create comprehensive security update detection with legacy tools.

Windows Server Update Services

Windows Server Update Services (WSUS) enables information technology administrators to deploy the latest Microsoft product updates to computers that are running the Windows operating system. For more information about how to deploy security updates using Windows Server Update Services, see the TechNet article, Windows Server Update Services.

Systems Management Server

The following table provides the SMS detection and deployment summary for this security update.

SoftwareSMS 2.0SMS 2003 with SUITSMS 2003 with ITMUConfiguration Manager 2007
Windows XP Service Pack 3Yes*Yes*YesYes
Windows XP Professional x64 Edition Service Pack 2NoNoYesYes
Windows Server 2003 Service Pack 2Yes*Yes*YesYes
Windows Server 2003 x64 Edition Service Pack 2NoNoYesYes
Windows Server 2003 with SP2 for Itanium-based SystemsNoNoYesYes
Windows Vista Service Pack 1 and Windows Vista Service Pack 2NoNoYesYes
Windows Vista x64 Edition Service Pack 1 and Windows Vista x64 Edition Service Pack 2NoNoYesYes
Windows Server 2008 for 32-bit Systems and Windows Server 2008 for 32-bit Systems Service Pack 2NoNoYesYes
Windows Server 2008 for x64-based Systems and Windows Server 2008 for x64-based Systems Service Pack 2NoNoYesYes
Windows Server 2008 for Itanium-based Systems and Windows Server 2008 for Itanium-based Systems Service Pack 2NoNoYesYes
Windows 7 for 32-bit Systems and Windows 7 for 32-bit Systems Service Pack 1NoNoYesYes
Windows 7 for x64-based Systems and Windows 7 for x64-based Systems Service Pack 1NoNoYesYes
Windows Server 2008 R2 for x64-based Systems and Windows Server 2008 R2 for x64-based Systems Service Pack 1NoNoYesYes
Windows Server 2008 R2 for Itanium-based Systems and Windows Server 2008 R2 for Itanium-based Systems Service Pack 1NoNoYesYes

*Internet Explorer 6 only. For more information, see Microsoft Knowledge Base Article 924178.

For SMS 2.0 and SMS 2003, the Security Update Inventory Tool (SUIT) can be used by SMS to detect security updates. See also Downloads for Systems Management Server 2.0.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. For more information about SMS scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.

System Center Configuration Manager 2007 uses WSUS 3.0 for detection of updates. For more information about Configuration Manager 2007 Software Update Management, visit System Center Configuration Manager 2007.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Update Compatibility Evaluator and Application Compatibility Toolkit

Updates often write to the same files and registry settings required for your applications to run. This can trigger incompatibilities and increase the time it takes to deploy security updates. You can streamline testing and validating Windows updates against installed applications with the Update Compatibility Evaluator components included with Application Compatibility Toolkit.

The Application Compatibility Toolkit (ACT) contains the necessary tools and documentation to evaluate and mitigate application compatibility issues before deploying Microsoft Windows Vista, a Windows Update, a Microsoft Security Update, or a new version of Windows Internet Explorer in your environment.

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

Windows XP (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionInternet Explorer 6 for all supported 32-bit editions of Windows XP:
WindowsXP-KB2497640-x86-ENU.exe /quiet
Internet Explorer 6 for all supported x64-based editions of Windows XP:
WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /quiet
Internet Explorer 7 for all supported 32-bit editions of Windows XP:
IE7-WindowsXP-KB2497640-x86-ENU.exe /quiet
Internet Explorer 7 for all supported x64-based editions of Windows XP:
IE7-WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /quiet
Internet Explorer 8 for all supported 32-bit editions of Windows XP:
IE8-WindowsXP-KB2497640-x86-ENU.exe /quiet
Internet Explorer 8 for all supported x64-based editions of Windows XP:
IE8-WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /quiet
Installing without restartingInternet Explorer 6 for all supported 32-bit editions of Windows XP:
WindowsXP-KB2497640-x86-ENU.exe /norestart
Internet Explorer 6 for all supported x64-based editions of Windows XP:
WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /norestart
Internet Explorer 7 for all supported 32-bit editions of Windows XP:
IE7-WindowsXP-KB2497640-x86-ENU.exe /norestart
Internet Explorer 7 for all supported x64-based editions of Windows XP:
IE7-WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /norestart
Internet Explorer 8 for all supported 32-bit editions of Windows XP:
IE8-WindowsXP-KB2497640-x86-ENU.exe /norestart
Internet Explorer 8 for all supported x64-based editions of Windows XP:
IE8-WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /norestart
Update log fileInternet Explorer 6 for all supported editions of Windows XP:
KB2497640.log
Internet Explorer 7 for all supported editions of Windows XP:
KB2497640-IE7.log
Internet Explorer 8 for all supported editions of Windows XP:
KB2497640-IE8.log
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update
HotpatchingNot applicable
Removal InformationInternet Explorer 6 for all supported editions of Windows XP:

Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\$NTUninstallKB2497640$\Spuninst folder

Internet Explorer 7 for all supported editions of Windows XP:
Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\ie7updates\KB2497640-IE7\spuninst folder
Internet Explorer 8 for all supported editions of Windows XP:
Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\ie8updates\KB2497640-IE8\spuninst folder
File InformationSee Microsoft Knowledge Base Article 2497640
Registry Key VerificationInternet Explorer 6 for all supported 32-bit editions of Windows XP:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP4\KB2497640\Filelist
Internet Explorer 6 for all supported x64-based editions of Windows XP:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP3\KB2497640\Filelist
Internet Explorer 7 for all supported 32-bit editions of Windows XP:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP0\KB2497640-IE7\Filelist
Internet Explorer 7 for all supported x64-based editions of Windows XP:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP0\KB2497640-IE7\Filelist
Internet Explorer 8 for all supported 32-bit editions of Windows XP:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP0\KB2497640-IE8\Filelist
Internet Explorer 8 for all supported x64-based editions of Windows XP:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP0\KB2497640-IE8\Filelist

Note For supported versions of Windows XP Professional x64 Edition, this security update is the same as the security update for supported versions of Windows Server 2003 x64 Edition.

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the installer, see Microsoft Knowledge Base Article 832475.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoemOverwrites OEM files without prompting.
/nobackupDoes not back up files needed for uninstall.
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.
/integrate:pathIntegrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path]Extracts files without starting the Setup program.
/EREnables extended error reporting.
/verboseEnables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update supports the following setup switches.

Supported Spuninst.exe Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section.

    These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files.

Windows Server 2003 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionInternet Explorer 6 for all supported 32-bit editions of Windows Server 2003:
WindowsServer2003-KB2497640-x86-ENU.exe /quiet
Internet Explorer 6 for all supported x64-based editions of Windows Server 2003:
WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /quiet
Internet Explorer 6 for all supported Itanium-based editions of Windows Server 2003:
WindowsServer2003-KB2497640-ia64-ENU.exe /quiet
Internet Explorer 7 for all supported 32-bit editions of Windows Server 2003:
IE7-WindowsServer2003-KB2497640-x86-ENU.exe /quiet
Internet Explorer 7 for all supported x64-based editions of Windows Server 2003:
IE7-WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /quiet
Internet Explorer 7 for all supported Itanium-based editions of Windows Server 2003:
IE7-WindowsServer2003-KB2497640-ia64-ENU.exe /quiet
Internet Explorer 8 for all supported 32-bit editions of Windows Server 2003:
IE8-WindowsServer2003-KB2497640-x86-ENU.exe /quiet
Internet Explorer 8 for all supported x64-based editions of Windows Server 2003:
IE8-WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /quiet
Installing without restartingInternet Explorer 6 for all supported 32-bit editions of Windows Server 2003:
WindowsServer2003-KB2497640-x86-ENU.exe /norestart
Internet Explorer 6 for all supported x64-based editions of Windows Server 2003:
WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /norestart
Internet Explorer 6 for all supported Itanium-based editions of Windows Server 2003:
WindowsServer2003-KB2497640-ia64-ENU.exe /norestart
Internet Explorer 7 for all supported 32-bit editions of Windows Server 2003:
IE7-WindowsServer2003-KB2497640-x86-ENU.exe /norestart
Internet Explorer 7 for all supported x64-based editions of Windows Server 2003:
IE7-WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /norestart
Internet Explorer 7 for all supported Itanium-based editions of Windows Server 2003:
IE7-WindowsServer2003-KB2497640-ia64-ENU.exe /norestart
Internet Explorer 8 for all supported 32-bit editions of Windows Server 2003:
IE8-WindowsServer2003-KB2497640-x86-ENU.exe /norestart
Internet Explorer 8 for all supported x64-based editions of Windows Server 2003:
IE8-WindowsServer2003.WindowsXP-KB2497640-x64-ENU.exe /norestart
Update log fileInternet Explorer 6 for all supported 32-bit editions, x64-based editions, and Itanium-based editions of Windows Server 2003:
KB2497640.log
Internet Explorer 7 for all supported 32-bit editions, x64-based editions, and Itanium-based editions of Windows Server 2003:
KB2497640-IE7.log
Internet Explorer 8 for all supported 32-bit editions, x64-based editions, and Itanium-based of Windows Server 2003:
KB2497640-IE8.log
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update.
HotPatchingThis security update does not support HotPatching. For more information about HotPatching, see Microsoft Knowledge Base Article 897341.
Removal InformationInternet Explorer 6 for all supported 32-bit editions, x64-based editions, and Itanium-based editions of Windows Server 2003:
Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the Use the Spuninst.exe utility, located in the %Windir%\$NTUninstallKB2497640$\Spuninst folder
Internet Explorer 7 for all supported 32-bit editions, x64-based editions, and Itanium-based editions of Windows Server 2003:
Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\ie7updates\KB2497640-IE7\spuninst folder
Internet Explorer 8 for all supported 32-bit editions and x64-based editions of Windows Server 2003:
Use Add or Remove Programs tool in Control Panel or the Spuninst.exe utility located in the %Windir%\ie8updates\KB2497640-IE8\spuninst folder
File InformationSee Microsoft Knowledge Base Article 2497640
Registry Key VerificationInternet Explorer 6 for all supported 32-bit editions, x64-based editions, and Itanium-based editions of Windows Server 2003:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP3\KB2497640\Filelist
Internet Explorer 7 for all supported 32-bit editions, x64-based editions, and Itanium-based editions of Windows Server 2003:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP0\KB2497640-IE7\Filelist
Internet Explorer 8 for all supported 32-bit editions and x64-based editions of Windows Server 2003:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP0\KB2497640-IE8\Filelist

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the installer, see Microsoft Knowledge Base Article 832475.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoemOverwrites OEM files without prompting.
/nobackupDoes not back up files needed for uninstall.
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.
/integrate:pathIntegrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path]Extracts files without starting the Setup program.
/EREnables extended error reporting.
/verboseEnables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

This security update supports the following setup switches.

Supported Spuninst.exe Switches
SwitchDescription
/helpDisplays the command-line options.
Setup Modes
/passiveUnattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quietQuiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestartDoes not restart when installation has completed.
/forcerestartRestarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestartDisplays a dialog box prompting the local user to allow a restart.
Special Options
/forceappscloseForces other programs to close when the computer shuts down.
/log:pathAllows the redirection of installation log files.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the registry keys listed in the Reference Table in this section.

    These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly when an administrator or an OEM integrates or slipstreams this security update into the Windows installation source files.

Windows Vista (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionInternet Explorer 7 in all supported 32-bit editions of Windows Vista:
Windows6.0-KB2497640-x86.msu /quiet
Internet Explorer 7 in all supported x64-based editions of Windows Vista:
Windows6.0-KB2497640-x64.msu /quiet
Internet Explorer 8 in all supported 32-bit editions of Windows Vista:
IE8-Windows6.0-KB2497640-x86.msu /quiet
Internet Explorer 8 in all supported x64-based editions of Windows Vista:
IE8-Windows6.0-KB2497640-x64.msu /quiet
Installing without restartingInternet Explorer 7 in all supported 32-bit editions of Windows Vista:
Windows6.0-KB2497640-x86.msu /quiet /norestart
Internet Explorer 7 in all supported x64-based editions of Windows Vista:
Windows6.0-KB2497640-x64.msu /quiet /norestart
Internet Explorer 8 in all supported 32-bit editions of Windows Vista:
IE8-Windows6.0-KB2497640-x86.msu /quiet /norestart
Internet Explorer 8 in all supported x64-based editions of Windows Vista:
IE8-Windows6.0-KB2497640-x64.msu /quiet /norestart
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update
HotpatchingNot applicable
Removal InformationWUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.
File InformationSee Microsoft Knowledge Base Article 2497640
Registry Key VerificationNote A registry key does not exist to validate the presence of this update.

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/?, /h, /helpDisplays help on supported switches.
/quietSuppresses the display of status or error messages.
/norestartWhen combined with /quiet, the system will not be restarted after installation even if a restart is required to complete installation.

Note For more information about the wusa.exe installer, see Microsoft Knowledge Base Article 934307.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start and then enter an update file name in the Start Search box.
    2. When the file appears under Programs, right-click the file name and click Properties.
    3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
    5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Windows Server 2008 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionInternet Explorer 7 in all supported 32-bit editions of Windows Server 2008:
Windows6.0-KB2497640-x86.msu /quiet
Internet Explorer 7 in all supported x64-based editions of Windows Server 2008:
Windows6.0-KB2497640-x64.msu /quiet
Internet Explorer 7 in all supported Itanium-based editions of Windows Server 2008:
Windows6.0-KB2497640-ia64.msu /quiet
Internet Explorer 8 in all supported 32-bit editions of Windows Server 2008:
IE8-Windows6.0-KB2497640-x86.msu /quiet
Internet Explorer 8 in all supported x64-based editions of Windows Server 2008:
IE8-Windows6.0-KB2497640-x64.msu /quiet
Installing without restartingInternet Explorer 7 in all supported 32-bit editions of Windows Server 2008:
Windows6.0-KB2497640-x86.msu /quiet /norestart
Internet Explorer 7 in all supported x64-based editions of Windows Server 2008:
Windows6.0-KB2497640-x64.msu /quiet /norestart
Internet Explorer 7 in all supported Itanium-based editions of Windows Server 2008:
Windows6.0-KB2497640-ia64.msu /quiet /norestart
Internet Explorer 8 in all supported 32-bit editions of Windows Server 2008:
IE8-Windows6.0-KB2497640-x86.msu /quiet /norestart
Internet Explorer 8 in all supported x64-based editions of Windows Server 2008:
IE8-Windows6.0-KB2497640-x64.msu /quiet /norestart
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update.
HotPatchingNot applicable.
Removal InformationWUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.
File InformationSee Microsoft Knowledge Base Article 2497640
Registry Key VerificationNote A registry key does not exist to validate the presence of this update.

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/?, /h, /helpDisplays help on supported switches.
/quietSuppresses the display of status or error messages.
/norestartWhen combined with /quiet, the system will not be restarted after installation even if a restart is required to complete installation.

Note For more information about the wusa.exe installer, see Microsoft Knowledge Base Article 934307.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start and then enter an update file name in the Start Search box.
    2. When the file appears under Programs, right-click the file name and click Properties.
    3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
    5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Windows 7 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionInternet Explorer 8 in all supported 32-bit editions of Windows 7:
Windows6.1-KB2497640-x86.msu /quiet
Internet Explorer 8 in all supported x64-based editions of Windows 7:
Windows6.1-KB2497640-x64.msu /quiet
Installing without restartingInternet Explorer 8 in all supported 32-bit editions of Windows 7:
Windows6.1-KB2497640-x86.msu /quiet /norestart
Internet Explorer 8 in all supported x64-based editions of Windows 7:
Windows6.1-KB2497640-x64.msu /quiet /norestart
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update
HotpatchingNot applicable
Removal InformationTo uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.
File InformationSee Microsoft Knowledge Base Article 2497640
Registry Key VerificationNote A registry key does not exist to validate the presence of this update.

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/?, /h, /helpDisplays help on supported switches.
/quietSuppresses the display of status or error messages.
/norestartWhen combined with /quiet, the system will not be restarted after installation even if a restart is required to complete installation.
/warnrestart:<seconds>When combined with /quiet, the installer will warn the user before initiating restart.
/promptrestartWhen combined with /quiet, the installer will prompt before initiating restart.
/forcerestartWhen combined with /quiet, the installer will forcefully close applications and initiate restart.
/log:<file name>Enables logging to specified file.
/extract:<destination>Extracts the package contents to the destination folder.
/uninstall /kb:<KB Number>Uninstalls the security update.

Note For more information about the wusa.exe installer, see "Windows Update Stand-alone Installer" in the TechNet article, Miscellaneous Changes in Windows 7.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start and then enter an update file name in the Search box.
    2. When the file appears under Programs, right-click the file name and click Properties.
    3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
    5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Windows Server 2008 R2 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service PacksThe update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user interventionInternet Explorer 8 in all supported x64-based editions of Windows Server 2008 R2:
Windows6.1-KB2497640-x64.msu /quiet
Internet Explorer 8 in all supported Itanium-based editions of Windows Server 2008 R2:
Windows6.1-KB2497640-ia64.msu /quiet
Installing without restartingInternet Explorer 8 in all supported x64-based editions of Windows Server 2008 R2:
Windows6.1-KB2497640-x64.msu /quiet /norestart
Internet Explorer 8 in all supported Itanium-based editions of Windows Server 2008 R2:
Windows6.1-KB2497640-ia64.msu /quiet /norestart
Further informationSee the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required?Yes, you must restart your system after you apply this security update
HotpatchingNot applicable
Removal InformationTo uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.
File InformationSee Microsoft Knowledge Base Article 2497640
Registry Key VerificationNote A registry key does not exist to validate the presence of this update.

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches
SwitchDescription
/?, /h, /helpDisplays help on supported switches.
/quietSuppresses the display of status or error messages.
/norestartWhen combined with /quiet, the system will not be restarted after installation even if a restart is required to complete installation.
/warnrestart:<seconds>When combined with /quiet, the installer will warn the user before initiating restart.
/promptrestartWhen combined with /quiet, the installer will prompt before initiating restart.
/forcerestartWhen combined with /quiet, the installer will forcefully close applications and initiate restart.
/log:<file name>Enables logging to specified file.
/extract:<destination>Extracts the package contents to the destination folder.
/uninstall /kb:<KB Number>Uninstalls the security update.

Note For more information about the wusa.exe installer, see "Windows Update Stand-alone Installer" in the TechNet article, Miscellaneous Changes in Windows 7.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start and then enter an update file name in the Start Search box.
    2. When the file appears under Programs, right-click the file name and click Properties.
    3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.

      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
    5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

  • An anonymous researcher, working with VeriSign iDefense Labs, for reporting the Layouts Handling Memory Corruption Vulnerability (CVE-2011-0094)
  • MITRE for working with us on the Layouts Handling Memory Corruption Vulnerability (CVE-2011-0094)
  • Michal Zalewski of Google Inc. for working with us on the MSHTML Memory Corruption Vulnerability (CVE-2011-0346)
  • David Bloom of Google Inc. for reporting the Frame Tag Information Disclosure Vulnerability (CVE-2011-1244)
  • David Bloom of Google Inc. for reporting the Javascript Information Disclosure Vulnerability (CVE-2011-1245)
  • Stephen Fewer of Harmony Security, working with TippingPoint's Zero Day Initiative, for reporting the Object Management Memory Corruption Vulnerability (CVE-2011-1345)

Microsoft Active Protections Program (MAPP)

To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please visit the active protections Web sites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.

Support

  • Customers in the U.S. and Canada can receive technical support from Security Support or 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates. For more information about available support options, see Microsoft Help and Support.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (April 12, 2011): Bulletin published.
  • V2.0 (May 16, 2011): Bulletin rereleased to reoffer the update for Internet Explorer 7 on supported editions of Windows XP and Windows Server 2003. This is a detection change only. There were no changes to the binaries. Only affected customers will be offered the update. Customers who have installed the update manually and customers running configurations not targeted by the change to detection logic do not need to take any action.

Built at 2014-04-02T23:59:26Z-07:00

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.