Edit Edge Settings Expander for Lync Server 2010

 

Дата изменения раздела:2012-11-14

You edit the settings for the Пограничный сервер or пул by configuring the following properties:

General

  • Internal pool FQDN : The internal pool fully qualified domain name is the identity of the Пограничный сервер or пул as defined in the domain name system (DNS) host (A or AAAA for IPv6) record.

  • Select Enable federation for this Edge pool (port 5061) if you want to enable the Пограничный сервер or пул for federation with other session initiation protocol partners.

    importantВажно!
    You can only define one Пограничный сервер or пул actively for federation. The configuration shown in the associated screen shot indicates that another Пограничный сервер or пул is already configured for federation. The external DNS SRV record for federation (_sipfederationtls._tcp.<external domain name>) will point to the Пограничный сервер or пул for federation.
  • The Internal Configuration Replication Port (HTTPS) , by default at TCP port 4443, is the port that the local (that is, local to the Пограничные серверы) copy of the управления is replicated over. The local copy of the управления is in the RTCLOCAL database in the SQL Server on each computer. The replication is one-way, initiated from the управления (or, the переднего плана or переднего плана that holds the управления role) to the Пограничные серверы and is an internal interface port.

Next hop selection

  • Select for the list your Next hop pool . You define either a Директор, директоров, переднего плана or переднего плана to assume this role. The next hop pool is the server or server pool that will accept inbound SIP messages from the Пограничный сервер or пул internal interface and send outbound SIP to the Edge internal interface.

    noteПримечание.
    The Директор is an optional role and if you decide not to deploy Директоры, the Серверы переднего плана (single computer or pool) will assume the Директор role.

External settings

This section of the properties allows you to edit properties for the external settings of the Пограничный сервер or пул. The following properties are available to edit:

  • Select the Enable separate FQDN and IP address for web conferencing and A/V check box if you want to assign distinct IP addresses and fully qualified domain names to each Пограничный сервер service.

    noteПримечание.
    If you choose to not select the check box, you must use separate ports for each Edge service. Each Edge service will share the FQDN defined for the доступа, and will therefore use the same IP address. Each Edge service must be uniquely identified by either a distinct IP address and same port, or the same IP address and unique port values.
  • Select A/V Edge service is NAT enabled if you want to configure the передачи аудио- и видеоданных to use a private address or other address that will be hidden behind a network address translation (NAT) device.

  • To edit the Access Edge service , you define the Pool FQDN for the доступа as defined in DNS by host (A, and AAAA if IPv6 is used) records and a port value

  • To edit the Web Conferencing Edge service , you define a Pool FQDN for the веб-конференций as defined in DNS by host (A, and AAAA if IPv6 is used) records and a port value

  • To edit the A/V Edge service , you define a Pool FQDN for the передачи аудио- и видеоданных as defined in DNS by host (A, and AAAA if IPv6 is used) records and a port value

    importantВажно!
    If you have selected the Enable separate FQDN and IP address for web conferencing and A/V check box, only the доступа Pool FQDN will be available for editing. Assign distinct ports for each of the three Edge services.

OK Accepts and commits changes to the dialog.

Cancel Discards changes and closes the dialog.

Help Displays this help screen.

 
Показ: