Set-WdsClient

Set-WdsClient

Modifies a pre-staged client device.

语法

Parameter Set: DeviceName
Set-WdsClient -DeviceName <String> [-AsJob] [-BootImagePath <String> ] [-CimSession <CimSession[]> ] [-DeviceID <String> ] [-Group <String> ] [-JoinDomain <Boolean> ] [-PxePromptPolicy <PxePromptPolicy> ] [-ReferralServer <String> ] [-ResetAccount] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: Domain
Set-WdsClient -DeviceName <String> -Domain [-AsJob] [-BootImagePath <String> ] [-CimSession <CimSession[]> ] [-DeviceID <String> ] [-DomainName <String> ] [-Group <String> ] [-JoinDomain <Boolean> ] [-PxePromptPolicy <PxePromptPolicy> ] [-ReferralServer <String> ] [-ResetAccount] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: SearchForest
Set-WdsClient -DeviceName <String> -SearchForest [-AsJob] [-BootImagePath <String> ] [-CimSession <CimSession[]> ] [-DeviceID <String> ] [-Group <String> ] [-JoinDomain <Boolean> ] [-PxePromptPolicy <PxePromptPolicy> ] [-ReferralServer <String> ] [-ResetAccount] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: UserAndJoinRights
Set-WdsClient -DeviceName <String> -JoinRights <JoinRights> -User <String> [-AsJob] [-BootImagePath <String> ] [-CimSession <CimSession[]> ] [-DeviceID <String> ] [-Group <String> ] [-JoinDomain <Boolean> ] [-PxePromptPolicy <PxePromptPolicy> ] [-ReferralServer <String> ] [-ResetAccount] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: UserAndJoinRightsDomain
Set-WdsClient -DeviceName <String> -Domain -JoinRights <JoinRights> -User <String> [-AsJob] [-BootImagePath <String> ] [-CimSession <CimSession[]> ] [-DeviceID <String> ] [-DomainName <String> ] [-Group <String> ] [-JoinDomain <Boolean> ] [-PxePromptPolicy <PxePromptPolicy> ] [-ReferralServer <String> ] [-ResetAccount] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: UserAndJoinRightsSearchForest
Set-WdsClient -DeviceName <String> -JoinRights <JoinRights> -SearchForest -User <String> [-AsJob] [-BootImagePath <String> ] [-CimSession <CimSession[]> ] [-DeviceID <String> ] [-Group <String> ] [-JoinDomain <Boolean> ] [-PxePromptPolicy <PxePromptPolicy> ] [-ReferralServer <String> ] [-ResetAccount] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

详细说明

The Set-WdsClient cmdlet modifies a pre-staged client device. Specify the client to modify by using its name. You can specify a client within AD DS domain of the server that runs Windows Deployment Services, within a specified domain, or anywhere in the current AD DS forest.

You can modify the following:

-- The device ID, which is a GUID, media access control (MAC) address, or Dynamic Host Configuration Protocol (DHCP) identifier associated with the computer.
-- A server that runs Windows Deployment Services. The client contacts this server for the network boot program and boot image.
-- Whether the client prompts the user to boot in the Pre-Boot Execution Environment (PXE).
-- A boot image for the client.
-- A Windows Deployment Services answer file for the client.
-- Whether the client joins a domain, the user account that joins the computer to the domain, and the join rights to granted to that user.

You can also reset the computer account, which allows anyone granted appropriate permissions to join the computer to the domain again.

参数

-AsJob

-BootImagePath<String>

Specifies a path to the boot image. This is the path to the boot image file for the computer.

-CimSession<CimSession[]>

在远程会话中或在远程计算机上运行 cmdlet。输入计算机名称或会话对象，例如 New-CimSession 或 Get-CimSession cmdlet 的输出。默认为本地计算机上的当前会话。

-DeviceID<String>

Specifies the ID of the computer. This identifier is the GUID of a network interface card, a MAC address, or a DHCP unique identifier associated with the computer.

-DeviceName<String>

Specifies the name of the computer associated with the pre-staged client. This is a sAMAccountName value.

-Domain

Indicates that the cmdlet refers to pre-staged clients within the domain specified by the DomainName parameter, instead of the domain of the server that runs Windows Deployment Services or the entire forest.

-DomainName<String>

Specifies a domain name. Specify a value for this parameter only if you specify the Domain parameter.

-Group<String>

Specifies the group name of the client associated with the pre-staged client.

-JoinDomain<Boolean>

Indicates whether to join the computer to a domain as the account specified by the User parameter.

-JoinRights<JoinRights>

Specifies the rights to assign to the account. 此参数可接受的值如下：

-- Full. Assigns full access rights, which includes the right to join the computer to the domain at any time.
-- JoinOnly. Requires the administrator to reset the computer account before the user can join the computer to the domain.

-PxePromptPolicy<PxePromptPolicy>

Specifies the prompt policy for this computer to boot in PXE. 此参数可接受的值如下：

-- Adopt
-- NoPrompt
-- OptIn
-- OptOut

-ReferralServer<String>

Specifies the name of a server. If you specify a referral server, the computer connects to this Windows Deployment Services server to download the network boot program and boot image by using Trivial File Transfer Protocol (TFTP).

-ResetAccount

Indicates that the cmdlet resets the permissions on the computer so that anyone granted appropriate permissions can join the domain using the account specified by the User parameter.

-SearchForest

Indicates that the cmdlet refers to pre-staged devices in the current AD DS forest. If you do not specify this parameter and do not specify the Domain parameter, the cmdlet looks for pre-staged devices in the local domain.

-ThrottleLimit<Int32>

指定可建立的用于运行此 cmdlet 的并发操作的最大数目。如果省略了此参数或输入了值 0，那么 Windows PowerShell® 将基于正在计算机上运行的 CIM cmdlet 的数目，计算 cmdlet 的最佳中止值。中止值仅适用于当前 cmdlet，而不适用于会话或计算机。

-User<String>

Specifies a user, in the format DOMAIN\User or User@Domain. If you specify a value of $True for the JoinDomain parameter, the cmdlet assigns the user the right to join the computer to the domain specified by the Domain parameter. To join the client computer to the specified domain without granting any user rights, specify a value of $True for the JoinDomain parameter, but do not specify a user.

-WdsClientUnattend<String>

Specifies an answer file as a relative path from the RemoteInstall share. This file contains information for the Windows Deployment Services client user interface screens, such as entering credentials, choosing an install image, and configuring the disk.

<CommonParameters>

此 cmdlet 支持通用参数：-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer 和 -OutVariable。有关详细信息，请参阅 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

输入

输入类型是指可通过管道传送给 cmdlet 的对象的类型。

输出

输出类型是 cmdlet 所发出对象的类型。

• Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsClient

示例

Example 1: Modify a pre-staged client in the current AD DS domain

This command modifies a pre-staged client named TSQA087. The command specifies a boot image file, a device ID, and a referral server. The command changes the prompt policy to opt-out. The command specifies the ResetAccount parameter, so the command resets permissions so that anyone granted appropriate permissions can join the domain. The command also specifies an answer file named Unattend.xml.

PS C:\> Set-WdsClient -DeviceName "TSQA087" -BootImagePath "boot\x86\images\Contosox86boot.wim" -DeviceID "5a7a1def-2e1f-4a7b-a792-ae5275b6ef92" -PxePromptPolicy OptOut -ReferralServer "WindowsDS07" -ResetAccount -WdsClientUnattend "WindowsDSClientUnattend\Unattend.xml"

Example 2: Modify a pre-staged client in the current AD DS domain

This command modifies a pre-staged client named TSQA103. The command specifies the Domain parameter to indicate that the client belongs a specified domain, named TSQA.Contoso.com. The command adds the client to the group named 2013Purchases. The command changes the prompt policy to no prompt. The command includes the JoinDomain parameter, so the computer joins adomain.

PS C:\> Set-WdsClient -DeviceName "TSQA103" -Domain -DomainName "TSQA.Contoso.com" -Group "2013Purchases" -JoinDomain $True -PxePromptPolicy NoPrompt

Example 3: Modify a pre-staged client in the current AD DS forest

This command modifies specifies a boot image file for the pre-staged client named TSQA108. The SearchForest parameter indicates the cmdlet can find that computer in any domain in the current AD DS forest.

PS C:\> Set-WdsClient -DeviceName "TSQA108" -SearchForest -BootImagePath "boot\x86\images\Contosox86boot.wim"

Example 4: Modify join rights and user

This command modifies a pre-staged client named TSQA117. The command specifies a user named TSQADOMAIN\PattiFuller, and assigns JoinOnly rights for that user. The command also specifies boot image and a referral server.

PS C:\> Set-WdsClient -DeviceName "TSQA117" -JoinRights JoinOnly -User "TSQADOMAIN\PattiFuller" -BootImagePath "boot\x86\images\Contosox86boot.wim" -ReferralServer "WindowsDS07"

Example 5: Modify join rights, user, and prompt policy

This command modifies a pre-staged client named TSQA121. The command specifies a user named TSQADOMAIN\PattiFuller Unlike the previous example, the command assigns the user full join rights. The command specifies opt-in as the prompt policy.

PS C:\> Set-WdsClient -DeviceName "TSQA121" -Domain -JoinRights Full -User "TSQADOMAIN\PattiFuller" -PxePromptPolicy OptIn

Example 6: Modify join rights, user, and prompt policy for a client in the current AD DS forest

This command modifies a pre-staged client named TSQA128. The SearchForest parameter indicates the cmdlet can find that computer could be in any domain in the current AD DS forest.

The command specifies a value of $True for the JoinDomain parameter, so the cmdlet joins the computer to a domain. The command specifies a user named TSQADOMAIN\PattiFuller, and assigns JoinOnly rights for that user. The command also specifies the ResetAccount parameter, so the command resets permissions so that anyone granted appropriate permissions can join the domain.

This command also assigns an ID to the client by using the DeviceID parameter. The command also specifies an answer file named Unattend.xml.

PS C:\> Set-WdsClient -DeviceName "TSQA128" -JoinRights JoinOnly -SearchForest -User "TSQADOMAIN\PattiFuller" -DeviceID "5a7a1def-2e1f-4a7b-a792-ae5275b6ef92" -JoinDomain $True -ResetAccount -WdsClientUnattend "WindowsDSClientUnattend\Unattend.xml"

相关主题

Approve-WdsClient

Deny-WdsClient

Get-WdsClient

New-WdsClient

Remove-WdsClient