Add-DhcpServerv4MulticastScope
Add-DhcpServerv4MulticastScope
Adds a multicast scope on the DHCP server.
語法
Parameter Set: Add0
Add-DhcpServerv4MulticastScope [-Name] <String> [-StartRange] <IPAddress> [-EndRange] <IPAddress> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Description <String> ] [-ExpiryTime <DateTime> ] [-LeaseDuration <TimeSpan> ] [-PassThru] [-State <String> ] [-ThrottleLimit <Int32> ] [-Ttl <UInt32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細描述
The Add-DhcpServerv4MulticastScope cmdlet adds a multicast scope on the Dynamic Host Configuration Protocol (DHCP) server.
參數
-AsJob
別名 |
無 |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
false |
接受萬用字元? |
false |
-CimSession<CimSession[]>
在遠端工作階段或遠端電腦上執行 Cmdlet。輸入電腦名稱或工作階段物件,例如 New-CimSession 或 Get-CimSession Cmdlet 的輸出。預設為本機電腦上的目前工作階段。
別名 |
Session |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
false |
接受萬用字元? |
false |
-ComputerName<String>
Specifies the DNS name or IP address of the target computer that runs the DHCP Server service.
別名 |
Cn |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
false |
接受萬用字元? |
false |
-Description<String>
Specifies a description of the multicast scope. The default value is null.
別名 |
無 |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
True (ByPropertyName) |
接受萬用字元? |
false |
-EndRange<IPAddress>
Specifies the end address of the range for the scope.
別名 |
無 |
必要? |
true |
位置? |
4 |
預設值 |
無 |
接受管線輸入? |
True (ByPropertyName) |
接受萬用字元? |
false |
-ExpiryTime<DateTime>
Specifies the expiry time of the multicast scope. The default value is infinite.
別名 |
無 |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
True (ByPropertyName) |
接受萬用字元? |
false |
-LeaseDuration<TimeSpan>
Specifies the duration of the IP address lease. The default value 30 days.
別名 |
無 |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
True (ByPropertyName) |
接受萬用字元? |
false |
-Name<String>
Specifies a name for the multicast scope.
別名 |
無 |
必要? |
true |
位置? |
2 |
預設值 |
無 |
接受管線輸入? |
True (ByPropertyName) |
接受萬用字元? |
false |
-PassThru
將表示您正在使用的項目的物件傳回。根據預設,此 Cmdlet 不會產生任何輸出。
別名 |
無 |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
false |
接受萬用字元? |
false |
-StartRange<IPAddress>
Specifies the start address of the range of IP addresses for the scope.
別名 |
無 |
必要? |
true |
位置? |
3 |
預設值 |
無 |
接受管線輸入? |
True (ByPropertyName) |
接受萬用字元? |
false |
-State<String>
Specifies the state of the scope. 此參數接受的值包括:
-- Active
-- Inactive
The default value is Active.
別名 |
無 |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
True (ByPropertyName) |
接受萬用字元? |
false |
-ThrottleLimit<Int32>
指定為執行此 Cmdlet 可建立的最大同時作業數。如果省略這個參數或輸入 0
的值,則 Windows PowerShell® 會根據在電腦上執行的 CIM Cmdlet 數目,計算 Cmdlet 的最佳節流限制。節流限制僅適用於目前 Cmdlet,不適用於工作階段或電腦。
別名 |
無 |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
false |
接受萬用字元? |
false |
-Ttl<UInt32>
Specifies the number of routers through which multicast traffic passes. The default value is 32.
別名 |
無 |
必要? |
false |
位置? |
named |
預設值 |
無 |
接受管線輸入? |
True (ByPropertyName) |
接受萬用字元? |
false |
-Confirm
執行 Cmdlet 之前先提示您確認。
必要? |
false |
位置? |
named |
預設值 |
false |
接受管線輸入? |
false |
接受萬用字元? |
false |
-WhatIf
顯示執行 Cmdlet 後會發生的情況。未執行 Cmdlet。
必要? |
false |
位置? |
named |
預設值 |
false |
接受管線輸入? |
false |
接受萬用字元? |
false |
<CommonParameters>
此 Cmdlet 支援一般參數:-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer 與 -OutVariable。如需詳細資訊,請參閱 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
輸入
輸入類型是您可以使用管線處理方式傳遞給 Cmdlet 的物件類型。
輸出
輸出類型是 Cmdlet 所發出的物件類型。
範例
Example 1: Add an inactive multicast scope
This command creates an inactive multicast scope named Multicast_AudioConference on the DHCP server named DhcpServer01.Contoso.com. The command specifies the lease duration of 20 days for allocating addresses to participants of audio conferences. You can allocate a single multicast address to multiple clients. The command specifies that the traffic passes through 20 routers.
PS C:\> Add-DhcpServerv4MulticastScope -ComputerName "DhcpServer01.Contoso.com" -Name "Multicast_AudioConference" -StartRange 224.0.0.0 -EndRange 224.0.0.30 -State Inactive -Ttl 20-LeaseDuration 20
Example 2: Add an active multicast scope
This command creates an active multicast scope named Multicast_AudioConference on the DHCP server named DhcpServer01.Contoso.com. You can use the multicast scope on the DHCP server service for allocating addresses to participants of video conferences. You can allocate a single multicast address to multiple clients. The traffic passes through 32 routers, and the lease duration is 30 days.
PS C:\> Add-DhcpServerv4MulticastScope -ComputerName "DhcpServer01.Contoso.com" -Name "Multicast_VideoConference" -StartRange 224.0.0.50 -EndRange 224.0.0.80
相關主題
Get-DhcpServerv4MulticastScope