Security Bulletin

Microsoft Security Bulletin MS08-013 - Critical

Published: February 12, 2008 | Updated: January 12, 2010

Version: 1.4

This critical security update resolves a privately reported vulnerability in Microsoft Office. The vulnerability could allow remote code execution if a user opens a specially crafted Microsoft Office file with a malformed object inserted into the document. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

This is a critical security update for all supported editions of Microsoft Office 2000 and an important security update for Microsoft Office XP, Microsoft Office 2003 and Microsoft Office 2004 for Mac. For more information, see the subsection, Affected and Non-Affected Software, in this section.

This security update addresses the vulnerability by modifying the way that Microsoft Office loads documents with inserted objects. For more information about the vulnerability, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Recommendation.  Microsoft recommends that customers apply the update immediately

Known Issues.  None

The following software has been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software

Non-Affected Software

I use Microsoft Office 2003 Service Pack 2. Are any additional security features included in this update?
Yes, as part of the servicing model for Microsoft Office 2003, when users of Microsoft Office 2003 Service Pack 2 install this update, their systems will be upgraded to security functionality that was initially released with Microsoft Office 2003 Service Pack 3. All updates released after January 1, 2008 for Microsoft Office 2003 Service Pack 2 will include these security features, which were introduced in Microsoft Office 2003 Service Pack 3. We have thoroughly tested this update, but as with all updates, we recommend that users perform testing appropriate to the environment and configuration of their systems. For more information on this issue, please see Microsoft Knowledge Base Article 951646.

After installing this update, why can I not remove it?
An issue exists in Microsoft Office XP and Office 2003 that causes Office to be partially uninstalled when updates to certain components are installed or uninstalled. This update fixes that issue. However, when this update is uninstalled, the issue is reintroduced and Office is partially uninstalled. To prevent this behavior, Microsoft has marked this update as not uninstallable.

I am using an older release of the software discussed in this security bulletin. What should I do?
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. To determine the support life cycle for your software release, visit Microsoft Support Lifecycle.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle. For more information about the extended security update support period for these software releases, visit the Microsoft Product Support Services Web site.

Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

I do not have the complete Microsoft Office suite listed in the Affected Software table, but only one of the component applications such as Word. Will my system be offered the security update?
The vulnerability that is the subject of this security bulletin affects only the complete Microsoft Office suite listed in the Affected Software section. However, specific Microsoft Office applications use some of the same files as the complete Microsoft Office suite for which the security update applies. We recommend installing the update to prevent the security update from being offered again.

I use Microsoft Office 2003 Service Pack 3. Why am I still being offered this update?
Microsoft Office 2003 Service Pack 3 is not impacted by the security vulnerabilities documented in this bulletin. However, users will still be offered this update because the updated files for Microsoft Office 2003 Service Pack 3 are newer (with higher version numbers) than the files that were delivered with Microsoft Office Service Pack 3. We have thoroughly tested this update, but as with all updates, we recommend that users perform testing appropriate to their environment and configurations of their systems.

Does the offer to update Microsoft Office 2003 Service Pack 3 constitute a flaw in the Microsoft update mechanism?
No, the update mechanism is functioning correctly in that it detects a lower version of the files on the system than in the update package and thus, offers the update.

What is included in the Microsoft Office Service Pack 3 update that causes the higher version of the update files?
The update files include changes to support stability changes in Microsoft Office 2003 Service Pack 3 and additional changes to support corporate environment changes. We have thoroughly tested this update, but as with all updates, we recommend that users perform testing appropriate to their environment and configurations of their systems.

The vulnerability could allow remote code execution if a user opens a specially crafted Microsoft Office document with a malformed object inserted into the document. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2008-0103.

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

• The vulnerability cannot be exploited automatically through e-mail. For an attack to be successful, a user must open an attachment that is sent in an e-mail message.
• In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
• An attacker who successfully exploited this vulnerability could take complete control of an affected system. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
• Users who have installed and are using the Office Document Open Confirmation Tool for Office 2000 will be prompted with Open, Save, or Cancel before opening a document. The features of the Office Document Open Confirmation Tool are incorporated in Office XP and later editions of Office.

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

• Restrict access to VBE6.dll

  To restrict access to VBE6.dll, type the following at the command prompt:

  For Windows XP:

  Echo y|cacls "%ProgramFiles%\common files\microsoft shared\vba\vba6\vbe6.dll" /E /P everyone:N
  

  For Windows Vista:

  Takeown.exe /f "%ProgramFiles%\common files\microsoft shared\vba\vba6\vbe6.dll"
  Icacls.exe "%ProgramFiles%\common files\microsoft shared\vba\vba6\vbe6.dll" /save %TEMP%\VBE6_ACL.TXT
  Icacls.exe "%ProgramFiles%\common files\microsoft shared\vba\vba6\vbe6.dll" /deny everyone:(F)
  

  Impact of workaround: The impact of implementing this workaround is that Microsoft Office files with VBA content (such as with macros) will no longer load.

  How to undo the workaround: To rollback this workaround, type the following at the command prompt:

  For Windows XP:

  cacls "%ProgramFiles%\common files\microsoft shared\vba\vba6\vbe6.dll" /E /R everyone
  

  For Windows Vista:

  icacls "%ProgramFiles%\common files\microsoft shared\vba\vba6\vbe6.dll" /grant everyone:(F)
  icacls "%ProgramFiles%\common files\microsoft shared\vba\vba6" /restore %TEMP%\VBE6_ACL.TXT
  

• Do not open or save Microsoft Office files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.

What is the scope of the vulnerability?
This is a remote code execution vulnerability In Microsoft Office. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
The vulnerability is caused by a memory handling error in Microsoft Office when a user opens a specially crafted Office file with malformed objects inserted. The error may corrupt system memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
This vulnerability requires that a user open a specially crafted Office file with an affected edition of Microsoft Office.

In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a specially-crafted Office file to the user and by convincing the user to open the file.

In a Web-based attack scenario, an attacker would have to host a Web site that contains a Office file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes them to the attacker's Web site.

What systems are primarily at risk from the vulnerability?
Systems where Microsoft Office is used are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update removes the vulnerability by modifying the way Office manages memory allocations when opening Office documents with object information inserted in the documents.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued. This security bulletin addresses the privately disclosed vulnerability as well as additional issues discovered through internal investigations.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Manage the software and security updates you need to deploy to the servers, desktop, and mobile computers in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.

Security updates are available from Microsoft Update, Windows Update, and Office Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."

Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, “MS07-036”), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.

Detection and Deployment Guidance

Microsoft has provided detection and deployment guidance for this month’s security updates. This guidance will also help IT professionals understand how they can use various tools to help deploy the security update, such as Windows Update, Microsoft Update, Office Update, the Microsoft Baseline Security Analyzer (MBSA), the Office Detection Tool, Microsoft Systems Management Server (SMS), and the Extended Security Update Inventory Tool. For more information, see Microsoft Knowledge Base Article 910723.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.

The following table provides the MBSA detection summary for this security update.

For more information about MBSA 2.0.1, see MBSA 2.0 Frequently Asked Questions.

Note For customers using legacy software not supported by MBSA 2.0.1, Microsoft Update, and Windows Server Update Services: please visit Microsoft Baseline Security Analyzer and reference the Legacy Product Support section on how to create comprehensive security update detection with legacy tools.

Windows Server Update Services

By using Windows Server Update Services (WSUS), administrators can deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 to Windows 2000 and later operating systems. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server

The following table provides the SMS detection and deployment summary for this security update.

For SMS 2.0 and SMS 2003, the SMS SUS Feature Pack (SUSFP), which includes the Security Update Inventory Tool (SUIT), can be used by SMS to detect security updates. See also Downloads for Systems Management Server 2.0.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications. For more information about the Office Inventory Tool and other scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.

System Center Configuration Manager (SCCM) 2007 uses WSUS 3.0 for detection of updates. For more information about SCCM 2007 Software Update Management, visit System Center Configuration Manager 2007.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Note If you have used an Administrative Installation Point (AIP) for deploying Office 2000, Office XP or Office 2003, you may not be able to deploy the update using SMS if you have updated the AIP from the original baseline. For more information, see the Office Administrative Installation Point heading in this section.

Office Administrative Installation Point

If you installed your application from a server location, the server administrator must update the server location with the administrative update and deploy that update to your system.

• For supported versions of Microsoft Office 2000, see How to Create an Administrative Installation Point. For more information about how to change the source for a client system from an updated administrative installation point to an Office 2000 original baseline source or Service Pack 3 (SP3), see Microsoft Knowledge Base Article 932889. Note. If you plan to manage software updates centrally from an updated administrative image, you can find more information in the article Updating Office 2000 Clients from a Patched Administrative Image.
• For supported versions of Microsoft Office XP, see Creating an Administrative Installation Point. For more information on how to change the source for a client system from an updated administrative installation point to an Office XP original baseline source or Service Pack 3 (SP3), see Microsoft Knowledge Base Article 922665. Note. If you plan to manage software updates centrally from an updated administrative image, you can find more information in the article Updating Office XP Clients from a Patched Administrative Image.
• For supported versions of Microsoft Office 2003, see Creating an Administrative Installation Point. If you have an Administrative Installation Point with a non-supported version of Microsoft Office 2003, see Microsoft Knowledge Base Article 902349. Note. If you plan to manage software updates centrally from an updated administrative image, you can find more information in the article Distributing Office 2003 Product Updates.
• For supported versions of the 2007 Microsoft Office system, see Create a network installation point for the 2007 Office system. Note. If you plan to manage security updates centrally use Windows Server Update Services. For more information about how to deploy security updates for the 2007 Microsoft Office system using Windows Server Update Services, visit the Windows Server Update Services Web site.

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

For all supported editions of Office 2000:

Note For a complete list of supported versions, see the Support Lifecycle Index. For a complete list of service packs, see Lifecycle Supported Service Packs. For more information on the support lifecycle policy, see Microsoft Support Lifecycle.

Server administrators who use a Windows Installer Administrative Installation must update the server location. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update.

To install all features, you can use REINSTALL=ALL or you can install the following features:

Note Administrators working in managed environments can find resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the setup switches supported by Windows Installer.

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

• Windows Installer 3.1 Redistributable
• Windows Installer 2.0 Redistributable for Windows 2000 and Windows NT 4.0
• Windows Installer 2.0 Redistributable for Windows 95, Windows 98, Windows 98 SE, and Windows Millennium Edition

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

After you install the update, you cannot remove it. To revert to an installation before the update was installed; you must remove the application, and then install it again from the original media.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer

  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the “Microsoft baseline Security Analyzer” heading under the section, Microsoft Detection and Deployment Tools and Guidance.

• File Version Verification

  Because there are several versions and editions of Microsoft Office, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

For all supported editions of Office XP:

Note For a complete list of supported versions, see the Support Lifecycle Index. For a complete list of service packs, see Lifecycle Supported Service Packs. For more information on the support lifecycle policy, see Microsoft Support Lifecycle.

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update. To install all features, you can use REINSTALL=ALL or you can install the following features:

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

• Windows Installer 3.1 Redistributable
• Windows Installer 2.0 Redistributable for Windows 2000 and Windows NT 4.0
• Windows Installer 2.0 Redistributable for Windows 95, Windows 98, Windows 98 SE, and Windows Millennium Edition

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

After you install the update, you cannot remove it. To revert to an installation before the update was installed; you must remove the application, and then install it again from the original media.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer

  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the “Microsoft baseline Security Analyzer” heading under the section, Microsoft Detection and Deployment Tools and Guidance.

• File Version Verification

  Because there are several versions and editions of Microsoft Office, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

For all supported editions of Office 2003:

Note For a complete list of supported versions, see the Support Lifecycle Index. For a complete list of service packs, see Lifecycle Supported Service Packs. For more information on the support lifecycle policy, see Microsoft Support Lifecycle.

Server administrators who use a Windows Installer Administrative Installation must update the server location. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update.

To install all features, you can use REINSTALL=ALL or you can install the following features:

Note Administrators working in managed environments can find resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the setup switches supported by Windows Installer.

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

• Windows Installer 3.1 Redistributable
• Windows Installer 2.0 Redistributable for Windows 2000 and Windows NT 4.0
• Windows Installer 2.0 Redistributable for Windows 95, Windows 98, Windows 98 SE, and Windows Millennium Edition

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

After you install the update, you cannot remove it. To revert to an installation before the update was installed; you must remove the application, and then install it again from the original media.

Verifying That the Update Has Been Applied

• Microsoft Baseline Security Analyzer

  To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the “Microsoft baseline Security Analyzer” heading under the section, Microsoft Detection and Deployment Tools and Guidance.

• File Version Verification

  Because there are several versions and editions of Microsoft Office, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

  1. Click Start, and then click Search.
  2. In the Search Results pane, click All files and folders under Search Companion.
  3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
  4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
  5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Prerequisites

• Mac OS X 10.2.8 or a later version of Mac OS on 700 MHz native PowerPC G3, G4, or G5 processor (Intel processors are not supported)
• Mac OS X user accounts must have administrator privileges to install this security update.

Installing the Update

Download and install the appropriate language version of the Microsoft Office 2004 for Mac 11.4.0 Update from the Microsoft Mactopia Web site.

Removing the Update

This security update cannot be uninstalled.

Additional Information

If you have technical questions or problems downloading or using this update, visit Microsoft for Mac Supportto learn about the support options that are available to you.

Microsoft thanks the following for working with us to help protect customers:

• Shaun Colley of NGSSoftware for reporting the Microsoft Office Execution Jump Vulnerability (CVE-2008-0103).

• Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
• International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

• V1.0 (February 12, 2008): Bulletin published.
• V1.1 (February 13, 2008): Bulletin updated to reflect that there are no known issues with installing this security update.
• V1.2 (February 27, 2008): Bulletin updated to reflect the reason why this update cannot be uninstalled for Office XP and Office 2003.
• V1.3 (April 16, 2008): Bulletin updated: Added entry to Update FAQ to describe additional security features included for Microsoft Office 2003 Service Pack 2.
• V1.4 (January 12, 2010): Bulletin updated: Corrected the bulletin replaced information for Microsoft Office 2003 Service Pack 2.

Built at 2014-04-18T13:49:36Z-07:00