Set-VMHardDiskDrive

Set-VMHardDiskDrive

Configures a virtual hard disk.

語法

Parameter Set: VMName
Set-VMHardDiskDrive [-VMName] <String> [[-ControllerType] <ControllerType> {IDE | SCSI} ] [[-ControllerNumber] <Int32]> ] [[-ControllerLocation] <Int32]> ] [[-Path] <String> ] [-AllowUnverifiedPaths] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-DiskNumber <UInt32> ] [-MaximumIOPS <UInt64]> ] [-MinimumIOPS <UInt64]> ] [-Passthru] [-QoSPolicy <Microsoft.Management.Infrastructure.CimInstance> ] [-QoSPolicyID <System.String> ] [-ResourcePoolName <String> ] [-SupportPersistentReservations <Boolean]> ] [-ToControllerLocation <Int32]> ] [-ToControllerNumber <Int32]> ] [-ToControllerType <ControllerType]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Object
Set-VMHardDiskDrive [-VMHardDiskDrive] <HardDiskDrive[]> [[-Path] <String> ] [-AllowUnverifiedPaths] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-DiskNumber <UInt32> ] [-MaximumIOPS <UInt64]> ] [-MinimumIOPS <UInt64]> ] [-Passthru] [-QoSPolicy <Microsoft.Management.Infrastructure.CimInstance> ] [-QoSPolicyID <System.String> ] [-ResourcePoolName <String> ] [-SupportPersistentReservations <Boolean]> ] [-ToControllerLocation <Int32]> ] [-ToControllerNumber <Int32]> ] [-ToControllerType <ControllerType]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細描述

The Set-VMHardDiskDrive cmdlet configures a virtual hard disk.

參數

-CimSession<Microsoft.Management.Infrastructure.CimSession[]>

在遠端工作階段或遠端電腦上執行 Cmdlet。輸入電腦名稱或工作階段物件，例如 New-CimSession 或 Get-CimSession Cmdlet 的輸出。預設為本機電腦上目前的工作階段。

-ComputerName<String[]>

Specifies one or more Hyper-V hosts on which the virtual hard drive is to be configured. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.

-ControllerLocation<Int32]>

Specifies the number of the location on the controller to which the virtual hard drive to be configured is attached. If not specified, all hard drives are configured.

-ControllerNumber<Int32]>

Specifies the number of the controller to which the virtual hard drive to be configured is attached. If not specified, all hard drives are configured.

-ControllerType<ControllerType>

Specifies the type of the controller to which the virtual hard drive to be configured is attached. Allowed values are Floppy, IDE, and SCSI.

-Credential<System.Management.Automation.PSCredential[]>

Specifies one or more user accounts that have permission to perform this action. The default is the current user.

-Passthru

Specifies that a Microsoft.HyperV.PowerShell.HardDiskDrive object is to be passed through to the pipeline representing the virtual hard drive to be configured.

-Path<String>

Specifies the path to media the virtual hard disk is to use.

-QoSPolicy<Microsoft.Management.Infrastructure.CimInstance>

Specifies the storage Quality of Service (QoS) policy to associate with the hard disk drive.

-QoSPolicyID<System.String>

Specifies the ID for a storage QoS policy to associate with the hard disk drive.

-ResourcePoolName<String>

Specifies the name of the virtual hard disk resource pool to which this drive belongs.

-SupportPersistentReservations<Boolean]>

Indicates whether the hard disk supports SCSI persistent reservation semantics. Specify this parameter when the hard disk is a shared disk that is used by multiple virtual machines.

-VMHardDiskDrive<HardDiskDrive[]>

Specifies one or more hard disks to be configured.

-AllowUnverifiedPaths

Specifies that no error is to be thrown if the specified path is not verified as accessible by the cluster. This parameter is applicable to clustered virtual machines.

-DiskNumber<UInt32>

Specifies the disk number of the offline physical hard drive that should be connected as a passthrough disk.

-MaximumIOPS<UInt64]>

Specifies the maximum normalized I/O operations per second (IOPS) for the hard disk. Hyper-V calculates normalized IOPS as the total size of I/O per second divided by 8 KB.

-MinimumIOPS<UInt64]>

Specifies the minimum normalized I/O operations per second (IOPS) for the hard disk. Hyper-V calculates normalized IOPS as the total size of I/O per second divided by 8 KB.

-ToControllerLocation<Int32]>

Specifies the controller location to which this drive should be moved. Allowed values are 0 and 1 for IDE controllers, and from 0 to 63 for SCSI controllers.

-ToControllerNumber<Int32]>

Specifies the controller location to which this drive should be moved. Allowed values are 0 and 1 for IDE controllers, and from 0 to 3 for SCSI controllers.

-ToControllerType<ControllerType]>

Specifies the type of controller to which this drive should be moved. Allowed values are IDE and SCSI.

-VMName<String>

Specifies the name of the virtual machine on which the virtual hard drive is to be configured.

-Confirm

在執行指令程式之前提示您確認。

-WhatIf

示範當執行指令程式時會發生什麼事情。此指令程式並未執行。

<CommonParameters>

這個指令程式支援一般參數：-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer 和 -OutVariable。如需詳細資訊，請參閱 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

輸入

輸入類型是可透過管道傳送至指令程式的物件類型。

輸出

輸出類型是指令程式所發出的物件類型。

範例

Example 1

Configures the hard drive of virtual machine TestVM to use Test.vhd as its media.

PS C:\> Set-VMHardDiskDrive -VMName TestVM -Path .\Test.vhd

Example 2

Moves the virtual hard drive on virtual machine TestVM from IDE 1,0 to IDE 1,1.

PS C:\> Get-VMHardDiskDrive -VMName TestVM –ControllerType IDE -ControllerNumber 1 -ControllerLocation 0 | Set-VMHardDiskDrive -ToControllerLocation 1