Remove-VMNetworkAdapterAcl

Remove-VMNetworkAdapterAcl

Removes an ACL applied to the traffic through a virtual network adapter.

語法

Parameter Set: VMName
Remove-VMNetworkAdapterAcl [-VMName] <String[]> -Action <VMNetworkAdapterAclAction> {Allow | Deny | Meter} -Direction <VMNetworkAdapterAclDirection> {Inbound | Outbound | Both} [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-LocalIPAddress <String[]> ] [-LocalMacAddress <String[]> ] [-Passthru] [-RemoteIPAddress <String[]> ] [-RemoteMacAddress <String[]> ] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObjectParameter
Remove-VMNetworkAdapterAcl [-InputObject] <VMNetworkAdapterAclSetting[]> [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ManagementOS
Remove-VMNetworkAdapterAcl -Action <VMNetworkAdapterAclAction> {Allow | Deny | Meter} -Direction <VMNetworkAdapterAclDirection> {Inbound | Outbound | Both} -ManagementOS [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-LocalIPAddress <String[]> ] [-LocalMacAddress <String[]> ] [-Passthru] [-RemoteIPAddress <String[]> ] [-RemoteMacAddress <String[]> ] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ResourceObject
Remove-VMNetworkAdapterAcl [-VMNetworkAdapter] <VMNetworkAdapterBase[]> -Action <VMNetworkAdapterAclAction> {Allow | Deny | Meter} -Direction <VMNetworkAdapterAclDirection> {Inbound | Outbound | Both} [-LocalIPAddress <String[]> ] [-LocalMacAddress <String[]> ] [-Passthru] [-RemoteIPAddress <String[]> ] [-RemoteMacAddress <String[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: VMObject
Remove-VMNetworkAdapterAcl [-VM] <VirtualMachine[]> -Action <VMNetworkAdapterAclAction> {Allow | Deny | Meter} -Direction <VMNetworkAdapterAclDirection> {Inbound | Outbound | Both} [-LocalIPAddress <String[]> ] [-LocalMacAddress <String[]> ] [-Passthru] [-RemoteIPAddress <String[]> ] [-RemoteMacAddress <String[]> ] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細描述

The Remove-VMNetworkAdapterAcl cmdlet removes an ACL applied to the traffic through a virtual network adapter.

參數

-Action<VMNetworkAdapterAclAction>

Specifies the action of the ACL to be removed. Allowed values are Allow, Deny, and Meter.

-CimSession<Microsoft.Management.Infrastructure.CimSession[]>

在遠端工作階段或遠端電腦上執行 Cmdlet。輸入電腦名稱或工作階段物件，例如 New-CimSession 或 Get-CimSession Cmdlet 的輸出。預設為本機電腦上目前的工作階段。

-ComputerName<String[]>

Specifies one or more Hyper-V hosts on which the ACL applied to a virtual machine network adapter is to be removed. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.

-Credential<System.Management.Automation.PSCredential[]>

Specifies one or more user accounts that have permission to perform this action. The default is the current user.

-Direction<VMNetworkAdapterAclDirection>

The direction of the network traffic (from the perspective of the virtual machine) to which the ACL applies. Allowed values are Inbound, Outbound, or Both.

-InputObject<VMNetworkAdapterAclSetting[]>

Specifies the ACL to be removed.

-LocalIPAddress<String[]>

Specifies the local IP address. It can be either IPv4 or IPv6 address. It can be either a host address or a subnet address, e.g. 1.2.3.4, 2001::2008, 192.168.1.0/24, or f001:f002:f003:f004::1/64.the IP address can also be a wildcard, 0.0.0.0/0 for all IPv4 addresses, ::/0 for all IPv6 addresses, or ANY for all IPv4 and IPv6 addresses.

-LocalMacAddress<String[]>

Specifies the local MAC address (e.g. 00-ab-00-11-22-33). Use the wildcard ANY to specify all MAC addresses.

-ManagementOS

Specifies that the ACL is to be removed from the management (e.g. the parent, or host) operating system.

-Passthru

Specifies that a Microsoft.HyperV.PowerShell.VMNetworkAdapterAclSetting object is to be passed through to the pipeline representing the ACL to be removed.

-RemoteIPAddress<String[]>

Specifies the remote IP address. . It can be either IPv4 or IPv6 address. It can be either a host address or a subnet address, e.g. 1.2.3.4, 2001::2008, 192.168.1.0/24, or f001:f002:f003:f004::1/64. the IP address can also be a wildcard, 0.0.0.0/0 for all IPv4 addresses, ::/0 for all IPv6 addresses, or ANY for all IPv4 and IPv6 addresses.

-RemoteMacAddress<String[]>

Specifies the remote MAC address. . It can be a host MAC address, e.g. 00-ab-00-11-22-33, or a wildcard, ANY, for all MAC addresses.

-VM<VirtualMachine[]>

Specifies the virtual machine from which the ACL is to be removed.

-VMName<String[]>

Specifies the name of the virtual machine from which the ACL is to be removed.

-VMNetworkAdapter<VMNetworkAdapterBase[]>

Specifies the virtual machine network adapter from which ACL is to be removed.

-VMNetworkAdapterName<String>

Specifies the name of the virtual machine network adapter from which the ACL is to be removed.

-Confirm

在執行指令程式之前提示您確認。

-WhatIf

示範當執行指令程式時會發生什麼事情。此指令程式並未執行。

<CommonParameters>

這個指令程式支援一般參數：-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer 和 -OutVariable。如需詳細資訊，請參閱 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

輸入

輸入類型是可透過管道傳送至指令程式的物件類型。

輸出

輸出類型是指令程式所發出的物件類型。

• None by default, Microsoft.HyperV.PowerShell.VMNetworkAdapterAclSetting if –PassThru is specified.

範例

Example 1

Removes from virtual machine Redmond the ACL allowing any IPv4 traffic sent from or to the virtual machine.

PS C:\> Remove-VMNetworkAdapterAcl -VMName Redmond -RemoteIPAddress 0.0.0.0/0 -Direction Both -Action Allow

Example 2

Removes from virtual machine Redmond the ACL that allows any IPv6 traffic sent from and to the virtual machine.

PS C:\> Remove-VMNetworkAdapterAcl –VMName Redmond -RemoteIPAddress ::/0 -Direction Both -Action Allow

Example 3

Removes the MAC ACL to prevent virtual machine Redmond from sending traffic to or receiving traffic from a remote device with MAC address 03-0f-01-0e-aa-b2.

PS C:\> Remove-VMNetworkAdapterAcl -VMName Redmond -RemoteMacAddress 03-0f-01-0e-aa-b2 -Direction Both -Action Deny

Example 4

Retrieves all the port ACLs configured for virtual machine Redmond and pipelines them to Remove-VMNetworkAdapterAcl, which removes all of them from the virtual machine.

PS C:\> Get-VMNetworkAdapterAcl -VMName Redmond | Remove-VMNetworkAdapterAcl