Saklı yordam (odbc çağrı sözdizimi kullanarak) ve işlem dönüş kodları ve çıkış parametreleri (ole db) Yürüt

Makale
10/29/2012

SQL Serversaklı yordamlar dönüş kodları ve çıkış parametreleri tamsayı olabilir. Dönüş kodları ve çıkış parametreleri son pakette sunucudan gönderilen ve satır kümesi tümüyle serbest bırakılıncaya kadar nedenle uygulamada kullanılamaz. Komutu birden çok sonuç döndürürse, çıktı parametresi veri mevcut olduğunda IMultipleResults::GetResultdb_s_noresult verir ya da IMultipleResultsarayüzü tamamen serbest, hangisi ilk olursa.

Güvenlik Notu
Mümkünse Windows Kimlik Doğrulaması kullanın. Windows kimlik doğrulaması kimlik bilgilerini zamanında kullanılabilir, istem girmelerini değilse. Kimlik bilgileri bir dosyada saklamak kaçının. Kimlik ederse gerekir, onlarla şifrelemek Win32 şifreleme API.

İşlem dönüş kodları ve çıkış parametreleri

odbc call çıkış sırası kullanan sql deyimi oluşturun. Deyim ve parametresi çıkış ve yordamın dönüş değeri (varsa) her giriş/çıkış için parametre imleyicileri kullanmanız gerekir. Giriş parametreleri için değerleri parametre imleyicileri veya sabit bir kod kullanabilirsiniz.
Kümesi oluşturma DBBINDING yapısı dizisi kullanarak bağları (bir her parametre maker için).
Tanımlanan parametreler için bir erişimci kullanarak oluşturmak IAccessor::CreateAccessoryöntemi. CreateAccessorbir erişimci bağlama kümesinden oluşturur.
dbparams yapısında doldurun.
Arama Executekomutunu (Bu örnekte, arama için bir saklı yordam).
Satır kümesi işlemek ve kullanarak serbest IRowset::Releaseyöntemi.
Işlem dönüş kodu ve alınan saklı yordam çıkış parametresi değerleri.

Örnek

Örnek, satır kümesi, bir dönüş kodu ve bir çıktı parametresi gösterir. Sonuç kümeleri işlenmez. Bu örnek, IA64 üzerinde desteklenmiyor.

Bu örneği, sen-ebilmek download--dan AdventureWorks örnek veritabanını gerektirir Microsoft SQL Server örnekleri ve topluluk projeler Ana sayfa.

İlk çalıştırma (Transact-SQL) uygulama tarafından kullanılan bir saklı yordam oluşturmak için liste kodu.

Ole32.lib oleaut32.lib ile derlemek ve ikinci (c++) kod listesini yürütün. Bu uygulama için bilgisayarınızın varsayılan bağlar SQL Serverörneği. Bazı Windows işletim sistemlerinde değişiklik (localhost) ya da (Yerel) adına ihtiyacınız olacak, SQL Serverörneği. Adlandırılmış bir örneğine bağlanmak için L"(local) bağlantı dizesini değiştirin" l "(Yerel) \\name" , burada adıdır adlı örneği. Varsayılan olarak, SQL ServerExpress yükler adlandırılmış bir örneğine. Sqlncli.h içeren dizinin, INCLUDE çevre değişkeni içerdiğinden emin olun.

Üçüncü yürütme (Transact-SQL) uygulama tarafından kullanılan bir saklı yordam silmek için liste kodu.

USE AdventureWorks
if exists (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[myProc]'))
   DROP PROCEDURE myProc
GO

CREATE PROCEDURE myProc 
    @inparam nvarchar(5),,
    @outparam int OUTPUT

AS
SELECT Color, ListPrice 
FROM Production.Product WHERE Size > @inparam
SELECT @outparam = 100

IF  (@outparam > 0)
    RETURN 999
ELSE
    RETURN 888
GO

USE AdventureWorks
if exists (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[myProc]'))
   DROP PROCEDURE myProc
GO

CREATE PROCEDURE myProc 
    @inparam nvarchar(5),,
    @outparam int OUTPUT

AS
SELECT Color, ListPrice 
FROM Production.Product WHERE Size > @inparam
SELECT @outparam = 100

IF  (@outparam > 0)
    RETURN 999
ELSE
    RETURN 888
GO

// compile with: ole32.lib oleaut32.lib
void InitializeAndEstablishConnection();

#define UNICODE
#define DBINITCONSTANTS
#define INITGUID
#define OLEDBVER 0x0250   // to include correct interfaces

#include <windows.h>
#include <stdio.h>
#include <stddef.h>
#include <iostream>
#include <oledb.h>
#include <oledberr.h>
#include <SQLNCLI.h>

using namespace std;

IDBInitialize* pIDBInitialize = NULL;
IDBCreateSession* pIDBCreateSession = NULL;
IDBCreateCommand* pIDBCreateCommand = NULL;
ICommandText* pICommandText = NULL;

IRowset* pIRowset = NULL;
ICommandWithParameters* pICommandWithParams = NULL;
IAccessor* pIAccessor = NULL;
IDBProperties* pIDBProperties = NULL;

WCHAR* pStringsBuffer;
DBBINDING* pBindings;
const ULONG nInitProps = 4;
DBPROP InitProperties[nInitProps];

const ULONG nPropSet = 1;
DBPROPSET rgInitPropSet[nPropSet];
HRESULT hr;
HACCESSOR hAccessor;

const ULONG nParams = 3;   // Number of parameters in the command
DBPARAMBINDINFO ParamBindInfo[nParams];
ULONG i;
ULONG cbColOffset = 0;

ULONG ParamOrdinals[nParams];
DBROWCOUNT cNumRows = 0;
DBPARAMS Params;

// Declare an array of DBBINDING structures, one for each parameter in the command.
DBBINDING acDBBinding[nParams];
DBBINDSTATUS acDBBindStatus[nParams];

// The following buffer is used to store parameter values.
typedef struct tagSPROCPARAMS {
   long lReturnValue;
   long outParam;
   long inParam;
} SPROCPARAMS;

int main() {
   // The command to execute.
   WCHAR* wCmdString = L"{? = call myProc(?,?)}";

   SPROCPARAMS sprocparams = {0,0,14};

   // All the initialization activities in a separate function.
   InitializeAndEstablishConnection();

   // Create a new activity from the data source object.
   if ( FAILED(pIDBInitialize->QueryInterface( IID_IDBCreateSession, 
      (void**) &pIDBCreateSession))) {
         cout << "Failed to access IDBCreateSession interface.\n";
         goto EXIT;
   }
   if (FAILED(pIDBCreateSession->CreateSession( NULL, IID_IDBCreateCommand, 
      (IUnknown**) &pIDBCreateCommand))) {
         cout << "pIDBCreateSession->CreateSession failed.\n";
      goto EXIT;
   }

   // Create a Command object.
   if (FAILED(pIDBCreateCommand->CreateCommand(NULL, IID_ICommandText, 
      (IUnknown**) &pICommandText))) {
         cout << "Failed to access ICommand interface.\n";
         goto EXIT;
   }

   // Set the command text.
   if (FAILED(pICommandText->SetCommandText(DBGUID_DBSQL, wCmdString))) {
      cout << "Failed to set command text.\n";
      goto EXIT;
   }
   // No need to describe command parameters (parameter name, data type
   // etc) in DBPARAMBINDINFO structure and then SetParameterInfo(). The
   // provider obtains this information by calling appropriate helper
   // function.

   // Describe the consumer buffer by filling in the array of DBBINDING structures.  
   // Each binding associates a single parameter to the consumer's buffer.
   for ( i = 0 ; i < nParams ; i++ ) {
      acDBBinding[i].obLength = 0;
      acDBBinding[i].obStatus = 0;
      acDBBinding[i].pTypeInfo = NULL;
      acDBBinding[i].pObject = NULL;
      acDBBinding[i].pBindExt = NULL;
      acDBBinding[i].dwPart = DBPART_VALUE;
      acDBBinding[i].dwMemOwner = DBMEMOWNER_CLIENTOWNED;
      acDBBinding[i].dwFlags = 0;
      acDBBinding[i].bScale = 0;
   }   // end for

   acDBBinding[0].iOrdinal = 1;
   acDBBinding[0].obValue = offsetof(SPROCPARAMS, lReturnValue);
   acDBBinding[0].eParamIO = DBPARAMIO_OUTPUT;
   acDBBinding[0].cbMaxLen = sizeof(long);
   acDBBinding[0].wType = DBTYPE_I4;
   acDBBinding[0].bPrecision = 11;

   acDBBinding[1].iOrdinal = 2;
   acDBBinding[1].obValue = offsetof(SPROCPARAMS, inParam);
   acDBBinding[1].eParamIO = DBPARAMIO_INPUT;
   acDBBinding[1].cbMaxLen = sizeof(long);
   acDBBinding[1].wType = DBTYPE_I4;
   acDBBinding[1].bPrecision = 11;

   acDBBinding[2].iOrdinal = 3;
   acDBBinding[2].obValue = offsetof(SPROCPARAMS, outParam);
   acDBBinding[2].eParamIO = DBPARAMIO_OUTPUT;
   acDBBinding[2].cbMaxLen = sizeof(long);
   acDBBinding[2].wType = DBTYPE_I4;
   acDBBinding[2].bPrecision = 11;

   // Create an accessor from the above set of bindings.
   hr = pICommandText->QueryInterface( IID_IAccessor, (void**)&pIAccessor);
   if (FAILED(hr))
      cout << "Failed to get IAccessor interface.\n";

   hr = pIAccessor->CreateAccessor( DBACCESSOR_PARAMETERDATA, 
                                    nParams,       
                                    acDBBinding, 
                                    sizeof(SPROCPARAMS), 
                                    &hAccessor,
                                    acDBBindStatus);
   if (FAILED(hr))
      cout << "Failed to create accessor for the defined parameters.\n";

   // Fill in DBPARAMS structure for the command execution. This structure 
   // specifies the parameter values in the command and is then passed to Execute.
   Params.pData = &sprocparams;
   Params.cParamSets = 1;
   Params.hAccessor = hAccessor;

   // Execute the command.
   if ( FAILED(hr = pICommandText->Execute( NULL, 
                                            IID_IRowset, 
                                            &Params, 
                                            &cNumRows, 
                                            (IUnknown **) &pIRowset))) {
      cout << "Failed to execute command.\n";
      goto EXIT;
   }

   printf("After command execution but before rowset processing.\n\n");
   printf("  Return value = %d\n", sprocparams.lReturnValue);
   printf("  Output parameter value = %d\n", sprocparams.outParam);
   printf("  These are the same default values set in the application.\n\n\n");

   // Result set is not important in this example; release it without processing.
   pIRowset->Release();

   printf("After processing the result set...\n");
   printf("  Return value = %d\n", sprocparams.lReturnValue);
   printf("  Output parameter value = %d\n\n", sprocparams.outParam);

   // Release memory.
   pIAccessor->ReleaseAccessor(hAccessor, NULL);
   pIAccessor->Release();
   pICommandText->Release();
   pIDBCreateCommand->Release();
   pIDBCreateSession->Release();    
   if (FAILED(pIDBInitialize->Uninitialize()))
      // Uninitialize is not required, but it fails if an interface
      // has not been released.  This can be used for debugging.
      cout << "Problem uninitializing.\n";

   pIDBInitialize->Release();

   CoUninitialize();
   return 0;

EXIT:
   if (pIAccessor != NULL)
      pIAccessor->Release();
   if (pICommandText != NULL)
      pICommandText->Release();
   if (pIDBCreateCommand != NULL)
      pIDBCreateCommand->Release();
   if (pIDBCreateSession != NULL)
      pIDBCreateSession->Release();
   if (pIDBInitialize != NULL)
      if (FAILED(pIDBInitialize->Uninitialize()))
         // Uninitialize is not required, but it fails if an
         // interface has not been released.  This can be used for debugging.
         cout << "Problem in uninitializing.\n";
      pIDBInitialize->Release();

   CoUninitialize();
};

void InitializeAndEstablishConnection() {    
   // Initialize the COM library.
   CoInitialize(NULL);

   // Obtain access to the SQL Server Native Client OLE DB provider.    
   hr = CoCreateInstance( CLSID_SQLNCLI11, 
                          NULL, 
                          CLSCTX_INPROC_SERVER,
                          IID_IDBInitialize, 
                          (void **) &pIDBInitialize);
   if (FAILED(hr))
      cout << "Failed in CoCreateInstance().\n";

   // Initialize the property values needed to establish the connection.
   for ( i = 0 ; i < nInitProps ; i++ )
      VariantInit(&InitProperties[i].vValue);

   // Specify server name.
   InitProperties[0].dwPropertyID = DBPROP_INIT_DATASOURCE;
   InitProperties[0].vValue.vt = VT_BSTR;

   // Replace "MySqlServer" with proper value.
   InitProperties[0].vValue.bstrVal = SysAllocString(L"(local)");
   InitProperties[0].dwOptions = DBPROPOPTIONS_REQUIRED;
   InitProperties[0].colid = DB_NULLID;

   // Specify database name.
   InitProperties[1].dwPropertyID = DBPROP_INIT_CATALOG;
   InitProperties[1].vValue.vt = VT_BSTR;
   InitProperties[1].vValue.bstrVal = SysAllocString(L"AdventureWorks");
   InitProperties[1].dwOptions = DBPROPOPTIONS_REQUIRED;
   InitProperties[1].colid = DB_NULLID;

   InitProperties[2].dwPropertyID = DBPROP_AUTH_INTEGRATED;
   InitProperties[2].vValue.vt = VT_BSTR;
   InitProperties[2].vValue.bstrVal = SysAllocString(L"SSPI");
   InitProperties[2].dwOptions = DBPROPOPTIONS_REQUIRED;
   InitProperties[2].colid = DB_NULLID;

   // Now that properties are set, construct the DBPROPSET structure
   // (rgInitPropSet).  The DBPROPSET structure is used to pass an array
   // of DBPROP structures (InitProperties) to the SetProperties method.
   rgInitPropSet[0].guidPropertySet = DBPROPSET_DBINIT;
   rgInitPropSet[0].cProperties = 4;
   rgInitPropSet[0].rgProperties = InitProperties;

   // Set initialization properties.
   hr = pIDBInitialize->QueryInterface(IID_IDBProperties, (void **)&pIDBProperties);
   if (FAILED(hr))
      cout << "Failed to obtain IDBProperties interface.\n";

   hr = pIDBProperties->SetProperties(nPropSet, rgInitPropSet);
   if (FAILED(hr))
      cout << "Failed to set initialization properties.\n";

   pIDBProperties->Release();

   // Now establish a connection to the data source.
   if (FAILED(pIDBInitialize->Initialize()))
      cout << "Problem in initializing.\n";
}

// compile with: ole32.lib oleaut32.lib
void InitializeAndEstablishConnection();

#define UNICODE
#define DBINITCONSTANTS
#define INITGUID
#define OLEDBVER 0x0250   // to include correct interfaces

#include <windows.h>
#include <stdio.h>
#include <stddef.h>
#include <iostream>
#include <oledb.h>
#include <oledberr.h>
#include <SQLNCLI.h>

using namespace std;

IDBInitialize* pIDBInitialize = NULL;
IDBCreateSession* pIDBCreateSession = NULL;
IDBCreateCommand* pIDBCreateCommand = NULL;
ICommandText* pICommandText = NULL;

IRowset* pIRowset = NULL;
ICommandWithParameters* pICommandWithParams = NULL;
IAccessor* pIAccessor = NULL;
IDBProperties* pIDBProperties = NULL;

WCHAR* pStringsBuffer;
DBBINDING* pBindings;
const ULONG nInitProps = 4;
DBPROP InitProperties[nInitProps];

const ULONG nPropSet = 1;
DBPROPSET rgInitPropSet[nPropSet];
HRESULT hr;
HACCESSOR hAccessor;

const ULONG nParams = 3;   // Number of parameters in the command
DBPARAMBINDINFO ParamBindInfo[nParams];
ULONG i;
ULONG cbColOffset = 0;

ULONG ParamOrdinals[nParams];
DBROWCOUNT cNumRows = 0;
DBPARAMS Params;

// Declare an array of DBBINDING structures, one for each parameter in the command.
DBBINDING acDBBinding[nParams];
DBBINDSTATUS acDBBindStatus[nParams];

// The following buffer is used to store parameter values.
typedef struct tagSPROCPARAMS {
   long lReturnValue;
   long outParam;
   long inParam;
} SPROCPARAMS;

int main() {
   // The command to execute.
   WCHAR* wCmdString = L"{? = call myProc(?,?)}";

   SPROCPARAMS sprocparams = {0,0,14};

   // All the initialization activities in a separate function.
   InitializeAndEstablishConnection();

   // Create a new activity from the data source object.
   if ( FAILED(pIDBInitialize->QueryInterface( IID_IDBCreateSession, 
      (void**) &pIDBCreateSession))) {
         cout << "Failed to access IDBCreateSession interface.\n";
         goto EXIT;
   }
   if (FAILED(pIDBCreateSession->CreateSession( NULL, IID_IDBCreateCommand, 
      (IUnknown**) &pIDBCreateCommand))) {
         cout << "pIDBCreateSession->CreateSession failed.\n";
      goto EXIT;
   }

   // Create a Command object.
   if (FAILED(pIDBCreateCommand->CreateCommand(NULL, IID_ICommandText, 
      (IUnknown**) &pICommandText))) {
         cout << "Failed to access ICommand interface.\n";
         goto EXIT;
   }

   // Set the command text.
   if (FAILED(pICommandText->SetCommandText(DBGUID_DBSQL, wCmdString))) {
      cout << "Failed to set command text.\n";
      goto EXIT;
   }
   // No need to describe command parameters (parameter name, data type
   // etc) in DBPARAMBINDINFO structure and then SetParameterInfo(). The
   // provider obtains this information by calling appropriate helper
   // function.

   // Describe the consumer buffer by filling in the array of DBBINDING structures.  
   // Each binding associates a single parameter to the consumer's buffer.
   for ( i = 0 ; i < nParams ; i++ ) {
      acDBBinding[i].obLength = 0;
      acDBBinding[i].obStatus = 0;
      acDBBinding[i].pTypeInfo = NULL;
      acDBBinding[i].pObject = NULL;
      acDBBinding[i].pBindExt = NULL;
      acDBBinding[i].dwPart = DBPART_VALUE;
      acDBBinding[i].dwMemOwner = DBMEMOWNER_CLIENTOWNED;
      acDBBinding[i].dwFlags = 0;
      acDBBinding[i].bScale = 0;
   }   // end for

   acDBBinding[0].iOrdinal = 1;
   acDBBinding[0].obValue = offsetof(SPROCPARAMS, lReturnValue);
   acDBBinding[0].eParamIO = DBPARAMIO_OUTPUT;
   acDBBinding[0].cbMaxLen = sizeof(long);
   acDBBinding[0].wType = DBTYPE_I4;
   acDBBinding[0].bPrecision = 11;

   acDBBinding[1].iOrdinal = 2;
   acDBBinding[1].obValue = offsetof(SPROCPARAMS, inParam);
   acDBBinding[1].eParamIO = DBPARAMIO_INPUT;
   acDBBinding[1].cbMaxLen = sizeof(long);
   acDBBinding[1].wType = DBTYPE_I4;
   acDBBinding[1].bPrecision = 11;

   acDBBinding[2].iOrdinal = 3;
   acDBBinding[2].obValue = offsetof(SPROCPARAMS, outParam);
   acDBBinding[2].eParamIO = DBPARAMIO_OUTPUT;
   acDBBinding[2].cbMaxLen = sizeof(long);
   acDBBinding[2].wType = DBTYPE_I4;
   acDBBinding[2].bPrecision = 11;

   // Create an accessor from the above set of bindings.
   hr = pICommandText->QueryInterface( IID_IAccessor, (void**)&pIAccessor);
   if (FAILED(hr))
      cout << "Failed to get IAccessor interface.\n";

   hr = pIAccessor->CreateAccessor( DBACCESSOR_PARAMETERDATA, 
                                    nParams,       
                                    acDBBinding, 
                                    sizeof(SPROCPARAMS), 
                                    &hAccessor,
                                    acDBBindStatus);
   if (FAILED(hr))
      cout << "Failed to create accessor for the defined parameters.\n";

   // Fill in DBPARAMS structure for the command execution. This structure 
   // specifies the parameter values in the command and is then passed to Execute.
   Params.pData = &sprocparams;
   Params.cParamSets = 1;
   Params.hAccessor = hAccessor;

   // Execute the command.
   if ( FAILED(hr = pICommandText->Execute( NULL, 
                                            IID_IRowset, 
                                            &Params, 
                                            &cNumRows, 
                                            (IUnknown **) &pIRowset))) {
      cout << "Failed to execute command.\n";
      goto EXIT;
   }

   printf("After command execution but before rowset processing.\n\n");
   printf("  Return value = %d\n", sprocparams.lReturnValue);
   printf("  Output parameter value = %d\n", sprocparams.outParam);
   printf("  These are the same default values set in the application.\n\n\n");

   // Result set is not important in this example; release it without processing.
   pIRowset->Release();

   printf("After processing the result set...\n");
   printf("  Return value = %d\n", sprocparams.lReturnValue);
   printf("  Output parameter value = %d\n\n", sprocparams.outParam);

   // Release memory.
   pIAccessor->ReleaseAccessor(hAccessor, NULL);
   pIAccessor->Release();
   pICommandText->Release();
   pIDBCreateCommand->Release();
   pIDBCreateSession->Release();    
   if (FAILED(pIDBInitialize->Uninitialize()))
      // Uninitialize is not required, but it fails if an interface
      // has not been released.  This can be used for debugging.
      cout << "Problem uninitializing.\n";

   pIDBInitialize->Release();

   CoUninitialize();
   return 0;

EXIT:
   if (pIAccessor != NULL)
      pIAccessor->Release();
   if (pICommandText != NULL)
      pICommandText->Release();
   if (pIDBCreateCommand != NULL)
      pIDBCreateCommand->Release();
   if (pIDBCreateSession != NULL)
      pIDBCreateSession->Release();
   if (pIDBInitialize != NULL)
      if (FAILED(pIDBInitialize->Uninitialize()))
         // Uninitialize is not required, but it fails if an
         // interface has not been released.  This can be used for debugging.
         cout << "Problem in uninitializing.\n";
      pIDBInitialize->Release();

   CoUninitialize();
};

void InitializeAndEstablishConnection() {    
   // Initialize the COM library.
   CoInitialize(NULL);

   // Obtain access to the SQL Server Native Client OLE DB provider.    
   hr = CoCreateInstance( CLSID_SQLNCLI11, 
                          NULL, 
                          CLSCTX_INPROC_SERVER,
                          IID_IDBInitialize, 
                          (void **) &pIDBInitialize);
   if (FAILED(hr))
      cout << "Failed in CoCreateInstance().\n";

   // Initialize the property values needed to establish the connection.
   for ( i = 0 ; i < nInitProps ; i++ )
      VariantInit(&InitProperties[i].vValue);

   // Specify server name.
   InitProperties[0].dwPropertyID = DBPROP_INIT_DATASOURCE;
   InitProperties[0].vValue.vt = VT_BSTR;

   // Replace "MySqlServer" with proper value.
   InitProperties[0].vValue.bstrVal = SysAllocString(L"(local)");
   InitProperties[0].dwOptions = DBPROPOPTIONS_REQUIRED;
   InitProperties[0].colid = DB_NULLID;

   // Specify database name.
   InitProperties[1].dwPropertyID = DBPROP_INIT_CATALOG;
   InitProperties[1].vValue.vt = VT_BSTR;
   InitProperties[1].vValue.bstrVal = SysAllocString(L"AdventureWorks");
   InitProperties[1].dwOptions = DBPROPOPTIONS_REQUIRED;
   InitProperties[1].colid = DB_NULLID;

   InitProperties[2].dwPropertyID = DBPROP_AUTH_INTEGRATED;
   InitProperties[2].vValue.vt = VT_BSTR;
   InitProperties[2].vValue.bstrVal = SysAllocString(L"SSPI");
   InitProperties[2].dwOptions = DBPROPOPTIONS_REQUIRED;
   InitProperties[2].colid = DB_NULLID;

   // Now that properties are set, construct the DBPROPSET structure
   // (rgInitPropSet).  The DBPROPSET structure is used to pass an array
   // of DBPROP structures (InitProperties) to the SetProperties method.
   rgInitPropSet[0].guidPropertySet = DBPROPSET_DBINIT;
   rgInitPropSet[0].cProperties = 4;
   rgInitPropSet[0].rgProperties = InitProperties;

   // Set initialization properties.
   hr = pIDBInitialize->QueryInterface(IID_IDBProperties, (void **)&pIDBProperties);
   if (FAILED(hr))
      cout << "Failed to obtain IDBProperties interface.\n";

   hr = pIDBProperties->SetProperties(nPropSet, rgInitPropSet);
   if (FAILED(hr))
      cout << "Failed to set initialization properties.\n";

   pIDBProperties->Release();

   // Now establish a connection to the data source.
   if (FAILED(pIDBInitialize->Initialize()))
      cout << "Problem in initializing.\n";
}

USE AdventureWorks
DROP PROCEDURE myProc
GO

USE AdventureWorks
DROP PROCEDURE myProc
GO

Ayrıca bkz.

Kavramlar

Sonuçları nasıl yapılır konuları (ole db) işleme

Share via

Saklı yordam (odbc çağrı sözdizimi kullanarak) ve işlem dönüş kodları ve çıkış parametreleri (ole db) Yürüt

İşlem dönüş kodları ve çıkış parametreleri

Örnek

Ayrıca bkz.

Kavramlar

Ek kaynaklar