Set-VmNetworkAdapterIsolation

Set-VmNetworkAdapterIsolation

Modifies isolation settings for a virtual network adapter.

Sintaxis

Parameter Set: VMName
Set-VmNetworkAdapterIsolation [-VMName] <String[]> [-AllowUntaggedTraffic <Boolean> ] [-ComputerName <String[]> ] [-DefaultIsolationID <Int32> ] [-IsolationMode <VMNetworkAdapterIsolationMode> ] [-MultiTenantStack <OnOffState> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ManagementOS
Set-VmNetworkAdapterIsolation -ManagementOS [-AllowUntaggedTraffic <Boolean> ] [-ComputerName <String[]> ] [-DefaultIsolationID <Int32> ] [-IsolationMode <VMNetworkAdapterIsolationMode> ] [-MultiTenantStack <OnOffState> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ResourceObject
Set-VmNetworkAdapterIsolation [-VMNetworkAdapter] <VMNetworkAdapterBase[]> [-AllowUntaggedTraffic <Boolean> ] [-DefaultIsolationID <Int32> ] [-IsolationMode <VMNetworkAdapterIsolationMode> ] [-MultiTenantStack <OnOffState> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: VMObject
Set-VmNetworkAdapterIsolation [-VM] <VirtualMachine[]> [-AllowUntaggedTraffic <Boolean> ] [-DefaultIsolationID <Int32> ] [-IsolationMode <VMNetworkAdapterIsolationMode> ] [-MultiTenantStack <OnOffState> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Descripción detallada

The Set-VmNetworkAdapterIsolation cmdlet modifies isolation settings for a virtual network adapter. You can isolate a virtual machine adapter by using virtual local area network (VLAN), Hyper-V Network Virtualization or a third party virtualization solution. You can specify the isolation method and modify other settings, which include multitenancy settings. For more information about multitenancy, see the Add-VmNetworkAdapterRoutingDomainMapping cmdlet.

Parámetros

-AllowUntaggedTraffic<Boolean>

Indicates whether the virtual machine sends and receives untagged traffic.

-ComputerName<String[]>

Specifies an array of Hyper-V hosts. The cmdlet modifies isolation settings for virtual machines hosted by the computers that you specify.

-DefaultIsolationID<Int32>

Specifies the ID of the network for traffic to the default compartment on virtual machines that have multitenancy enabled.

-IsolationMode<VMNetworkAdapterIsolationMode>

Specifies the isolation mode for the adapter. Los valores aceptables para este parámetro son los siguientes:

-- NativeVirtualSubnet. Hyper-V Network Virtualization.
-- ExternalVirtualSubnet. A third party network virtualization solution.
-- VLAN.
-- None.

If you specify a value of None, the network adapter uses its default isolation mode. Set the default isolation mode by using the Set-VMNetworkAdapterVlan cmdlet or the Set-VMNetworkAdapter cmdlet.

-ManagementOS

Indicates that the cmdlet operates on the parent or host operating system. If you specify this parameter, this cmdlet modifies isolation settings for the parent or host operating system.

-MultiTenantStack<OnOffState>

Specifies whether to use multiple isolation IDs for the virtual machine. Los valores aceptables para este parámetro son los siguientes:

-- On. Indicate isolation IDs so that the virtual machine provides services to multiple tenants on different isolation subnets.
-- Off. Do not indicate isolation IDs to virtual machine.

-Passthru

Devuelve un objeto que representa el elemento con el que está trabajando. De forma predeterminada, este cmdlet no genera ningún resultado.

-VM<VirtualMachine[]>

Specifies an array of virtual machine objects. The cmdlet modifies isolation settings for adapters that belong to the virtual machines that you specify. To obtain a virtual machine object, use the Get-VM cmdlet.

-VMName<String[]>

Specifies an array of names of virtual machines. The cmdlet modifies isolation settings for adapters that belong to the virtual machines that you specify.

-VMNetworkAdapter<VMNetworkAdapterBase[]>

Specifies an array VM network adapters as VMNetworkAdapterBase objects. The cmdlet modifies isolation settings for the adapters that you specify. To obtain a network adapter, use the Get-VMNetworkAdapter cmdlet.

-VMNetworkAdapterName<String>

Specifies the name of a virtual network adapter. The cmdlet modifies isolation settings for the adapters that you specify.

-Confirm

Solicita confirmación antes de ejecutar el cmdlet.

-WhatIf

Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.

<CommonParameters>

Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Entradas

El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.

• None

Salidas

El tipo de resultado es el tipo de objetos que emite el cmdlet.

• Microsoft.HyperV.PowerShell.VMNetworkAdapterIsolation

Ejemplos

Example 1: Set isolation mode for a virtual machine

This command sets the isolation mode of the virtual machine named TSQA01 to NativeVirtualSubnet, which indicates Hyper-V Network Virtualization. The virtual machine does not accept untagged traffic, but the MultitenantStack parameter has a value of On, so the virtual machine can provide services to multiple tenants.

PS C:\> Set-VMNetworkAdapterIsolation -VMName "TSQA01" -AllowUntaggedTraffic $False -IsolationMode NativeVirtualSubnet -MultiTenantStack On

Example 2: Set isolation mode and untagged traffic setting for a virtual machine

This command sets the isolation mode for virtual machine named TSQA01 to be VLAN. The virtual machine accepts untagged traffic, which is sent and received on VLAN 1, specified by the DefaultIsolationID parameter. Untagged traffic goes to the default compartment in the virtual machine. Multitenancy is enabled, therefore, the virtual machine receives isolation subnet and routing domain information.

PS C:\> Set-VMNetworkAdapterIsolation -VMName "TSQA01" -AllowUntaggedTraffic $True -IsolationMode VLAN -DefaultIsolationID 1 -MultiTenantStack On

Temas relacionados

Get-VmNetworkAdapterIsolation

Get-VM

Get-VMNetworkAdapter

Set-VMNetworkAdapter

Set-VMNetworkAdapterVlan