TechNet
Exporteren (0) Afdrukken
Alles uitvouwen
EN
Deze inhoud is niet beschikbaar in uw taal, maar wel in het Engels.

Set-OwaVirtualDirectory

 

Applies to: Exchange Server 2016

This cmdlet is available only in on-premises Exchange Server 2016.

Use the Set-OwaVirtualDirectory cmdlet to modify existingOutlook on the web virtual directories that are used in Internet Information Services (IIS) on Exchange servers.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Set-OwaVirtualDirectory -Identity <VirtualDirectoryIdParameter> [-ActionForUnknownFileAndMIMETypes <Allow | ForceSave | Block>] [-ActiveSyncIntegrationEnabled <$true | $false>] [-AdfsAuthentication <$true | $false>] [-AllAddressListsEnabled <$true | $false>] [-AllowCopyContactsToDeviceAddressBook <$true | $false>] [-AllowedFileTypes <MultiValuedProperty>] [-AllowedMimeTypes <MultiValuedProperty>] [-AllowOfflineOn <PrivateComputersOnly | NoComputers | AllComputers>] [-AnonymousFeaturesEnabled <$true | $false>] [-BasicAuthentication <$true | $false>] [-BlockedFileTypes <MultiValuedProperty>] [-BlockedMimeTypes <MultiValuedProperty>] [-BoxAttachmentsEnabled <$true | $false>] [-CalendarEnabled <$true | $false>] [-ChangePasswordEnabled <$true | $false>] [-ClientAuthCleanupLevel <High | Low>] [-Confirm [<SwitchParameter>]] [-ContactsEnabled <$true | $false>] [-DefaultClientLanguage <Int32>] [-DefaultDomain <String>] [-DefaultTheme <String>] [-DelegateAccessEnabled <$true | $false>] [-DigestAuthentication <$true | $false>] [-DirectFileAccessOnPrivateComputersEnabled <$true | $false>] [-DirectFileAccessOnPublicComputersEnabled <$true | $false>] [-DisplayPhotosEnabled <$true | $false>] [-DomainController <Fqdn>] [-DropboxAttachmentsEnabled <$true | $false>] [-Exchange2003Url <Uri>] [-ExchwebProxyDestination <NotSpecified | MailboxServer | PublicFolderServer>] [-ExplicitLogonEnabled <$true | $false>] [-ExtendedProtectionFlags <MultiValuedProperty>] [-ExtendedProtectionSPNList <MultiValuedProperty>] [-ExtendedProtectionTokenChecking <None | Allow | Require>] [-ExternalAuthenticationMethods <MultiValuedProperty>] [-ExternalSPMySiteHostURL <String>] [-ExternalUrl <Uri>] [-FailbackUrl <Uri>] [-FilterWebBeaconsAndHtmlForms <UserFilterChoice | ForceFilter | DisableFilter>] [-ForceSaveAttachmentFilteringEnabled <$true | $false>] [-ForceSaveFileTypes <MultiValuedProperty>] [-ForceSaveMimeTypes <MultiValuedProperty>] [-ForceWacViewingFirstOnPrivateComputers <$true | $false>] [-ForceWacViewingFirstOnPublicComputers <$true | $false>] [-FormsAuthentication <$true | $false>] [-GlobalAddressListEnabled <$true | $false>] [-GzipLevel <Off | Low | High | Error>] [-InstantMessagingCertificateThumbprint <String>] [-InstantMessagingEnabled <$true | $false>] [-InstantMessagingServerName <String>] [-InstantMessagingType <None | Ocs | Msn>] [-IntegratedFeaturesEnabled <$true | $false>] [-InternalSPMySiteHostURL <String>] [-InternalUrl <Uri>] [-IRMEnabled <$true | $false>] [-IsPublic <$true | $false>] [-JournalEnabled <$true | $false>] [-JunkEmailEnabled <$true | $false>] [-LogonAndErrorLanguage <Int32>] [-LogonFormat <FullDomain | PrincipalName | UserName>] [-LogonPageLightSelectionEnabled <$true | $false>] [-LogonPagePublicPrivateSelectionEnabled <$true | $false>] [-NotesEnabled <$true | $false>] [-NotificationInterval <Int32>] [-OAuthAuthentication <$true | $false>] [-OrganizationEnabled <$true | $false>] [-OutboundCharset <AlwaysUTF8 | AutoDetect | UserLanguageChoice>] [-OWALightEnabled <$true | $false>] [-PremiumClientEnabled <$true | $false>] [-PublicFoldersEnabled <$true | $false>] [-RecoverDeletedItemsEnabled <$true | $false>] [-RedirectToOptimalOWAServer <$true | $false>] [-RemindersAndNotificationsEnabled <$true | $false>] [-RemoteDocumentsActionForUnknownServers <Allow | Block>] [-RemoteDocumentsAllowedServers <MultiValuedProperty>] [-RemoteDocumentsBlockedServers <MultiValuedProperty>] [-RemoteDocumentsInternalDomainSuffixList <MultiValuedProperty>] [-ReportJunkEmailEnabled <$true | $false>] [-RulesEnabled <$true | $false>] [-SearchFoldersEnabled <$true | $false>] [-SetPhotoEnabled <$true | $false>] [-SetPhotoURL <String>] [-SignaturesEnabled <$true | $false>] [-SilverlightEnabled <$true | $false>] [-SMimeEnabled <$true | $false>] [-SpellCheckerEnabled <$true | $false>] [-TasksEnabled <$true | $false>] [-TextMessagingEnabled <$true | $false>] [-ThemeSelectionEnabled <$true | $false>] [-UMIntegrationEnabled <$true | $false>] [-UNCAccessOnPrivateComputersEnabled <$true | $false>] [-UNCAccessOnPublicComputersEnabled <$true | $false>] [-UseGB18030 <$true | $false>] [-UseISO885915 <$true | $false>] [-UserContextTimeout <Int32>] [-VirtualDirectoryType <NotSpecified | Mailboxes | PublicFolders | Exchweb | Exadmin>] [-WacEditingEnabled <$true | $false>] [-WacViewingOnPrivateComputersEnabled <$true | $false>] [-WacViewingOnPublicComputersEnabled <$true | $false>] [-WebPartsFrameOptionsType <Deny | AllowFrom | None | SameOrigin>] [-WhatIf [<SwitchParameter>]] [-WindowsAuthentication <$true | $false>] [-WSSAccessOnPrivateComputersEnabled <$true | $false>] [-WSSAccessOnPublicComputersEnabled <$true | $false>]

This example sets the DirectFileAccessOnPublicComputersEnabled parameter to $false on the Outlook on the web virtual directory owa on the default Internet Information Services (IIS) website on the Exchange server Contoso.

Set-OwaVirtualDirectory -Identity "Contoso\owa (default Web site)" -DirectFileAccessOnPublicComputersEnabled $false

This example sets the ActionForUnknownFileAndMIMETypes parameter to Block on the default Outlook on the web virtual directory owa on the server Contoso.

Set-OwaVirtualDirectory -Identity "Contoso\owa (default Web site)" -ActionForUnknownFileAndMIMETypes Block

Before you run the Set-OwaVirtualDirectory cmdlet, consider the following items:

  • You must have Write access to virtual directory objects in Active Directory. If you don't have the necessary permissions and you try to run the Set-OwaVirtualDirectory cmdlet on the Active Directory virtual directory object, the cmdlet fails.

  • You must have Write access to virtual directory objects in the metabase for some properties, such as Authentication and GZip. If you don't have the necessary permissions to run the Set-OwaVirtualDirectory cmdlet on a metabase virtual directory object or on a parameter that writes to the metabase, the cmdlet fails.

  • Verify that the data source can be read. Depending on the properties that you want to set on an Outlook on the web virtual directory, you may want to run the cmdlet in a test environment on the Outlook on the web virtual directory object in Active Directory, the metabase, or both.

  • You can run the Set-OwaVirtualDirectory cmdlet on any server that has the Exchange Server administration tools installed.

  • Several parameters for the Set-OwaVirtualDirectory cmdlet can contain more than one value. These are known as multivalued properties. Make sure that you modify multivalued properties correctly. For information, see Modifying multivalued properties.

  • Many of the Outlook on the web virtual directory settings require you to run the IISReset /noforce command before the change takes effect. For example, when you enable or disable forms-based authentication, or when you enable or disable the Private computer option on the sign-in page.

  • To switch from forms-based authentication to Basic authentication, you must first disable forms-based authentication, and then as a separate task, enable Basic authentication. You can't disable forms-based authentication and enable Basic authentication in a single task.

You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Outlook on the web virtual directories" entry in the Clients and mobile devices permissions topic.

 

Parameter Required Type Description

Identity

Required

Microsoft.Exchange.Configuration.Tasks.VirtualDirectoryIdParameter

The Identity parameter specifies the Outlook on the web virtual directory that you want to modify.

You can use any value that uniquely identifies the virtual directory. For example:

  • Name or <Server>\Name

  • Distinguished name (DN)

  • GUID

The Name value uses the syntax "<VirtualDirectoryName> (<WebsiteName>)" from the properties of the virtual directory. You can specify the wildcard character (*) instead of the default website by using the syntax <VirtualDirectoryName>*.

ActionForUnknownFileAndMIMETypes

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.AttachmentBlockingActions

The ActionForUnknownFileAndMIMETypes parameter specifies how to handle files that aren't included in other File Access Management lists.

The following values are valid for this parameter:

  • Allow

  • ForceSave

  • Block

ActiveSyncIntegrationEnabled

Optional

System.Boolean

The ActiveSyncIntegrationEnabled parameter disables MicrosoftExchange ActiveSync on the Outlook on the webOptions page.

Valid input for this parameter is $true or $false. The default value is $true.

AdfsAuthentication

Optional

System.Boolean

The AdfsAuthentication parameter enables or disables Active Directory Federation Services (ADFS) authentication on the Outlook on the web virtual directory. Valid input for this parameter is $true or $false. The default value is $false.

The ADFS authentication settings for Set-OwaVirtualDirectory and Set-EcpVirtualDirectory are related. You need to set the AdfsAuthentication parameter on Set-EcpVirtualDirectory to $true before you can set the AdfsAuthentication parameter on Set-OwaVirtualDirectory to $true. Likewise, you need to set the AdfsAuthentication parameter on Set-OwaVirtualDirectory to $false before you can set the AdfsAuthentication parameter on Set-EcpVirtualDirectory to $false.

AllAddressListsEnabled

Optional

System.Boolean

The AllAddressListsEnabled parameter specifies which address lists are available to the user.

You can use one of the following values:

  • If set to $true, users can view all address lists.

  • If set to $false, users can view only the global address list (GAL).

The default value is $true.

AllowCopyContactsToDeviceAddressBook

Optional

System.Boolean

The AllowCopyContactsToDeviceAddressBook parameter specifies if users can copy the contents of their Contacts folder to a mobile device's native address book when using OWA for Devices.

Valid input for this parameter is $true or $false. The default value is $true.

AllowedFileTypes

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The AllowedFileTypes parameter specifies the extensions of file types that the user can save locally and view from a web browser. If the same extensions are in multiple settings lists, the most secure setting overrides the less secure settings.

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

AllowedMimeTypes

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The AllowedMimeTypes parameter specifies extensions of MIME attachments that users can save locally and view from a web browser. If the same extensions are in multiple settings lists, the most secure setting overrides the less secure settings.

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

AllowOfflineOn

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.AllowOfflineOnEnum

The AllowOfflineOn parameter specifies which computers can use Outlook on the web in offline mode. The possible values are:

  • NoComputers

  • AllComputers

  • PrivateComputersOnly

The default value is AllComputers.

By default, Outlook on the web in Exchange 2016 assumes you are connecting from a private computer. In order to show the Private computer option at sign-in, you set the LogonPagePublicPrivateSelectionEnabled parameter to the value $true.

If the feature is enabled and users are using a supported browser, they can use Outlook on the web in offline mode. Users can turn the feature on or off in Outlook on the web. To turn the feature on, click the gear icon and then select Stop using offline. To turn the feature off, click the gear icon and then select Use mail offline. The supported browsers are Microsoft Internet Explorer 10, Safari 4, or Chrome 16. For more information, see Using Outlook Web App offline.

AnonymousFeaturesEnabled

Optional

System.Boolean

The AnonymousFeaturesEnabled parameter specifies whether you want to allow Outlook on the web users that are logged on anonymously to access specific features. For example, if this value is set to $true, users logged on using anonymous authentication can view and change meeting content. This parameter is set to $true by default.

BasicAuthentication

Optional

System.Boolean

The BasicAuthentication parameter specifies whether Basic authentication is enabled on the virtual directory. Valid values are:

  • $true   Basic authentication is enabled. This is the default value.

  • $false   Basic authentication is disabled.

This parameter can be used with the FormsAuthentication parameter or with the DigestAuthentication and WindowsAuthentication parameters.

BlockedFileTypes

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The BlockedFileTypes parameter specifies a list of extensions of attachments that are blocked. Attachments that contain these blocked extensions can't be saved locally or viewed from a web browser.

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

BlockedMimeTypes

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The BlockedMimeTypes parameter specifies a list of MIME extensions of attachments that are blocked. Attachments that contain these blocked MIME extensions can't be saved locally or viewed from a web browser.

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

BoxAttachmentsEnabled

Optional

System.Boolean

PARAMVALUE: $true | $false

CalendarEnabled

Optional

System.Boolean

The CalendarEnabled parameter specifies whether to enable the calendar for users.

Valid input for this parameter is $true or $false. The default value is $true.

ChangePasswordEnabled

Optional

System.Boolean

The ChangePasswordEnabled parameter specifies whether users can change their passwords from inside Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

ClientAuthCleanupLevel

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.ClientAuthCleanupLevels

The ClientAuthCleanupLevel parameter specifies how much of the cache is cleared when the user logs off in Outlook on the web. This parameter doesn't apply to the light version of Outlook on the web.

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.

  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

ContactsEnabled

Optional

System.Boolean

The ContactsEnabled parameter specifies whether Contacts are enabled for users.

Valid input for this parameter is $true or $false. The default value is $true.

DefaultClientLanguage

Optional

System.Int32

This parameter has been deprecated and is no longer used.

DefaultDomain

Optional

System.String

The DefaultDomain parameter specifies which domain to use when the LogonFormat parameter is set to UserName.

DefaultTheme

Optional

System.String

The DefaultTheme parameter specifies the default theme used by Outlook on the web when the user hasn't selected a theme.

DelegateAccessEnabled

Optional

System.Boolean

The DelegateAccessEnabled parameter specifies whether delegates can use Outlook on the web to open folders, which they have delegate access to, through this virtual directory.

Valid input for this parameter is $true or $false. The default value is $true.

DigestAuthentication

Optional

System.Boolean

The DigestAuthentication parameter specifies whether Digest authentication is enabled on the virtual directory. Valid values are:

  • $true   Digest authentication is enabled.

  • $false   Digest authentication is disabled. This is the default value.

This parameter can't be used with the FormsAuthentication parameter.

DirectFileAccessOnPrivateComputersEnabled

Optional

System.Boolean

The DirectFileAccessOnPrivateComputersEnabled parameter specifies the left-click options on attachments. If this parameter is set to $true, Open is an available option. If it's set to $false, the Open option is disabled. The default value is $true.

By default, Outlook on the web in Exchange 2016 assumes you are connecting from a private computer. In order to show the Private computer option at sign-in, you set the LogonPagePublicPrivateSelectionEnabled parameter to the value $true.

DirectFileAccessOnPublicComputersEnabled

Optional

System.Boolean

The DirectFileAccessOnPublicComputersEnabled parameter specifies the left-click options on attachments when a user logs on after unchecking the Private computer option. If this parameter is set to $true, Open is an available option. If it's set to $false, the Open option is disabled. The default value is $true.

By default, Outlook on the web in Exchange 2016 assumes you are connecting from a private computer. Therefore, this parameter is meaningful only if you set the LogonPagePublicPrivateSelectionEnabled parameter to the value $true. This allows you to uncheck the Private computer option at sign-in, which indicates you are connecting from a public computer.

DisplayPhotosEnabled

Optional

System.Boolean

The DisplayPhotosEnabled parameter specifies whether users see sender photos in Outlook on the web. The possible values for this parameter are $true or $false. The default value is $true.

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

DropboxAttachmentsEnabled

Optional

System.Boolean

PARAMVALUE: $true | $false

Exchange2003Url

Optional

System.Uri

This parameter has been deprecated and is no longer used.

ExchwebProxyDestination

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.ExchwebProxyDestinations

This parameter has been deprecated and is no longer used.

ExplicitLogonEnabled

Optional

System.Boolean

The ExplicitLogonEnabled parameter specifies whether to allow a user to open someone else's mailbox in Outlook on the web. If this parameter is set to $true, it allows a user to open someone else's mailbox in Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

ExtendedProtectionFlags

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExtendedProtectionFlags parameter specifies custom settings for Extended Protection for Authentication on the virtual directory. Valid values are:

  • None   This is the default setting.

  • AllowDotlessSPN   Required if you want to use Service Principal Name (SPN) values that don't contain FQDNs (for example, HTTP/ContosoMail instead of HTTP/mail.contoso.com). You specify SPNs with the ExtendedProtectionSPNList parameter. This setting makes Extended Protection for Authentication less secure because dotless certificates aren't unique, so it isn't possible to ensure that the client-to-proxy connection was established over a secure channel.

  • NoServiceNameCheck   The SPN list isn't checked to validate a channel binding token. This setting makes Extended Protection for Authentication less secure. We generally don't recommend this setting.

  • Proxy   A proxy server is responsible for terminating the SSL channel. To use this setting, you need to register an SPN by using the ExtendedProtectionSPNList parameter.

  • ProxyCoHosting   HTTP and HTTPS traffic may be accessing the virtual directory, and a proxy server is located between at least some of the clients and the Client Access services on the Exchange server.

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

ExtendedProtectionSPNList

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExtendedProtectionSPNList parameter specifies a list of valid Service Principal Names (SPNs) if you're using Extended Protection for Authentication on the virtual directory. Valid values are:

  • $null   This is the default value.

  • Single SPN or comma delimited list of valid SPNs   The SPN value format is <protocol>/<FQDN>. For example, HTTP/mail.contoso.com. To add an SPN that's not an FQDN (for example, HTTP/ContosoMail), you also need to use the AllowDotlessSPN value for the ExtendedProtectionFlags parameter.

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

ExtendedProtectionTokenChecking

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.ExtendedProtectionTokenCheckingMode

The ExtendedProtectionTokenChecking parameter defines how you want to use Extended Protection for Authentication on the virtual directory. Extended Protection for Authentication isn't enabled by default. Valid values are:

  • None   Extended Protection for Authentication isn't be used on the virtual directory. This is the default value.

  • Allow   Extended Protection for Authentication is used for connections between clients and the virtual directory if both the client and server support it. Connections that don't support Extended Protection for Authentication will work, but may not be as secure as connections that use Extended Protection for Authentication.

noteNote:
If you have a proxy server between the client and the client access services on the Mailbox server that's configured to terminate the client-to-proxy SSL channel, you also need to configure one or more Service Principal Names (SPNs) by using the ExtendedProtectionSPNList parameter.
  • Require   Extended Protection for Authentication is used for all connections between clients and the virtual directory. If either the client or server doesn't support Extended Protection for Authentication, the connection will fail. If you use this value, you also need to set an SPN value for the ExtendedProtectionSPNList parameter.

noteNote:
If you have a proxy server between the client and the Client Access services on the Exchange server that's configured to terminate the client-to-proxy SSL channel, you also need to configure one or more SPNs using the ExtendedProtectionSPNList parameter .

ExternalAuthenticationMethods

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ExternalAuthenticationMethods parameter restricts the authentication methods that can be used to connect to the virtual directory from outside the firewall. Valid values are:

  • Adfs

  • Basic

  • Certificate

  • Digest

  • Fba

  • Kerberos

  • LiveIdBasic

  • LiveIdFba

  • LiveIdNegotiate

  • NegoEx

  • Negotiate

  • Ntlm

  • OAuth

  • WindowsIntegrated

  • WSSecurity

You can specify multiple values separated by commas.

Although you can specify any of these values, whether or not the authentication method actually works for external connections depends on other factors. For example:

  • Is the authentication method available on the virtual directory?

  • Is the authentication method available, but disabled on the virtual directory?

ExternalSPMySiteHostURL

Optional

System.String

PARAMVALUE: String

ExternalUrl

Optional

System.Uri

The ExternalURL parameter specifies the URL that's used to connect to the virtual directory from outside the firewall.

This setting is important when Secure Sockets Layer (SSL) is used.

FailbackUrl

Optional

System.Uri

The FailbackUrl parameter specifies the host name Outlook on the web uses to connect to the server after failback in a site resilience process and requires a separate DNS entry pointing to the original server's IP address. The FailbackUrl parameter must be different from the ExternalUrl parameter.

FilterWebBeaconsAndHtmlForms

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.WebBeaconFilterLevels

The FilterWebBeaconsAndHtmlForms parameter specifies how web beacons are handled. The possible values are UserFilterChoice, ForceFilter, and DisableFilter.

ForceSaveAttachmentFilteringEnabled

Optional

System.Boolean

The ForceSaveAttachmentFilteringEnabled parameter specifies whether files included in the list of extensions created by the ForceSaveFileTypes parameter are filtered before the user can save them.

Valid input for this parameter is $true or $false. The default value is $false.

ForceSaveFileTypes

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ForceSaveFileTypes parameter specifies a list of extensions of attachments that can be opened only after the file is saved locally on the user's computer.

To enter multiple values and overwrite any existing entries, use the following syntax: <value1>,<value2>.... If the values contain spaces or otherwise require quotation marks, you need to use the following syntax: "<value1>","<value2>"....

To add or remove one or more values without affecting any existing entries, use the following syntax: @{Add="<value1>","<value2>"...; Remove="<value1>","<value2>"...}.

ForceSaveMimeTypes

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ForceSaveMimeTypes parameter specifies the MIME types of attachments that can be opened only after the file is saved locally on the user's computer.

ForceWacViewingFirstOnPrivateComputers

Optional

System.Boolean

The ForceWacViewingFirstOnPrivateComputers parameter specifies whether a user can open an Office file directly without first viewing it as a web page.

Valid input for this parameter is $true or $false. The default value is $false.

By default, Outlook on the web in Exchange 2016 assumes you are connecting from a private computer. In order to show the Private computer option at sign-in, you set the LogonPagePublicPrivateSelectionEnabled parameter to the value $true.

ForceWacViewingFirstOnPublicComputers

Optional

System.Boolean

The ForceWacViewingFirstOnPublicComputers parameter specifies whether a user who logs on after unchecking the Private computer option can open an Office file directly without first viewing it as a web page.

Valid input for this parameter is $true or $false. The default value is $false.

By default, Outlook on the web in Exchange 2016 assumes you are connecting from a private computer. Therefore, this parameter is meaningful only if you set the LogonPagePublicPrivateSelectionEnabled parameter to the value $true. This allows you to uncheck the Private computer option at sign-in, which indicates you are connecting from a public computer.

FormsAuthentication

Optional

System.Boolean

The FormsAuthentication parameter enables or disables forms-based authentication on the Outlook on the web virtual directory.

Valid input for this parameter is $true or $false. The default value is $true.

If the FormsAuthentication parameter is set to $true, the BasicAuthentication parameter is set to $true, and the DigestAuthentication and WindowsAuthentication parameters are set to $false.

GlobalAddressListEnabled

Optional

System.Boolean

The GlobalAddressListEnabled parameter specifies whether to show the global address list in Outlook on the web.

GzipLevel

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.GzipLevel

The GzipLevel parameter sets Gzip configuration information for the Outlook on the web virtual directory.

InstantMessagingCertificateThumbprint

Optional

System.String

The InstantMessagingCertificateThumbprint parameter specifies the trusted certificate used to communicate between the instant messaging server and the Mailbox server. Use the Get-ExchangeCertificate cmdlet to find the thumbprint of the certificate.

InstantMessagingEnabled

Optional

System.Boolean

The InstantMessagingEnabled parameter specifies whether to enable instant messaging in Outlook on the web.

InstantMessagingServerName

Optional

System.String

The InstantMessagingServerName parameter specifies the fully qualified domain name (FQDN) of the instant messaging server or set of servers behind a load balancing device.

InstantMessagingType

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.InstantMessagingTypeOptions

The InstantMessagingType parameter specifies the type of instant messaging provider to be used. Set this parameter to None for no provider and Ocs for Microsoft Office Communications Server. The Msn value is no longer used and will be deprecated.

IntegratedFeaturesEnabled

Optional

System.Boolean

The IntegratedFeaturesEnabled parameter specifies whether to allow Outlook on the web users who are logged on using Integrated Windows authentication to access specific features. For example, if this value is set to $true, users logged on using Integrated Windows authentication can view and change meeting content. This is set to $true by default.

InternalSPMySiteHostURL

Optional

System.String

PARAMVALUE: String

InternalUrl

Optional

System.Uri

The InternalURL parameter specifies the URL that's used to connect to the virtual directory from inside the firewall.

This setting is important when SSL is used.

IRMEnabled

Optional

System.Boolean

The IRMEnabled parameter specifies whether the Information Rights Management (IRM) feature is enabled.

IsPublic

Optional

System.Boolean

PARAMVALUE: $true | $false

JournalEnabled

Optional

System.Boolean

The JournalEnabled parameter specifies whether the Journal folder is visible.

JunkEmailEnabled

Optional

System.Boolean

The JunkEmailEnabled parameter specifies whether the Junk Email management tools are enabled.

LogonAndErrorLanguage

Optional

System.Int32

The LogonAndErrorLanguage parameter specifies which language Outlook on the web uses for forms-based authentication and for error messages that occur when a user's current language setting can't be read. When this parameter has a value of 0, the language selection is undefined.

LogonFormat

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.LogonFormats

The LogonFormat parameter specifies the type of logon format forms-based authentication must use on the Outlook on the web sign-in page.

Possible attributes are FullDomain, UserName, or PrincipalName.

If you specify the FullDomain attribute, the User name field on the Outlook on the web sign-in page requires the user name to be entered in the format domain\user name.

If you specify the UserName attribute, you must also specify the DefaultDomain parameter.

If you specify the PrincipalName attribute, the User name field on the Outlook on the web sign-in page requires a user principal name (UPN) address. This sign-in method works only for users whose UPN name is the same as their email address.

LogonPageLightSelectionEnabled

Optional

System.Boolean

The LogonPageLightSelectionEnabled parameter specifies whether the Outlook on the web sign-in page includes the option to sign in to the light version of Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

LogonPagePublicPrivateSelectionEnabled

Optional

System.Boolean

The LogonPagePublicPrivateSelectionEnabled parameter specifies whether the Outlook on the web sign-in page includes the Private computer option at sign-in. By default,

Valid input for this parameter is $true or $false. The default value is $false. By default, Exchange assumes you are connecting from a private computer.

To make the Private computer option available to check or uncheck, set the value of this parameter to $true, and then restart IIS.

NotesEnabled

Optional

System.Boolean

The NotesEnabled parameter specifies whether the Notes folder is visible in Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

NotificationInterval

Optional

System.Int32

This parameter has been deprecated and is no longer used.

OAuthAuthentication

Optional

System.Boolean

This parameter is reserved for internal Microsoft use.

OrganizationEnabled

Optional

System.Boolean

When the OrganizationEnabled parameter is set to $false, the Automatic Reply option doesn't include external and internal options, the address book doesn't show the organization hierarchy, and the Resources tab in Calendar forms is disabled. The default value is $true.

OutboundCharset

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.OutboundCharsetOptions

The OutboundCharset parameter specifies the character set used for messages sent by users on a specific Outlook on the web virtual directory.

OWALightEnabled

Optional

System.Boolean

This parameter has been deprecated and is no longer used.

PremiumClientEnabled

Optional

System.Boolean

This parameter has been deprecated and is no longer used.

PublicFoldersEnabled

Optional

System.Boolean

The PublicFoldersEnabled parameter specifies whether a user can browse or read items in public folders using Outlook on the web.

By default, the PublicFoldersEnabled parameter is set to $true. If the PublicFoldersEnabled parameter is set to $false, users can only access their private mailboxes in Outlook on the web.

RecoverDeletedItemsEnabled

Optional

System.Boolean

The RecoverDeletedItemsEnabled parameter specifies whether a user can use Outlook on the web to view, recover, or delete permanently items that have been deleted from the Deleted Items folder. By default, the RecoverDeletedItemsEnabled parameter is set to $true. If the RecoverDeletedItemsEnabled parameter is set to $false, the items deleted from the Deleted Items folder are retained. However, users can't view, recover, or permanently delete them using Outlook on the web.

RedirectToOptimalOWAServer

Optional

System.Boolean

The RedirectToOptimalOWAServer parameter, when set to $true, causes Outlook on the web to use service discovery to find the best Mailbox server to use after a user authenticates. If redirection is disabled, Outlook on the web doesn't redirect clients to the most optimal Mailbox server.

Valid input for this parameter is $true or $false. The default value is $true.

RemindersAndNotificationsEnabled

Optional

System.Boolean

The RemindersAndNotificationsEnabled parameter specifies whether notifications and reminders are enabled in Outlook on the web. This parameter doesn't apply to the light version of Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

RemoteDocumentsActionForUnknownServers

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.RemoteDocumentsActions

This parameter has been deprecated and is no longer used.

RemoteDocumentsAllowedServers

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter has been deprecated and is no longer used.

RemoteDocumentsBlockedServers

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter has been deprecated and is no longer used.

RemoteDocumentsInternalDomainSuffixList

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter has been deprecated and is no longer used.

ReportJunkEmailEnabled

Optional

System.Boolean

The ReportJunkEmailEnabled parameter specifies whether users can report messages as junk to Microsoft in Outlook on the web. Valid input for this parameter is $true or $false. The default value is $true.

If you set this parameter to $false, the Report mail as junk window doesn't appear after users select Mark as junk. This parameter is meaningful only when the JunkEmailEnabled parameter is set to $true.

RulesEnabled

Optional

System.Boolean

The RulesEnabled parameter specifies whether a user can view, create, or modify server-side rules using Outlook on the web. By default, the RulesEnabled parameter is set to $true. If the RulesEnabled parameter is set to $false, users must use Microsoft Outlook to view, create, and modify server-side rules.

SearchFoldersEnabled

Optional

System.Boolean

The SearchFoldersEnabled parameter specifies whether Search Folders are available in Outlook on the web.

SetPhotoEnabled

Optional

System.Boolean

The SetPhotoEnabled parameter specifies whether users can add, change, and remove their sender photo in Outlook on the web. The possible values for this parameter are $true or $false. The default value is $false. When this value is set to $true, users can manage their sender photo using two methods. They can click their name in the upper-right corner of Outlook on the web, click change, and then browse to the photo they want to use. Alternatively, users can manage their photo by clicking the gear icon in the upper-right corner of Outlook on the web, and then clicking Options > Account > My account > Edit > Change.

SetPhotoURL

Optional

System.String

The SetPhotoURL parameter specifies the location of the user photos. This value isn't set by default.

SignaturesEnabled

Optional

System.Boolean

The SignaturesEnabled parameter specifies whether to enable or disable the use of signatures in Outlook on the web.

SilverlightEnabled

Optional

System.Boolean

This parameter has been deprecated and is no longer used.

SMimeEnabled

Optional

System.Boolean

This parameter has been deprecated and is no longer used.

To configure the S/MIME settings in Outlook on the web, use the Get-SmimeConfig and Set-SmimeConfig cmdlets. For more information, see S/MIME for message signing and encryption.

SpellCheckerEnabled

Optional

System.Boolean

This parameter has been deprecated and is no longer used.

TasksEnabled

Optional

System.Boolean

The TasksEnabled parameter specifies whether a user can use the Tasks feature in Outlook on the web. This parameter doesn't apply to the light version of Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

TextMessagingEnabled

Optional

System.Boolean

The TextMessagingEnabled parameter specifies whether users can send and receive text messages. This parameter doesn't apply to the light version of Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

ThemeSelectionEnabled

Optional

System.Boolean

The ThemeSelectionEnabled parameter specifies whether users can select a theme in Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

UMIntegrationEnabled

Optional

System.Boolean

The UMIntegrationEnabled parameter specifies whether Unified Messaging is enabled on Outlook on the web. This setting applies only if Unified Messaging has been enabled for a user using the Enable-UMMailbox cmdlet. This parameter doesn't apply to the light version of Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

UNCAccessOnPrivateComputersEnabled

Optional

System.Boolean

This parameter has been deprecated and is no longer used.

UNCAccessOnPublicComputersEnabled

Optional

System.Boolean

This parameter has been deprecated and is no longer used.

UseGB18030

Optional

System.Boolean

The UseGB18030 parameter specifies when to use the character set GB18030. This parameter is a character-handling registry key that works in coordination with the OutboundCharset registry key. When the UseGB18030 parameter is set to $true, the character set GB18030 is used wherever GB2312 would have been used. The default value is $false.

UseISO885915

Optional

System.Boolean

The UseISO885915 parameter specifies when to use the character set ISO8859-15. This parameter is a character-handling registry key that works in coordination with the OutboundCharset registry key. When the UseISO885915 parameter is set to $true, the character set ISO8859-15 is used wherever ISO8859-1 would have been used. The default value is $false.

UserContextTimeout

Optional

System.Int32

The UserContextTimeout parameter specifies the time-out setting, in minutes, for a user context object. This parameter doesn't limit public and private forms-based authentication time-out settings.

VirtualDirectoryType

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.VirtualDirectoryTypes

This parameter has been deprecated and is no longer used.

WacEditingEnabled

Optional

System.Boolean

PARAMVALUE: $true | $false

WacViewingOnPrivateComputersEnabled

Optional

System.Boolean

The WacViewingOnPrivateComputersEnabled parameter specifies whether a user can view supported Office files using Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

By default, Outlook on the web in Exchange 2016 assumes you are connecting from a private computer. In order to show the Private computer option at sign-in, you set the LogonPagePublicPrivateSelectionEnabled parameter to the value $true.

WacViewingOnPublicComputersEnabled

Optional

System.Boolean

The WacViewingOnPublicComputersEnabled parameter specifies whether a user who logs on after unchecking the Private computer option can view supported Office files using Outlook on the web.

Valid input for this parameter is $true or $false. The default value is $true.

By default, Outlook on the web in Exchange 2016 assumes you are connecting from a private computer. Therefore, this parameter is meaningful only if you set the LogonPagePublicPrivateSelectionEnabled parameter to the value $true. This allows you to uncheck the Private computer option at sign-in, which indicates you are connecting from a public computer.

WebPartsFrameOptionsType

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.WebPartsFrameOptions

The WebPartsFrameOptionsType parameter specifies what sources can access Outlook on the web web parts in IFRAME or FRAME elements.

This parameter can have the following values:

  • None   This indicates that there are no restrictions on displaying Outlook on the web content in a frame.

  • SameOrigin   This is the default value and the recommended value. This allows display of Outlook on the web content only in a frame that has the same origin as the content.

  • Deny   This blocks display of Outlook on the web content in a frame regardless of the origin of the site attempting to access it.

  • AllowFrom   This isn't yet available. It will be implemented in a later release.

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

WindowsAuthentication

Optional

System.Boolean

The WindowsAuthentication parameter enables or disables Integrated Windows authentication on the Outlook on the web virtual directory.

Valid input for this parameter is $true or $false. The default value is $false.

WSSAccessOnPrivateComputersEnabled

Optional

System.Boolean

This parameter has been deprecated and is no longer used.

WSSAccessOnPublicComputersEnabled

Optional

System.Boolean

This parameter has been deprecated and is no longer used.

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.

 
Weergeven:
© 2016 Microsoft