Share via


Connect to the Internet by using a modem

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

To connect to the Internet by using a modem

  1. Install the modem hardware on your computer.

  2. Add the modem to your computer. In Control Panel, double-click Phone and Modem Options.

  3. If you are prompted to provide location information, do so and then click OK.

  4. On the Modems tab, click Add. Follow the steps in the Add Hardware Wizard.

  5. After the modem is added, verify that the modem appears as a port under Ports in Routing and Remote Access.

  6. To configure the modem port, right-click Ports, and then click Properties.

  7. In the Port Properties dialog box, select the modem you want to configure, click Configure, select the Demand-dial routing connections (inbound and outbound) check box, and then click OK.

  8. To create a demand-dial interface and configure it to use the modem to dial in to the ISP, right-click Network Interfaces, and then click New Demand-dial interface.

  9. Add a default network route that uses the newly created demand-dial interface.

Note

  • A default network route has a Destination of 0.0.0.0, a Network mask of 0.0.0.0, and a Metric of 1. Because the dial-up connection to the ISP is a point-to-point link, the Gateway IP address is not configurable.

Information about functional differences

  • Your server might function differently based on the version and edition of the operating system that is installed, your account permissions, and your menu settings. For more information, see Viewing Help on the Web.

See Also

Concepts

Working with MMC console files
Internet Connection Sharing and network address translation
Routed Connection to the Internet
Add a demand-dial interface
Add a default static IP route