本文件已封存並已停止維護。

Upgrading to DPM 2010 from DPM 2010 Eval When Using a Remote Instance of SQL Server

更新日期: 2010年7月

適用於: System Center Data Protection Manager 2010

Use the procedures in this topic to upgrade to System Center Data Protection Manager (DPM) 2010 from DPM 2010 Evaluation (Eval) when using a remote instance of SQL Server 2008 SP1.

Important重要事項
Before you upgrade DPM, we strongly recommend that you back up your DPM 2010 Eval database and store the backup file in a secure location. If your upgrade to DPM 2010 RTM does not complete successfully, or if you need to go back to DPM 2010 Eval, you can roll back the upgrade without losing the benefit of protection that you previously had.

To back up the DPM 2010 Eval database

  1. Log on to the computer where the remote instance of SQL Server 2008 SP1 is installed with a domain account that is a member of the local Administrators group and the SQL Server Sysadmin fixed server role.

  2. Open an elevated Command Prompt window, and then run the following commands:

    • cd <system drive> :\Program Files\Microsoft Data Protection Manager\DPM2010\SQLPrep

    • DPMBackup.exe –db –instanceName <instance name>

      where <instanceName> is the name of the instance of SQL Server for the DPM 2010 Eval database.


      note附註
      Do not include the computer name in the parameter <instanceName>.

    The DPM 2010 Eval database backup file DPMDB.bak is located at <system drive>:\<instanceName>\DPMBackup.

  3. Store the backup file in a secure location. If you need to roll back your upgrade, you can restore your DPM 2010 Eval database. For more information, see Rolling Back a DPM 2010 Upgrade.

  4. If you are installing the DPM 2010 RTM database on a different computer, copy the DPM 2010 Eval database backup file to that computer.

To restore the DPM 2010 Eval database to the DPM 2010 RTM database

  1. Install and configure a new named instance of SQL Server 2008 SP1, Standard or Enterprise Edition, on the remote computer to use as your DPM RTM database. For step-by-step instructions about how to install a remote instance of SQL Server 2008, see Installing a Remote Instance of SQL Server 2008.

  2. On the computer on which you installed a remote instance of SQL Server 2008 SP1, click Start, click All Programs, click Microsoft SQL Server 2008, right-click SQL Server Management Studio, and then click Run as administrator.

  3. In the Connect to Server dialog box, in the Server name box, type the computer name and instance name in the following format <Computer Name\Instance Name>, and then click Connect.

  4. Right-click the Databases folder, and then click Restore Database.

  5. In the Restore Database dialog box, do the following:

    1. In the Destination for restore area, in the To database list, select DPMDB.

    2. In the Source for restore area, click From device, and then click the ellipsis (...) button to the right of the box.

    3. In the Specify Backup dialog box, click Add, browse to the location of the DPM 2010 Eval database backup file, click it, and then click OK two times.

    4. In the Restore Database dialog box, in the Select the backup sets to restore list, select the Restore check box, and then click OK.


  6. After you have restored the database, you must synchronize the database. To synchronize the database, in DPM Management Shell or an elevated Command Prompt window, run the following command:
    dpmsync –sync

Preparing to Upgrade to DPM 2010 from DPM 2010 Eval When Using a Remote Instance of SQL Server

Before you upgrade DPM, do the following:

  • If you are sharing a tape library across multiple servers that are running System Center Data Protection Manager (DPM) 2010, you must remove library sharing before you upgrade DPM. For step-by-step instructions for removing library sharing, see Removing Library Sharing.

  • Before you upgrade DPM, ensure that the domain user account you will use to install DPM 2010 is a member of all the following:

    • The local Administrators group on the DPM server

    • The local Administrators group on the computer on which you will install the remote instance of SQL Server 2008 SP1

    • The SQL Server Sysadmin fixed server role on the computer on which you have installed the remote instance of SQL Server 2008 SP1.

      note附註
      After setup is complete, you can remove the user account from the local Administrators group on the computer that is running the remote instance of SQL Server.

  • Verify the following:

Upgrading a DPM Server That Uses a Remote Instance of SQL Server

Use the following procedure to upgrade a DPM server that uses a remote instance of SQL Server.

To upgrade a DPM server that uses a remote instance of SQL Server

  1. Log on to the DPM server with a domain user account that is a member of all the following:

    • The local Administrators group on the DPM server

    • The local Administrators group on the computer running the remote instance of SQL Server

    • The SQL Server Sysadmin fixed server role on the computer running the remote instance of SQL Server

    note附註
    After setup is complete, you can remove the user account from the local Administrators group on the computer running the remote instance of SQL Server.

  2. On the computer where your DPM 2010 Eval server is installed, insert the DPM product DVD in the DVD-ROM drive. If the DPM Setup Wizard does not start automatically, double-click setup.exe in the root folder of the DVD.

    –Or–

    If you are installing DPM from a network share, navigate to the installation share, and then double-click setup.exe in the root folder of the share.

    Important重要事項
    If you use a network share to install DPM, you should apply the appropriate security to the share to ensure that no unauthorized or unauthenticated users can access or alter the contents of the share.

  3. On the Microsoft System Center Data Protection Manager 2010 screen, click Install Data Protection Manager.

  4. On the Microsoft Software License Terms page, review the license agreement. If you accept the terms, click I accept the license terms and conditions, and then click OK.

  5. On the Welcome page, read the informational notes, and then click Next.

    DPM begins a prerequisites check for all required hardware and software.

  6. On the Prerequisites Check page, wait while DPM Setup checks the system to verify that it meets the software and hardware requirements.

    If all required components are present, DPM Setup displays a confirmation. Click Next to continue.

    If one or more required or recommended components are missing or noncompliant, Setup displays a warning or error message.

    note附註
    On the Prerequisites Installation page, DPM Setup installs any prerequisite software required for setup. The DPM Setup Wizard will indicate if a restart is required to complete the installation. If a restart is required, restart the DPM server, and then run DPM Setup again.

  7. On the Product Registration page, enter a user name, company name, and a valid product key, and then in the Protection agent licenses area, do the following:

    1. In the Standard licenses box, type the number of licenses that you have purchased to authorize protection of file resources and system state.

    2. In the Enterprise licenses box, type the number of licenses that you have purchased to authorize protection of both file and application resources.

    3. In the Client licenses box, type the number of licenses that you have purchased to authorize protection of client computers (portable computers and desktop computers).

    note附註
    If you purchase additional licenses after you set up DPM or reallocate licenses from one DPM server to another, you can update the number of available licenses for each DPM server in DPM Administrator Console. For information about updating your protection agent licenses, in DPM 2010 Help, see How to Update DPM License Information (http://go.microsoft.com/fwlink/?LinkId=196896).

  8. On the Installation Settings page, the installation location defaults to the installation location of DPM 2010 Eval, which cannot be changed, and the instance of SQL Server defaults to the existing instance option, which cannot be changed. Click Next.

  9. On the SQL Settings page, in the Instance of SQL Server box, type the name of the new remote SQL Server instance as <Computer Name>\<Instance Name>, and then type the credentials for a domain user account that is a member of both the local Administrators group and the SQL Server Sysadmin fixed server role on the computer where the remote instance is installed.

    note附註
    After setup is complete, you can remove the user account from the local Administrators group on the computer where the remote instance is installed.

  10. On the Security Settings page, specify and then confirm a strong password for the restricted MICROSOFT$DPM$Acct and DPMR$<computer name> local user accounts, and then click Next.

    For security purposes, DPM runs SQL Server and the SQL Server Agent services under the MICROSOFT$DPM$Acct account, which DPM Setup creates during the DPM installation. To securely generate reports, DPM creates the DPMR$<computer name> account.

  11. On the Microsoft Update Opt-In page, specify if you want to sign up for the Microsoft Update service, and then click Next.

  12. On the Customer Experience Improvement Program page, specify if you want to enlist in the Customer Experience Improvement Program (CEIP), and then click Upgrade.

    You can change your CEIP settings at any time by using DPM Administrator Console. In the Selected Items area of any task area, click Options, click the Customer Feedback tab, and then select an option.

  13. After the installation is complete, the Installation page displays the installation status.

  14. Click Close, and then restart the computer.

    Important重要事項
    You must restart the computer to incorporate all of the DPM Setup changes.

  15. You can uninstall the DPM 2010 Eval instance of SQL Server because it is not required for DPM 2010 RTM.

  16. Complete the post-installation tasks described in After Upgrading to DPM 2010.

另請參閱

顯示: