Set-IpamAddress
Set-IpamAddress
Modifies an IP address in IPAM.
Syntax
Parameter Set: ByAddress
Set-IpamAddress [-IpAddress] <IPAddress[]> [[-ManagedByService] <String[]> ] [[-ServiceInstance] <String[]> ] [-AddCustomConfiguration <String> ] [-AddressSpace <String[]> ] [-AsJob] [-AssetTag <String> ] [-AssignmentDate <DateTime> ] [-AssignmentType <AddressAssignment> ] [-CimSession <CimSession[]> ] [-ClientId <String> ] [-Description <String> ] [-DeviceName <String> ] [-DeviceType <String> ] [-Duid <String> ] [-ExpiryDate <DateTime> ] [-ForwardLookupPrimaryServer <String> ] [-ForwardLookupZone <String> ] [-Iaid <UInt32> ] [-IpAddressState <String> ] [-MacAddress <String> ] [-NetworkType <VirtualizationType[]> ] [-NewAddressSpace <String> ] [-NewIPAddress <IPAddress> ] [-NewManagedByService <String> ] [-NewNetworkType <VirtualizationType> ] [-NewServiceInstance <String> ] [-Owner <String> ] [-PassThru] [-RemoveCustomConfiguration <String> ] [-ReservationDescription <String> ] [-ReservationName <String> ] [-ReservationServer <String> ] [-ReservationType <DhcpReservationType> ] [-ReverseLookupPrimaryServer <String> ] [-ReverseLookupZone <String> ] [-SerialNumber <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Set-IpamAddress -InputObject <CimInstance[]> [-AddCustomConfiguration <String> ] [-AsJob] [-AssetTag <String> ] [-AssignmentDate <DateTime> ] [-AssignmentType <AddressAssignment> ] [-CimSession <CimSession[]> ] [-ClientId <String> ] [-Description <String> ] [-DeviceName <String> ] [-DeviceType <String> ] [-Duid <String> ] [-ExpiryDate <DateTime> ] [-ForwardLookupPrimaryServer <String> ] [-ForwardLookupZone <String> ] [-Iaid <UInt32> ] [-IpAddressState <String> ] [-MacAddress <String> ] [-NewAddressSpace <String> ] [-NewIPAddress <IPAddress> ] [-NewManagedByService <String> ] [-NewNetworkType <VirtualizationType> ] [-NewServiceInstance <String> ] [-Owner <String> ] [-PassThru] [-RemoveCustomConfiguration <String> ] [-ReservationDescription <String> ] [-ReservationName <String> ] [-ReservationServer <String> ] [-ReservationType <DhcpReservationType> ] [-ReverseLookupPrimaryServer <String> ] [-ReverseLookupZone <String> ] [-SerialNumber <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Detaillierte Beschreibung
The Set-IpamAddress cmdlet modifies an IP address in IP Address Management (IPAM). Specify the IP addresses to modify or use the InputObject parameter to specify an IpamAddress object to modify.
You can use the cmdlet to associate the Dynamic Host Configuration Protocol (DHCP) reservation properties with the IP address. The cmdlet does not create a reservation on the DCHP server. You can use Windows PowerShell for DHCP Server to create a reservation on the DCHP server.
Parameter
-AddCustomConfiguration<String>
Specifies semi-colon separated name/value pairs of custom metadata. The cmdlet adds the custom configuration metadata to the IP addresses.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-AddressSpace<String[]>
Specifies the address space that is associated with the IP address. The default value is Default.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-AsJob
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-AssetTag<String>
Specifies the asset tag associated with the IP address.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-AssignmentDate<DateTime>
Specifies the date on which you assigned the IP address to a device.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-AssignmentType<AddressAssignment>
Specifies how IPAM assigns the addresses. The default value is Static. Die folgenden Werte für diesen Parameter sind zulässig:
-- Static
-- Dynamic
-- Auto
-- VIP
-- Reserved
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-CimSession<CimSession[]>
Führt das Cmdlet in einer Remotesitzung oder auf einem Remotecomputer aus. Geben Sie einen Computernamen oder ein Sitzungsobjekt ein, z. B. die Ausgabe eines Cmdlets New-CimSession oder Get-CimSession. Der Standardwert ist die aktuelle Sitzung auf dem lokalen Computer.
Aliasse |
Session |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-ClientId<String>
Specifies the ID of the IPAM client.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-Description<String>
Specifies a description of the IP address assignment for a device.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-DeviceName<String>
Specifies the name of the device to which you assigned the address.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-DeviceType<String>
Specifies the type of device to which you assigned the address. Specify a value that exists in the built-in custom field DeviceType. Die folgenden Werte für diesen Parameter sind zulässig:
-- VM
-- Host
The default value is Host.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-Duid<String>
Specifies the DHCP device unique identifier (DUID) for the client. Clients use the DUID to get an IP address from a DHCPv6 server.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ExpiryDate<DateTime>
Specifies an expiry date for the address. IPAM alerts the administrator when the IP address expires. IPAM does not reclaim expired addresses automatically.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ForwardLookupPrimaryServer<String>
Specifies the name of the DNS server that IPAM uses to resolve host names to IP addresses.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ForwardLookupZone<String>
Specifies the name of the forward look up zone that contains mapping of host names to IP addresses.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-Iaid<UInt32>
Specifies the identity association ID (IAID) of an IPv6 address.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-InputObject<CimInstance[]>
Gibt die Eingabe für dieses Cmdlet an. Sie können diesen Parameter verwenden oder die Eingabe über die Pipeline an dieses Cmdlet übergeben.
Aliasse |
Keiner |
Erforderlich? |
true |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByValue) |
Platzhalterzeichen akzeptieren? |
false |
-IpAddress<IPAddress[]>
Specifies an array of IP addresses.
Aliasse |
Keiner |
Erforderlich? |
true |
Position? |
2 |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-IpAddressState<String>
Specifies the usage state of the IP address. By default, the cmdlet sets the address as In-Use.
You can specify a valid custom value for this parameter. Use the Add-IpamCustomValue cmdlet to add a custom value to a custom field in IPAM.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-MacAddress<String>
Specifies the media access control (MAC) address of the device to which the address is assigned.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ManagedByService<String[]>
Specifies the name of the service that manages the IP address. The value that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.
You can use the Add-IpamCustomValue cmdlet to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue cmdlet to remove a value from the ManagedByService custom field in IPAM.
Aliasse |
MB |
Erforderlich? |
false |
Position? |
3 |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-NetworkType<VirtualizationType[]>
Specifies the network type of the address. Die folgenden Werte für diesen Parameter sind zulässig:
-- Provider
-- Customer
-- NonVirtualized
The default value is NonVirtualized.
If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-NewAddressSpace<String>
Specifies the name of the new address space for the IP addresses.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-NewIPAddress<IPAddress>
Specifies an IP address. The cmdlet assigns the new IP address to the IP addresses.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-NewManagedByService<String>
Specifies a new value for the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the MangedByService custom field in IPAM.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-NewNetworkType<VirtualizationType>
Specifies a new value for network type for the IP addresses. You can change the network type from NonVirtualized to Provider, and from Provider to NonVirtualized. You cannot be change the network type from NonVirtualized or Provider to Customer.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-NewServiceInstance<String>
Specifies a new value for the instance of the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-Owner<String>
Specifies the name of the owner of the IP addresses.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-PassThru
Gibt ein Objekt zurück, das das Element darstellt, mit dem Sie arbeiten. Standardmäßig wird von diesem Cmdlet keine Ausgabe generiert.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-RemoveCustomConfiguration<String>
Specifies a semi-colon separated string of custom field names. The cmdlet removes the custom field names from the IP addresses.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-ReservationDescription<String>
Specifies a description for the DCHP reservation.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ReservationName<String>
Specifies the name of the reservation on the DHCP server for the device. You must specify a value for this parameter if you specify the ReservationServer parameter.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ReservationServer<String>
Specifies the DHCP server on which the reservation is assigned. The cmdlet stores the reservation data in IPAM. The cmdlet does not create a reservation on the DHCP server.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ReservationType<DhcpReservationType>
Specifies the protocols supported by the reservation. You must specify a value for this parameter if you specify the ReservationServer parameter. Die folgenden Werte für diesen Parameter sind zulässig:
-- DHCP
-- BootPr
-- DHCP and BootPr
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ReverseLookupPrimaryServer<String>
Specifies the DNS server that IPAM uses to resolve IP addresses to host names.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ReverseLookupZone<String>
Specifies the reverse lookup zone that contains mapping from IP addresses to fully qualified domain names (FQDN).
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-SerialNumber<String>
Specifies the serial number of the device to which you assigned the address.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ServiceInstance<String[]>
Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the services that you specified for the ManagedByService parameter. If you specify this parameter, you must specify the IpAddress parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance parameter.
Aliasse |
SI |
Erforderlich? |
false |
Position? |
4 |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ThrottleLimit<Int32>
Gibt die maximale Anzahl von gleichzeitigen Vorgängen an, die zum Ausführen dieses Cmdlets eingerichtet werden können. Wenn dieser Parameter ausgelassen oder der Wert 0
eingegeben wird, berechnet Windows PowerShell® einen optimalen Drosselungsgrenzwert für das Cmdlet basierend auf der Anzahl der CIM-Cmdlets, die auf dem Computer ausgeführt werden. Die Drosselungsgrenze gilt nur für das aktuelle Cmdlet und nicht für die Sitzung oder den Computer.
Aliasse |
Keiner |
Erforderlich? |
false |
Position? |
named |
Standardwert |
Keiner |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-Confirm
Sie werden vor dem Ausführen des Cmdlets zur Bestätigung aufgefordert.
Erforderlich? |
false |
Position? |
named |
Standardwert |
falsch |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-WhatIf
Zeigt, was geschieht, wenn das Cmdlet ausgeführt wird. Das Cmdlet wird nicht ausgeführt.
Erforderlich? |
false |
Position? |
named |
Standardwert |
falsch |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
<CommonParameters>
Dieses Cmdlet unterstützt die allgemeinen Parameter: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable. Weitere Informationen finden Sie unter about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Eingaben
Der Eingabetyp ist der Typ der Objekte, die über die Pipeline an das Cmdlet übergeben werden können.
Ausgaben
Der Ausgabetyp ist der Typ der Objekte, die vom Cmdlet ausgegeben werden.
IpamAddress
Represents an IP Address on the IPAM server.
Beispiele
Example 1: Reassign an IP address
This command gets an IpamAddress object that contains the IP address 172.16.10.10 that is managed by IPAM. The command passes the IpamAddress object to the Set-IpamAddress cmdlet by using the pipeline operator. The Set-IpamAddress cmdlet changes the service that manages the IP address to VMM, and changes the instance of the service that manages the IP address to vmm1.contoso.com. The command assigns the address to the VM device type.
PS C:\> Get-IpamAddress -IpAddress 172.16.10.10 | Set-IpamAddress -NewManagedByService "VMM" -NewServiceInstance "vmm1.contoso.com" -DeviceType "VM" -PassThru
Example 2: Add custom metadata to an IP address
This command adds custom metadata to the IP address 172.16.10.10. The command adds the value Main to the custom field named ADSite.
PS C:\> Get-IpamAddress -IpAddress 172.16.10.10 | Set-IpamAddress -AddCustomConfiguration "ADSite=Main"
Example 3: Convert the network type of an IP address from non-virtualized to provider
This command converts the network type of the IP address 172.16.10.10 from non-virtualized to provider. The command assigns the provider address to the default provider address space.
PS C:\> Set-IpamAddress -IpAddress 172.16.10.10 -AddressSpace "Default" -NetworkType NonVirtualized -NewNetworkType Provider
Example 4: Convert the network type of an IP address from provider to non-virtualized
This command converts the network type of the IP address 172.16.10.10 from provider to non-virtualized. By default, the command assigns the non-virtualized address to the Default address space. The command passes the output to the Format-List cmdlet by using the pipeline operator, and formats the output as a table. For more information, type Get-Help Format-List
.
PS C:\> Set-IpamAddress -IpAddress 172.16.10.10 -NetworkType Provider -NewNetworkType NonVirtualized -PassThru | Format-List IpAddress, NetworkType, ProviderAddressSpace, CustomerAddressSpace
Example 5: Assign an IP address to a new address space
This command converts the network type of the IP address 172.16.10.10 from non-virtualized to provider. The command assigns the IP address to the provider address space named MainDataCenter. The command passes the output to the Format-List cmdlet by using the pipeline operator, and formats the output as a table.
PS C:\> Set-IpamAddress -IpAddress 172.16.10.10 -NetworkType NonVirtualized -NewNetworkType Provider -NewAddressSpace MainDataCenter -PassThru | Format-List IpAddress, NetworkType, ProviderAddressSpace, CustomerAddressSpace